Instruction/ maintenance manual of the product ISA500Ti QSC Audio
Go to page of 2
Features • Four models for low impedance applications • ISA13 50 drives 7 0 volt lines directly with 1 500 watts per channel • Three “Ti” versions include low impedance and isolated 25, 7 0,.
ISA2 80 ISA45 0 ISA7 50 ISA1 350 ISA3 00Ti ISA500T i IS A800Ti Stereo Mode (both channels driven) Continuous average output power per channel 8 Ω / 20 Hz - 20 kHz / 0.
An important point after buying a device QSC Audio ISA500Ti (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QSC Audio ISA500Ti yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QSC Audio ISA500Ti - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QSC Audio ISA500Ti you will learn all the available features of the product, as well as information on its operation. The information that you get QSC Audio ISA500Ti will certainly help you make a decision on the purchase.
If you already are a holder of QSC Audio ISA500Ti, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QSC Audio ISA500Ti.
However, one of the most important roles played by the user manual is to help in solving problems with QSC Audio ISA500Ti. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QSC Audio ISA500Ti along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
