Instruction/ maintenance manual of the product 5335 Acer
Go to page of 154
Aspire 5735/5735Z/5335 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the updates ma de on Aspire 5735/5735Z/5335 Serie s service guide. Date Chapter Up dates.
III Copyright Copyright © 2008 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduce d, transmitted, transcribed, stored in a retrieval system, or translated into .
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read th e following general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Middle Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Removing the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Removing th e Heatsink F an Module .
IX T able of Contents Online Support Information 159 Index 161.
X T able of Contents.
Chapter 1 1 Features Below is a brief summary of the computer ’s many feature: Platform Intel® Ce ntrino® 2 process or technol ogy , featuring: • Intel ® Core ™ 2 Duo processor* • Intel ® .
2 Chapter 1 • High-definition audio supp ort • MS-Sound compatible • Built-in microphone Communication • Integrated Acer Crystal Eye webcam* • WLAN: • Acer InviLin k ™ N plify ™ 802.1 1b/g/Draf t-N* • Acer InviLin k ™ 802.1 1b/g* • WP AN: Bluetooth ® 2.
Chapter 1 3 System Block Diagram Mobile CPU Cantiga HOST BUS 667/800/1067MHz@1.05V DDR2 DIMM1 667/800 MHz 667/800MHz 667/800MHz ICH9M X4 DMI 400MHz C-Link0 ODD SATA SATA HDD SATA SATA Blue Tooth (USB) Camera (USB) USB 3 Port USB KBC ENE3310 INT. KB Touch Pad Winbond W25X16 16M Bits BIOS Launch Buttom DEBUG CONN.
4 Chapter 1 Your Acer Notebook tour After knowing your computer features, le t us show you around you r new computer . Front View Icon Item Description 1 Acer Crystal Eye webcam Web camera for video communicat ion (only for certain models). 2 Display screen Also called Liqui d-Crystal Display (LCD), displays computer output.
Chapter 1 5 Closed Front View 8 Click buttons (left and right) The left and right buttons function like the left and right mouse buttons. 9 Palmrest Comfortable support area for your hands when you use the computer . 10 S peakers Left and right speakers deliver stereo audio output.
6 Chapter 1 Left View Right View # Icon Item Description 1 External display (VGA) port Connects to a display device (e.g., external moni tor , LCD pr ojector). 2 Ethernet (RJ-45) port Connects to an Ethernet 10 /100/1000-based network. 3 USB 2.0 ports Co nnect to USB 2.
Chapter 1 7 Rear View 4 Emergency eject hole Ejects the optical drive tray when the computer is turned off. Note: Insert a paper clip to the emergency eject hole to eject the optical drive tray when the computer is of f. 5 Modem (RJ-1 1) port Connects to a phone line.
8 Chapter 1 Bottom View Icon Item Description 1 Battery bay Houses the computer's battery pack. 2 Battery r e lease latch Releases the battery for removal. 3 Battery lock Locks the battery in position. 4 Memory compartment Houses the computer's main memory .
Chapter 1 9 Indicators The computer has several easy-to-read status indicators . T he front panel indicato rs are visible even wh en the computer cover is closed. NOTE: 1. Chargi ng: The light sho ws amber when the battery is charging. 2. Fully charged : The light shows green when in AC mode.
10 Chapter 1 Touchpad basics (with two-click buttons) The following items show you how to use the to uchpad with two-click buttons. • Move your finger across the touchpad (1) to move the cursor . • Press the left (2) and right (3) buttons located beneath the touchpad to perform selection and execution functions.
Chapter 1 11 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can toggle on and off.
12 Chapter 1 Windows Keys The keyboard has two keys that perform Wi ndows-specific functions. Key Description Windows key Pressed alone, this key has the same effect as clicking on the Windo ws S tar t button; it launch es the S tart menu.
Chapter 1 13 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s co ntrols like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
14 Chapter 1 Special Key (only for certain models) Y ou can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your keyboard.
Chapter 1 15 Acer Empowering Technology The Empowering T echnology toolbar makes it easy for you to access frequently used functi ons and manage your new Acer system. Activated by pressing the Empowering Key , it provides access to the following utilitie s: NOTE: The following content is for genera l reference only .
