Instruction/ maintenance manual of the product 528T Acer
Go to page of 8
AcerHub 528B/528T 10Mbps Ethernet Hub User's Guide The 8-port 10Base-T & 1-port 10Base2 Ethernet hub.
2 Federal Communications Commission Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
3 Features of AcerHub 528B/528T • Comply with IEEE 802.3 Ethernet 10BASE-T and 10BASE2 standards • Compact size for desktop or wall mounting • Plug and play, no configuration required • 8 10Ba.
4 The Rear Panel of AcerHub 528 1. RJ-45 Ports The hub is equipped with 8 10Base-T (RJ-45) ports for making hub- to-workstation connections. 2. Cascade Enabling Slide-Switch Slide this switch to the right (marked as “Cascade”) to enable port No. 9 to cascade with another hub or LAN switch.
5 refer to following figure for an illustration of such a connection. 4. Take caution that you need to attach a 50ohm terminator on both ends of the BNC cable. Note: If port1 (BNC PORT) does not connect to the coaxial cable after power is applied to the hub, port1 (BNC PORT) Partition LED will be blinking.
6 Specifications of AcerHub 528B/528T :.
Product Limited Warranty Acer Netxus Incorporated (ANI) warrants its product to be free from defects in materials and workmanship, under normal use and service, for the following lengths of time from the date of purchase from ANI or its Authorized Resellers.
If you purchased this product in the UNITEDSTATES, some states do not allow the limitation or exclusion of liability for incidental consequential damages, so the above limitation may not apply to you. Contact us: Acer Computer International Ltd. Taiwan Branch Tel: 886-2-2713 9099 ext.
An important point after buying a device Acer 528T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer 528T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer 528T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer 528T you will learn all the available features of the product, as well as information on its operation. The information that you get Acer 528T will certainly help you make a decision on the purchase.
If you already are a holder of Acer 528T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer 528T.
However, one of the most important roles played by the user manual is to help in solving problems with Acer 528T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer 528T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
