Instruction/ maintenance manual of the product 15-2143 Radio Shack
Go to page of 11
15-2143 Front Cover Art.
3 2 Introduction T able of Contents Thank you for buying this RadioShack Universal Remote Control. Y our remote control operates the common features of most, but not all, models and brands of IR Infrared Controlled V ideo Equipment. Y our remote may provide functions that are not available on your equipment.
5 4 TV V olume/Mute Punch-Thr ough Feature The TV V olume/Mute punch-through feature lets you control the V olume and Mute function of your TV in any mode programmed to be a VCR, DVD, CABLE or SA T device, without needing to change to TV mode. VCR/DVD Punch-Through Feature Punch-through to VCR/DVD mode i.
7 6 VOLUME UP/ DOWN Changes the volume level of the product, normally the TV . CHANNEL UP/ DOWN Changes the channels. RECORD, PLA Y , STOP , REW , FF , P AUSE VCR control buttons operate your VCR even when the remote is set to operate the TV . Also operates DVD Scan -/+.
9 8 Using the Advanced Functions Advanced Functions, cont. DVD Functions SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively . CHAPTER+ and CHAPTER- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.
11 10 Code Search If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1 . Manually turn on the device ( TV , VCR , etc.) to be controlled.
13 12 Searching Codes by Brand Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer . 1 . T urn on the device ( TV , VCR , etc.) to be controlled. 2 . Press and hold the CODE SEARCH button until the red indicator remains on, then release CODE SEARCH button.
15 14 Using the Sleep Timer Code Identification Feature The Code Identification Feature allows you to identify the three digit library code stored under your device key . For example, if you want to find out what three-digit code is stored under your TV device key , follow the six steps below: 1 .
17 16 T o Operate: 1 . Press the TV , VCR / DVD , or SA T/ CBL button (depending on which product you want to operate). 2 . Point the remote towards the product and press POWER to turn on the product. 4 . Use the other buttons to operate the features of your product.
19 18 Notes RadioShack W arranty R adioShack W ARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MA TERIAL AND WORKMAN- SHIP FOR A PERIOD OF ONE 90 DA YS FROM THE ORIGINAL DA TE OF PURCHASE A T RET AIL.
15-2143 Back Cover Art.
An important point after buying a device Radio Shack 15-2143 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 15-2143 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 15-2143 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 15-2143 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 15-2143 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 15-2143, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 15-2143.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 15-2143. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 15-2143 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