16 Chapter 1 Empowering Technology password Y ou must set the Empowering T echnology password to use the password prot ection feature of Ace r eRecovery Management to protect your data. To set the Empowering Technology password: 1. Launch Acer eRecovery Management.
Chapter 1 17 Acer eAudio Management (only for certain models) Acer eAudio Management allows you to easily control the enhanced soun d effect s o f Dolby Home Theater on your system.
18 Chapter 1 Acer ePower Management Acer ePower Management features a straightforward user interface for con figuring your power managemen t options. T o access this utility , select Acer ePower Manag.
Chapter 1 19 Battery status 1. The quick menu shows the remaining battery life based on current usage. 2. Y ou can also launch the Acer ePower Management a ppl ication and refer to the Battery status panel located just below the power plan s.
20 Chapter 1 If you set a different p assword to enc rypt a file, but you forgot the en cryption password, you can use the Master Password to decrypt the file. NOTE: The password used to encrypt a file is the unique ke y that the system needs to decrypt it.
Chapter 1 21 • Back up factory default to CD/DVD • Back up drivers and applications to CD/DVD • Create user backup • Manage user b ackups • Restore: • Restore system to factory default •.
22 Chapter 1 Acer eSettings Management Acer eSettings Manage ment allows you to insp ect hard ware specifi cations, set BIOS passwords and modify boot options. Acer eSettings Manage ment also: • Provides a simple graphical user interface for navigation.
Chapter 1 23 Windows Mobility Center The Windows Mobil ity Center collects key mobil e-relate d system settings in one easy-to-find place, so you can quickly configure your Acer system to fit the situation as you change locations, networks or activities.
24 Chapter 1 Using the System Utilities Acer GridVista (dual-display compatible) NOTE: This feature is only available on certain models. T o enable the dual monitor feature of the notebook, firs t ensure that the second moni tor is connected, then select St art, Control Panel, Display an d click on Settings .
Chapter 1 25 NOTE: Please ensure that the resol ution setting of the second monitor is set to the ma nufacturer's recommended value..
26 Chapter 1 Hardware Specifications and Configurations Processor Throttling 50% : On= 99 C; OFF=93 C OS shut down at 105 C; H/W shot down at 1 10 .C Item Specification CPU type Intel ® Core ™ 2 Duo T5800 (2.0G)/T5900/T9400 (2.53G)/P7350 (2.0G)/P8400 (2.
Chapter 1 27 NOTE: Above table list s some system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 co uld be reversed.
28 Chapter 1 Protocol 802.1 1b+g, Draft-N Interface PCI bus (mini PCI socket for wireless module) Hard Disk Drive Interface Item V endor & Model Name HGST HTS542512K9SA00 BRONCO-B LF SEAGA TE ST91.
Chapter 1 29 T ransfer ra te (KB/sec) Sustained: Max 3.6Mbytes /sec Sustained: Max 10.08Mbytes/sec Buffer Memory 2MB Interface SA T A Applicable disc format Applicable disc format CD: CD-DA, CD-ROM, CD-ROM XA, Photo CD (multi-session), Video CD, Cd-Extra (CD+), CD-text DVD: DVD-VIDEO, DVD-ROM, DVD-R (3.
30 Chapter 1 Internal speaker / Quantity Y es/2 (1.5W spea kers) Vid e o M e mo r y Item S pecification Chipset GL45 (built-in Cantiga) Memory size depends on setu p setting Item S pecification Chipset ICH9M USB Compliancy Level 2.0 OHCI USB 1.1 and USB 2.
Chapter 1 31 Battery T ype Li-ion Pack capacity 6Cell 4400 MAH/8Cell 4800 MAH Number of battery cell 6/8 Package configuration 3 cells in series, 2 series in parallel 4 cells in series, 2 series in parallel LCD 15.4” in ch Item S pecificat ion V endor & model name CMO/AUO/LG Screen Diagonal (mm) 15.
32 Chapter 1 Suspend to RAM (S3) CPU set power down VGA Suspend PCMCIA Suspend Audio Power Down Hard Disk Power Do wn CD-ROM Power Down Super I/O Low Power mode Save to Disk (S4) Also called Hibernat ion Mode. System saves all system states and data onto the disc prior to power of f the whole system.
