Instruction/ maintenance manual of the product 2-Line 900 MHz Handsfree Cordless Phone Radio Shack
Go to page of 24
Owner’s Manual Please read be fore using this eq uipment. 2-Line 900 MHz Handsfree Cordless Phone 43-1701.fm Page 1 Wednesday, September 20, 2 000 8:48 AM.
2 Contents ˆ Contents Features ............. .. ............ .. ............ ... .. ............ .. ......... 6 Preparation .......... ... ... ........... ... ........... ... ... ........... ... ... 7 Selecting a Location ............. ..............
3 Contents Your phone is ETL listed to UL standards and meets all applica- ble FCC standards. WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SH OCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK.
4 Contents READ THIS BEFORE INSTALLATION Each device that you connect to the phone line draws power from the phone line. We refer to this power draw as the devic e’s ringer equivalence number, or REN. The REN is on the bottom of the base. If you are using more than one phone or oth er device on the line, add up all the RENs.
5 Contents changes in advances, so yo u can take the necessary steps to prevent interruption of your teleph one service. This equipment compli es wi th the l imits for a Class B dig ital d e- vice as specified in Part 15 of FCC Rules. These limits provide reasonable protection against rad io and TV interference in a residential area.
6 Features ˆ Features Your RadioShack 2-Line 900 MHz Handsfree Cordless Phone combines the clarity of 900 MHz commun ication with portability and convenience. The phone’s cordless keypad clips to your belt or clothing so you can make and answer calls away from the unit’s base.
7 Preparation ˆ A Quick Look at the Phone ˆ Preparation SELECTING A LOCATION You can place th e phone’s base on a flat surface such as a desk, shelf, or table.
8 Preparation • near a telephone line jack • out of the way of normal activities • away from electrical machinery , electrical appliances, me tal walls, filing cabinets, wireless intercoms, security alarms, and room monitors The base’s location affects the phone’s range .
9 Preparation Cautions: Y ou must use a Class 2 power source that suppli es 15V DC and del ivers at l east 300 mA. I ts center tip must be set to positive and its plug must fi t the phone's 15V 30 0 mA jack. Using an adapt er that does not meet these speci fications could damage the phone or t he adapter .
10 Preparation To connect the battery pack, line up the slots on the battery pack with the posts on the back of the ke ypad. Press down and slide the battery pack forward until the latch clicks. To charge the ba ttery pack, place the keypad in the base’s front charging slot.
11 Preparation phone. Otherwise, the battery pack loses i ts ability to fully recharge. • If the front CHARGE indicator does not light when you place the keypad on the base, be su re the battery pa ck and AC adapter are correctly and securely connected.
12 Preparation 2. T o conne ct the new battery pack, line up the slots on the battery pack with the posts on the keypad, then p ress down and slide it forward until the latch clicks.
13 Preparation CONNECTING AND ADJUSTING THE HEADSET 1. Insert the tabs on the headset hol der into the slots on the back of the base and snap the holder into place. 2. Insert the headset’s plug into the jack on the side of the keypad. 3. Place the headset on yo ur head with the earpiece over eith er ear .
14 Preparation SETTING RING/VIBRATE/DUAL You can adjust the keypad’s ringer mode from RING V IB to RING/VIB . With the ringer se t to VIB , the phone vibrate s instead of ringing when receiving call. With the ringer se t to RING/VIB , the phone ri ngs and vibrates when receiving call.
15 Operation 1. Set T ONE/PULSE to TONE . 2. Press L1 or L2 so the indicator for that line lights a nd listen for a dial tone. 3. Press any number other than 0 or 1 . Note: If your phone system requires that you dial an access code (9, for example) before you dia l an outside number , do not press the access code either .
16 Operation When you rece ive a call on a line, the light for that line flashes and the phone rings o r vibrates (if you set the ringer for that line to ON ). Press the button for the ringing line to answer the call. The indicator for that line lights.
17 Operation USING HOLD HOLD lets you use the other line without disconnecting the call. You can alternate between the two lines by pressing HOLD , then the button for the desired line. 1. T o place a call on hold, press HOLD . The indicator for that line flashes.
18 Operation 3. T o han g up one line, press the other line’s key . Press the key again to hang up both lines. CHANGING CHANNELS Every time you press L1 or L2 , the phone automatically selects a clear channel from the 10 it u ses for communication betwee n the headset and the base.
19 Operation USING FLASH FLASH provides the electronic equivalent of a switchhook signal for special phone services such as Call Waiting. For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call.
20 Operation 2. Press and hold PA G E . The keypad rings for about 1 minute. 3. Press any key on the keypad or PA G E on the base to silence it. MEMORY DIALING You can store up to 10 numb ers of up to 16 digits each in th e phone’s memory.
21 Operation 5. You can write down the stored numbers on the memory index card undern eath the base. Note: If you hear three short beeps, you did not store the num- ber successfully.
22 Troubleshooting Note: If you use pulse dialing, be sure yo u have stored a tone entry in another memory location (see “Usi ng Tone Servi ces on a Pulse Line” on Page 19).
23 Troubleshooting If you still have proble ms, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot locate the problem, take your phone to your local RadioShack store for assistance.
RadioShack Corporation Fort Worth, Texas 76102 43-1701 08A00 Printed in China Limited One-Y ear Warran ty This product is warranted by RadioShack against manufacturing defects in material and wo rk- m.
An important point after buying a device Radio Shack 2-Line 900 MHz Handsfree Cordless Phone (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 2-Line 900 MHz Handsfree Cordless Phone yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 2-Line 900 MHz Handsfree Cordless Phone - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 2-Line 900 MHz Handsfree Cordless Phone you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 2-Line 900 MHz Handsfree Cordless Phone will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 2-Line 900 MHz Handsfree Cordless Phone, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 2-Line 900 MHz Handsfree Cordless Phone.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 2-Line 900 MHz Handsfree Cordless Phone. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 2-Line 900 MHz Handsfree Cordless Phone along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
