Instruction/ maintenance manual of the product XL-110 Radio Shack
Go to page of 20
Owner’s Manual Please read before using this equipment. XL-110 High Power Stereo Amplifier 12-2014.fm Page 1 Tuesday, May 9 , 2000 8:51 AM.
2 ˆ Contents Features ........... .............. .............. .............. .............. ................. .............. .............. ...... ........ .... 3 Preparation ......... .............. .............. .............. .............. ...
3 Features ˆ Features Your RadioShack High-Power Stereo A mp l i fi - er produces a total of 110 wa tts to give add- ed punch and power to your ve hicle’s existing auto sound system. The amplifier produces up to 55 watts per channel of clean, powerful sound at all a udio frequencies with mini mum distortion.
4 Preparation ˆ Preparation SUPPLIED HARDWARE Your amplifier comes with the followi ng items. Be sure you locate everything l isted before you store or dispo se of the pa cki n g mate ri al s. BEFORE Y OU BEGIN THE INSTALLATION Before you install your amplifier, read all the instructions in this owner’s manual.
5 Preparation Warning: The amplifier gets very ho t while it is on. Do not touch the a mplifier or place flammable objects near it w hile it is on. Preparing the Mounting Area In addition to th e supp.
6 Preparation Cautions: • For added safety and to protect your amplifier and auto sound system, dis- connect the cable from your vehicle’s negative ( – ) battery terminal be fore you begin. • Be sure your speakers can ha ndle as much as 1 10 watts of power (55 watts per channel).
7 Preparation using one of the supplied twist-on termi- nal connectors. This connection turns on the ampl ifier when you turn on the auto sound sys- tem, and turns off the amplifier when you turn off the auto sound system.
8 Connecting Inputs ˆ Connecting Inputs LOW-LEVEL INPUTS You can connect your auto sound system’ s low-level line out jacks to the amplifier’s low-level line in jacks. If your auto sound system does not have low-level line out jacks, see “High-Level (Speaker Wire) Inputs” on Page 9 to connect your amplifier.
9 Connecting Inputs HIGH-LEVEL (SPEAKER WIRE) INPUTS If your auto sound system does not have low-level line out jacks but has o nly speaker outputs, connect your auto sound system’s speaker outputs to the ampli fier’s HIGH IN- PUT jacks.
10 Connecting Inputs Four Speaker Outputs Floating Grou nd Connection Common Ground Con nection Auto Sound System Left Rear + Speaker Left Rear – Speaker Right Rear+ Speaker Right Rear– Speaker Wh.
11 Connecting Inputs Two Speaker Outputs Floating Grou nd Connection Common Ground Con nection Auto Sound System Left + Speaker Left – Speaker Right + Speaker Right – Speaker White/Black Gray/Black White Gray Auto Sound System Right + Speaker Left + Speaker Common Gray White/ Black White Gray/ Black 12-2014.
12 Connecting Inputs CONNECTING SPEAKERS You can connect two spea kers or a subwoof- er to the amplifier and your auto sound sys- tem. • If you are connecting two speakers, fo l- low Steps 1–3 under “Preparing the Speaker Wires” then see “Co nnecting T wo Speakers” on Page 13 to connect the speakers to the amplifier .
13 Connecting Inputs Connecting Two Speakers 1. Use a screwdriver to connect the left speake r ’s positive (+) wire to the ampl ifier ’s SPEAKER L (+ ) terminal. 2. Use a screwdriver to co nnect the left sp eaker ’s negative (–) wire to the ampl ifier ’s SPEAKER L (–) terminal.
14 Completing the Installation 2. Use a screwdriver to connect the sub- woofer ’s negative ( – ) wire to the ampli- fier ’s negative (–) terminal for th e same channel you connected in Step 1.
15 Operation Note: If yo u have not alre ady done so, be sure to mark each wire with the name of the terminal you will reconnect it to. 3. Using the mounting holes on the ampli- fier as a guide, mark the positions for the mounting holes. 4. Drill 9 / 64 -inch (3.
16 Troubleshooting 4. T u rn up the auto sound system’ s volume control until the sound begi ns to distort. Then immediately turn the volu me down to a point just be fore where the distor- tion began.
17 Troubleshooting If you still have problems, disconnect the amplifier and take it to your local Rad ioShack store for assistance. No Sound (continued). The amplifier is not properly connected to your auto sound system/vehicle. Check all connections.
18 Care ˆ Care To enjoy your amplifier for a long time: • Keep the amplifier dry . If it gets wet, wipe it dry immed iately . • Use and store the amplifier only in nor- mal temperature environments. • Handle the amplifier gently and care- fully .
19 Specifications ˆ Specifications Output Power @ 14.4 VDC 1kHz ..................................... 35 Watts × 2 @ 4 Ohms, 20–20 kHz, 0.5% TH D 55 W atts × 2 @ 4 Ohms, 20–20 kHz, 10% T HD 40 W atts × 2 @ 2 Ohms, 20–20 kHz, 1% T HD Frequency Response .
12-2014 05A00 Printed in China RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 Limited One-Y ear W arranty This product is warranted by RadioShack against manufactu ring defects in .
An important point after buying a device Radio Shack XL-110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack XL-110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack XL-110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack XL-110 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack XL-110 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack XL-110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack XL-110.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack XL-110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack XL-110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