Chapter 2 33 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is already properly configu red and optimi zed, and you do not need to run this utility .
34 Chapter 2 Navigating the BIOS Utility There are five menu options: Informati on, Main, Security , Boot, and Exit. Follow these instructio ns: q T o choose a menu, use the left and right arrow keys. q T o choose an item, use the up and down arrow keys.
Chapter 2 35 Information The Information screen displays a summary of your computer ha rdware inform ation. NOTE: The system information is su bject to diff erent models. Parameter Description CPU T ype This field shows the CPU type and speed of the system.
36 Chapter 2 Main The Main screen allows th e user to set the system time and date as well as enable and disa ble boot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . Phoenix SecureCore(tm) Setup Utility Main Item Specific Help <T ab>, <Shift-T ab>, or <Enter> selects field.
Chapter 2 37 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: The sub-items under each de vice will not be shown if t he device control is set to d isable or auto. This is because the user is not allowed to control the settings in these cases.
38 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mpu ter from unauthorized use. NOTE: Please refer to “Remove HDD/BIOS Password” section if you need to know how to remove HDD/BIOS Password.
Chapter 2 39 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you have three tries be fore the system halts. Don’t forget your password.
40 Chapter 2 Removing a Password Follow these steps: 1. Use the w and y keys to highlig ht the Set Supervisor Password parameter and press the e key . The Set Password box appears: 2. T ype the current passwor d in the Enter Current Passwor d field and press e .
Chapter 2 41 If the current password entered does not match the actual current password, the screen will show you the Setup W arning. If the new password and confirm new password strings do not match, the screen will display the following message.
42 Chapter 2 Boot This menu allows the user to deci de the order of boot de vices to load the operatin g system. Bootable devices includes the diskette drive in module bay , the onbo ard hard disk drive and th e CD-ROM in module bay .
Chapter 2 43 Exit The Exit screen contains parameters that confirmed or discard the changes made to the parameters in the BIOS Setup Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setup and save your changes to CMOS.
44 Chapter 2 BIOS Flash Utility The BIOS flash memory upd ate is required for the following conditions: q New versions of system programs q New features or options q Restore a BIOS when it becomes corrupted. Use the Flash utility to updat e th e system BIOS flash ROM.
Chapter 2 45 Remove HDD/BIOS Utility This section provide you with remo ving HDD/BIOS method: Remove HDD Password: q If you key in wrong HDD password for three time, “HDD password error code” would display on the screen. See the image below . q If you need to solve HDD password locked problem, you can run HDD_PW .
46 Chapter 2.
Chapter 3 47 This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . Disassembly Requirements T o disassembl e the computer , .
48 Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 49 External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graph ic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicin g.
50 Chapter 3 Removing the Battery Pack 1. T urn base unit over . 2. Slide the battery lock/unlock l atch to the unlock position . 3. Slide the battery re lease latch to the release po sition to pop out the ba ttery pack, then remove the battery pack from the main unit.
Chapter 3 51 Removing the SD dummy card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot. Removing the ExpressCard dummy card 1.
52 Chapter 3 2. Pull it out from the slot. Removing the Lower Cover 1. See “Removing the Battery Pack” on page 50. 2. Remove the four captive screws and the six screws (A) on the lower cover . Ste p Size (Quantity) Co lor To r q u e 1~6 M2.5 x L8 (6) Black 3.
Chapter 3 53 3. Use a plastic screw driver to carefully pry open the lower cover. 4. Remove the lower cover from the lower case. Removing the DIMM 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52.. 3.
54 Chapter 3 4. Remove the DIMM module. Removing the WLAN Board Modules 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52.
Chapter 3 55 4. Disconnect the antenna cables from the WL AN board. NOTE: There are 2 a ntenna cables connected to the WLAN board module. The Bl ack antenna cable is connected to the MAIN connecto r and the Gray antenna cable is connecte d to the AUX connector .
56 Chapter 3 6. Detach the WLAN board from the WLAN socket. NOTE: When attaching the antenna back to the WLAN bo ar d, make sure the cable are arran ged properly . Removing the Hard Disk Drive Module 1. See “Removing the Battery Pack” on page 50. 2.
Chapter 3 57 4. Slide the hard disk drive module away from the connector . 5. Lift the hard disk drive module and remo ve it from the hard disk drive bay . NOTE: T o prevent damage to device, avoid pressing down on it or placi ng heavy objects on top of it.
58 Chapter 3 7. Remove the two screws (D) securing the hard disk to the bracket and remove the hard disk from the bracket. Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52.
Chapter 3 59 3. Use a pin and push it inside the emergency eje ct hole to eject the odd drive tray . 4. Carefully pull out the odd drive tray until the part of the module is visible and then slowly push back to close the tray into the module with the module still partially exposed.
60 Chapter 3 6. Remove the two screws (C) securing the locker bra cket and remove the locker bracket from the optica l disk drive module. Ste p Size (Quantity) Co lor To r q u e 1~2 M2 x L3 (2) Silver 1.
Chapter 3 61 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Item Screw Color Part No. A M2 x L8 Black 86.00E34.7 38 C M2 x L3 Silver 86.9A522.3R0 E M2.5 x L10 Silver 86.00F84.73A G M2 x L4 Black 86.00A02.1 40 H M2 x L3 Black 86.
62 Chapter 3 Removing the Middle Cover 1. See “Removing the Battery Pack” on page 50. 2. Use a plastic screw driver to pry loose the si de of the middle cover . 3. Carefully pry loose the middle cover from the latc hes securing it and remo ve the middle cover .
Chapter 3 63 Removing the Keyboard 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Middle Cover” on page 62. 3. Push down on the lock and release the latches securing the ke yboard to the upper case. 4. Carefully pry loose the keyboa rd and turn it over on the touchpad area.
64 Chapter 3 5. Disconnect the keyboard cable from the ma in board to remove the keyboard. Removing the Heatsink Fan Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52. 3. Disconnect the heatsink fan connector from the main board.
Chapter 3 65 4. Remove the one screw (C) securing the heatsink fan module in pla ce. 5. Carefully lift up the heatsink fan module. Removing the CPU Heatsink Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52.
66 Chapter 3 4. Remove the four screws securing the CPU heatsink module. 5. Carefully remove the heatsink module from the system. Removing the CPU 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the Lower Cove r” on page 52. 3.
Chapter 3 67 6. Lift up carefully to remove t he CPU. NOTE: When installing the CPU, make sure to insta ll the CPU with PIN 1 at the corner as shown. Removing the LCD Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51.
68 Chapter 3 9. T urn over the system and remove the two screws (A) from the bottom of the left and right hinges. 10. Disconnect the LCD cable connector from the main board.
Chapter 3 69 11 . Careful ly pull out the wireless antenna cables from the hole and release the cables from the latches. 12. Remove the two screws (E) from the left and right hinge of the LCD module. Ste p Size (Quantity) Co lor To r q u e 1~2 M2.5 x L10 (2) Silver 3.
70 Chapter 3 13. Carefully remove the L CD module from th e base unit. NOTE: When connecting the cable back to the unit, please no te that the cable should be routed well. Separating the Upper Case from the Lower Case 1. See “Removing the Battery Pack” on page 50.
Chapter 3 71 15. Disconnect the touchpad cable from the TP AD1 connector on th e main board. 16. Disconnect the LED cable from LEDCN1 on the main board.
72 Chapter 3 17. Disconnect the speaker cable from the INTSPK1 connector on the main board. 18. Remove the eleven screws (1 1 x A, 1 x G) from the bottom panel. Ste p Size (Quantity) Co lor To r q u e 1~1 1 M2.5 x L8 (1 1) Black 3.0 kgf-cm 12 M2 x L4 (1) Black 3.
Chapter 3 73 19. T urn the unit over and remove the th ree screws (G) from the top panel. 20. Gently remove the upper case from the lo wer case. Removing the LED Board 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51.
74 Chapter 3 11 . See “Removin g the Heatsink Fan Module” on page 64. 12. See “Removing the CPU Heatsink Module” on page 65. 13. See “Removing the CPU” on page 66. 14. See “Removing the LCD Module” on page 67. 15. See “Separating the Upper Case from the Lower Case” on page 70.
Chapter 3 75 18. Remove the one screw (C) securing the LED board. 19. Remove the LED board from the upper cover . Removing the Speaker Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51.
76 Chapter 3 11 . See “Removin g the Heatsink Fan Module” on page 64. 12. See “Removing the CPU Heatsink Module” on page 65. 13. See “Removing the CPU” on page 66. 14. See “Removing the LCD Module” on page 67. 15. See “Separating the Upper Case from the Lower Case” on page 70.
Chapter 3 77 18. Release the speaker cable from the latche s. 19. Remove the speaker module from the upper case. Removing the Touchpad Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51.
78 Chapter 3 13. See “Removing the CPU” on page 66. 14. See “Removing the LCD Module” on page 67. 15. See “Separating the Upper Case from the Lower Case” on page 70. 16. Remove the touchpad cable that is glued to the bracket. 17. Disconnect the touchpad cable from the touchpad board.
Chapter 3 79 18. Remove the two screws (C) securing the bracket to the upper case. 19. Remove the touchpad bracket. Ste p Size (Quantity) Co lor To r q u e 1~2 M2 x L2 (2) Silver 1.
80 Chapter 3 20. Carefully pry lo ose and remove the touch pad board. W ARNING: The touchpad board is glued to the upper case, on ly remove the touchpad board if it is defective. Removing the Modem Board 1. See “Removing the Battery Pack” on page 50.
Chapter 3 81 13. See “Removing the CPU” on page 66. 14. See “Removing the LCD Module” on page 67. 15. See “Separating the Upper Case from the Lower Case” on page 70. 16. Remove the one screw (C) securing the modem card. 17. Lift the modem board fr om the main board.
82 Chapter 3 18. Disconnect the cable from the modem board. Removing the Main Board 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52.
Chapter 3 83 17. Disconnect the USB cable from the USBCN1 connecto r on the main board . 18. Disconnect the bluetooth cable from the BLUE1 connector on the ma in board. 19. Remove the one screw (C) securing the main board in place . Ste p Size (Quantity) Co lor To r q u e 1 M2 x L3 (1) Silver 1.
84 Chapter 3 20. Carefully remove the mai n board. Removing the USB Board Module 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52.
Chapter 3 85 17. Remove the one screw (C) securing the USB board modul e to the lower case. 18. Release the USB cable from the latch. 19. Remove the USB board mod ule from the lower case. Ste p Size (Quantity) Co lor To r q u e 1 M2 x L3 (1) Silver 1.
86 Chapter 3 Removing the Bluetooth Modules 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52.
Chapter 3 87 LCD Module Disa ssembly Process LCD Module Disassembly Flowchart Screw List Item Screw Color Part No. B M2.5 x L6 Black 86.00E12.536 F M2 x L4 Silver 86.
88 Chapter 3 Removing the LCD Bezel 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52. 5.
Chapter 3 89 12. Carefully pry open the LCD bezel and pla ce the bezel on top of the LCD panel. Removing the LCD panel with the Brackets 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51.
90 Chapter 3 11 . Disconnect the cabl e from the web cam era. 12. Remove the five screws (5 x B) securing the LCD modu le. 13. Remove the LCD with the brackets from the back cover . Removing the Inverter Board and FPC Cable 1. See “Removing the Battery Pack” on page 50.
Chapter 3 91 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52. 5. See “Removing the WLAN Board Modules” on page 54. 6. See “Removing the Middle Cover” on page 62.
92 Chapter 3 13. Detach any adhesive tapes and any cable that is glued to the LCD panel..
Chapter 3 93 14. Disconnect the FPC cable from the LCD panel. Removing the LCD Brackets 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51.
94 Chapter 3 Removing the Antennas 1. See “Removing the Battery Pack” on page 50. 2. See “Removing the SD dummy card” on page 51. 3. See “Removing the ExpressCard dummy card” on page 51. 4. See “Removing the Lower Cove r” on page 52. 5.
Chapter 3 95 13. Remove the left and right antenna cables toget her with th e tapes holding them in place. NOTE: There is no n eed to remove th e antenna unless you really need to replace it. Removing the Web Camera 1. See “Removing the Battery Pack” on page 50.
96 Chapter 3 12. Remove the Web camera from the back cover ..
Chapter 4 97 Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
98 Chapter 4 System Check Procedures External Diskette Drive Check Do the following to isolate the pro blem to a controller , dr iver , o r diskette. A write-ena bled, dia gnostic diskette is required. NOTE: Make sure that the diskette does not have more than on e label attached to it.
Chapter 4 99 q External keyboard If any of these devices do not work, reconnect the cable connector and rep eat the failing o peration. Memory Check Memory errors might stop system operations, show error messages on the screen , or hang the system. 1.
100 Chapter 4 Check the Power Adapter Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figu re 1. If the voltage is not correct , replace the power ad apter . 2. If the voltage is within the range, do the following: q Replace the System board.
Chapter 4 101 Check the Battery Pack T o check the battery pack, do the following: From Software: 1. Check out the Power Management in control Panel 2. In Power Me ter , confirm that if the parame ters sh own in the scre en for Current Power Source and T otal Battery Power Remaining are correct.
102 Chapter 4 Power-On Self-Test (POST) Error Message The POST error message index lists the error message and their possible causes. The most like ly cause is listed first.
Chapter 4 103 Index of Error Messages Error Code List Error Codes Error Messages 006 Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch 2.
104 Chapter 4 System timer error RTC battery Run BIOS Setup Utility to re configure system time , then reboot system. System board Real time cl ock error RTC battery Run BIOS Setup Utility to re configure system time , then reboot system.
Chapter 4 105 Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See “Power System Check” on page 99.. Ensure every connector is connected tightl y and correctly .
106 Chapter 4 Phoenix BIOS Beep Codes Code Beeps POST Routine Description 02h V erify Real Mode 03h Disable Non-Maskable Interrupt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize .
Chapter 4 107 3Ch Advanced configuration of chipset registers 3Dh Load alternate registers wi th CMOS values 42h Initialize interrupt vectors 45h POST device initi alization 46h 2-1-2-3 Check ROM copy.
108 Chapter 4 82h Detect and install external RS232 ports 83h Configure non-MCD IDE controllers 84h Detect and install external parallel ports 85h Initialize PC-compa tible PnP ISA devices 86h Re-init.
Chapter 4 109 B9h Prepare Boot BAh Initialize DMI parameters BBh Initialize PnP Option ROMs BCh Clear parity checkers BDh Display MultiBoot menu BEh Clear screen (optional) BFh Check virus and backup .
11 0 Chapter 4 F5h Boot to Mini DOS F6h Clear Huge Seg ment F7h Boot to Full DOS Code Beeps.
Chapter 4 111 Index of Symptom-to-FRU Error Message LCD-Related Symptoms Symptom / Error Action in Sequenc e LCD backlight doesn't work LCD is too da rk LCD brightness cannot be adjuste d LCD contrast cann ot be adjusted Enter BIOS Utility to execute “Load Setup Default Settings”, then reboot system.
11 2 Chapter 4 The system doesn’t power-off. Power source (b attery pack and power adapter). See “Power System Check” on page 99. Hold and press the power switch for more than 4 seconds. System board Battery can’t be charged See “Check the Battery Pack” on page 101.
Chapter 4 11 3 The system doesn't resume from hibernation mode. See “Save to Disk (S4)” on page 32. Hard disk connectio n board Hard disk drive System board The system doesn't resume from standby mode after opening the LCD. See “Save to Disk (S4)” on page 32.
11 4 Chapter 4 NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undete rmined Problems” on page 1 16. T ou chpad does not work. Reconnect touchpad cable. T ou chpad board System board Modem-Related Symptoms Symptom / Error Action in Sequenc e Internal modem does not work correctly .
Chapter 4 11 5 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
11 6 Chapter 4 Undetermined Problems The diagnostic pr oblems does not identify wh ich adapter or device failed, wh ich installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedure s to isolate the fail i ng FRU (do not isolate non-defective FRU).
Chapter 5 11 7 Top and Bottom View Jumper and Connector Locations Chapter 5.
11 8 Chapter 5.
Chapter 5 11 9 Clearing Password Check and BIOS Recovery This section provide you the standard operating proce dures of clearing password and BIOS recovery for Aspire 5730Z/5330 Series. Aspire 57 30Z/5330 Series provide one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery .
120 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Chapter 6 121 This chapter gives you the FRU (Field Repl aceable Unit) listing in global configurations of 5730Z/5330 Series. R efer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
122 Chapter 6 Aspire 5735/5735Z/5335 Series Exploded Diagram.
Chapter 6 123 Aspire 5735/5735 Z/5335 Series FRU List Aspire 5735 Series FRU List CA TEGOR Y No. P ART NAME D ESCRIPTION A CER OEM PURCHASE NO ADAPTER ADAPTER 65W DEL T A SADP-65KB DF A LF LEVEL-4 ADT 65W SADP-65KB DF A LF DEL T A AP .06501.0 13 ADAPTER 65W 3PIN DEL T A SADP- 65KB BFJA LF LEVEL-4 FOR OBL ONL Y ADP 65W 3P SADP-65KB BFJA DEL T AP .
124 Chapter 6 TOUCHP AD BOARD SYNAPTICS TM00540-005 TOUCHP AD SYN APTICS TM00540-005 56.A TR01.001 WIRELESS LAN BOARD 512AN_MMWG SHIRLEY PEAK 5100 MM#895361 WLAN 802.1 1ABGN SHIRLEYPEAK1*2 KI.SPM01.003 WIRELESS LAN BOARD 512AG_MMWG SHIRLEY PEAK 5100 MM#897004 WLAN 802.
Chapter 6 125 POWER CORD 1 0A 250V 3PIN CHINA CORD CHINA 10A 250V 3P 27.01518.591 POWER CORD 1 0A 250V 3PIN CHINA BK CORD 10A 250V 3P CHINA BK 27.01518.701 POWER CORD 1 0A 250V 3PIN IT AL Y CORD IT AL Y 10A 250V 3P BK 27.01518.61 1 POWER CORD 1 0A 250V 3PIN IT AL Y BK CORD 10A 250V 3P IT AL Y BK 27.
126 Chapter 6 LOWER CASE W/ DC-IN CABLE&MODEM CABLE&SPEAKER RIGHT 60 LCASE ASSY CP2 60.A TR01.001 CABLES DC-IN CABLE C.A. DC IN CABLE CP2 MEC RESERVE DC-IN CABLE C.A.DC IN CABLE CP2 HL RESERVE DC-IN CABLE C.A.DC IN CABLE CP2 HT RESERVE MODEM CABLE C.
Chapter 6 127 CPU/PROCESSOR CPU INTEL CORE2DUAL P7350 PGA 2.0G 3M 1066 25W IC CPU PENRYN P7350 2.0G PGA KC.73501.DPP CPU/PROCESSOR CPU INTEL CORE2DUAL P8400 PGA 2.26G 3M 1066 25W IC CPU PENRYN P8400 2.26G PGA KC.84001.DPP CPU/PROCESSOR CPU INTEL CORE2DUAL P8600 PGA 2.
128 Chapter 6 CASE/COVER/BRACKET ASSEMBL Y HDD BRACKET 60 HDD BRK ASSY CP2 33.A TR01.003 HDD/HARD DISK DRIVE HDD 120GB 5400RPM SA T A SEAGA TE ST9120817AS LF F/ W:3.AAA HDD 120GB SG T SA T A ST9120817AS KH.12001.032 HDD/HARD DISK DRIVE HDD 120GB 5400RPM SA T A HGST HT543212L9A300 FW:C40C HDD 120GB HT543212L9A300 C40C KH.
Chapter 6 129 HDD/HARD DISK DRIVE HDD 250GB 5400RPM SA T A SEAGA TE ST9250827AS F/ W:2 .A L A HDD 250GB SG T SA T A ST9250827AS KH.25001.01 1 HDD/HARD DISK DRIVE HDD 250GB 5400RPM SA T A TOS HI BA MK2552GSX F/ W:L V010J HDD 250GB TOSHIBA MK2552GSX KH.
130 Chapter 6 KEYBOARD KEYBOARD 17KB- FV5 BLACK 105KS US INTERNA TIONAL HEBREW KB DARFON NSK-AFF0H HE HEBREW KB.I1700.005 KEYBOARD KEYBOARD 17KB- FV5 BLACK 106KS TURKISH KB DARFON NSK-AFF0T TR TURKISH KB.I1700.007 KEYBOARD KEYBOARD 17KB- FV5 BLACK 105KS THAILAND KB DARFON NSK-AFF03 TH THAI KB.
Chapter 6 131 KEYBOARD KEYBOARD 17KB- FV5 BLACK 106KS CANADIAN FRENCH KB DARFON NSK-AFF0M FC FR-CANA KB.I1700.033 KEYBOARD KEYBOARD 17KB- FV5 BLACK 106KS BRAZILIAN PORTUGUES E KB DARFON NSK-AFF1B BP BRAZ-PT KB.I1700.034 KEYBOARD KEYBOARD 17KB- FV5 BLACK 106KS BELGIUM KB DARFON NSK-AFF1A BE BELGIAN KB.
132 Chapter 6 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE RIGHT HINGE LCD R CP2 SZS 33. A TR01.004 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE LEFT HINGE LCD L CP2 LH 33.A TR01.005 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE LEFT HINGE LCD L CP2 SZS 33.
Chapter 6 133 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE RIGHT HINGE LCD R CP2 LH 33.A TR01.004 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE RIGHT HINGE LCD R CP2 SZS 33. A TR01.004 CASE/COVER/BRACKET ASSEMBL Y LCD BRACKET W/ HINGE LEFT HINGE LCD L CP2 LH 33.
134 Chapter 6 MEMORY SODIMM 1GB DDRII667 A-DA T A HYOPE1A0834Z LF SODIMM 1G HYOPE1A0834Z KN.1GB0C.005 MEMORY SODIMM 2GB DDRII667 SAMSUNG M470T5663QZ3- CE6 LF SODIMM 2G M470T5663QZ3-CE6 KN.2GB0B.003 MEMORY SODIMM 2GB DDRII667 NANY A NT2G T64U8HD0BN -3C LF (0.
Chapter 6 135.
Appendix A 136 Aspire 573 5/5735 Z/533 5 Series Model Definition and Configuration Appendix A.
App e ndix B 1 37 This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of its system functions are tested under Windows ® XP Home, Windows ® XP Pro environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
1 38 App e nd i x B Microsoft ® Windows ® Vista Environment Test Item Specification CRT Port T est CRT Monitor Acer 21 1c 21”, ViewSonic G220F , ViewSonic PF790 19” LCD Monitor Acer FP751 17” .
App e ndix B 1 39 PCMCIA T est LAN/Modem Card TDK CardBus Ethernet 10/100 32-Bit CBE-10/10 0BTX S torage Card Hitachi Microdrive 4G 1394 Card Buffalo 1394 Interface Cardbus (IFC-ILCB/DV) USB2.0 Card IBM EtherJet CardBus Adapter 10/100 Wireless Lan Card (Not recommended for wireless ready model) Cisco Wireless LAN Card 802.
1 40 App e nd i x B.
App e ndix C 1 41 This section describe s online tech ni cal support servi ces available to hel p you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your techn ical queries to your local Acer branch office. Acer Branch Offices and Regional Business Unit s may access our website.
1 42 App e ndix C.
1 43 A AFLASH Utility 44 Antennas 94 Audio 30 B Battery Pack 50 BIOS 26 vendor 26 Version 26 BIOS Utility 33–44 Navigating 34 Onboard Device Configur ation 39 Security 37, 38 System Security 43 Boar.
1 44 Model Definition 130 Modem Boar d 80 N Notebook Manager hotkey 13 num lock on indicator 9 O Online Support Information 159 P Panel 4 Bottom 8 left 4 PC Card 9 Power System Check 99 Battery Pack 1.
An important point after buying a device Acer 5335 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer 5335 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer 5335 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer 5335 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer 5335 will certainly help you make a decision on the purchase.
If you already are a holder of Acer 5335, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer 5335.
However, one of the most important roles played by the user manual is to help in solving problems with Acer 5335. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer 5335 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
