Instruction/ maintenance manual of the product AD-S282H QSC Audio
Go to page of 16
*TD-000148-00* TD-000148-00 rev .B High-power T wo-way Multi-Use Loudspeaker • two 8-inch (203mm) neodymium magnet low-frequency drivers • 1-inch throat compre ssion high-frequency driver • yoke mount I-282H Speakon ® input, pole cup, and floor -mount sw ivel feet.
2 IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS 1- Read these instructio ns. 2- Keep these instructio ns. 3- Heed all warnings. 4- Follow all instructio ns. 5- Clean only with a dry c loth. 6- Install in accorda nce with QSC Audio Product’ s instructions and a l icensed, professional enginee r .
3 Introduction Thank you and congratulations on your purchase of the I-282H, AD-S282H, or AD-S282HT multi-use, weather resistant loudspeakers. These products represent the state-of-the-art in lightweight sound reinforcement loudspeaker systems. T o get the most from your investment, we encourage you to review this manual carefully .
4 Coverage Angles Before mounting the loudspeaker , determine the mounting orientation and desired coverage angles. As supplied from the factory , the loudspeak er’ s coverage angles are 90° (horizontal) x 60° (vertical) with the cabinet oriented vertically .
5 Mounting IMPORT ANT! ENSURE THA T THE LOUDSPEAKER IS MOUNTED PROPERL Y AND A SAFETY CABLE IS INST ALLED TO RET AIN THE LOUDSPEAKER IN THE EVENT OF A MOUNT- ING FAILURE. CO NSUL T A LICENSED, PR OFESSIONAL ENGI- NEER WHEN ANY DOUBT OR QUESTIONS ARISE REGARDING A PHYSICAL EQUI PMENT INST ALLA TION.
6 Input Connection Cover (AD-S282H/HT models) The loudspeaker includes a weather resistant cover for the input terminals. If using the cover , be sure to pass the wiring through the bushing nut, bushing, cover , and gasket before making connections.
7 Connection I-282H P ASSIVE: Set the BI-AMP / PA S S I V E selector switch to PA S S I V E . Con- nect the full-range + input signal to Speakon pin 1+ and the full range - input signal to Speakon pin 1-.
8 Specifications- AD-S282H (passive), AD-S282HT , I-282H (passive) Frequency Range: 80- 27.7k Hz (-6 dB, free field response) 60- 29.5k Hz (-10 dB, free field response) Maximum Output 2 : 119dB SPL continuous rms output (calculated) 125dB SPL peak output (calculated) Impedance: 8 ohms nominal 5.
9 Specifications- AD-S282H and I-282H with Recommended Signal Processing Low Frequency Drivers ( parallel) High Frequency Driver Frequency Range: 70- 2.1k Hz (-6 dB, free field response) 2. 1k- 24.0k Hz (-6 dB, free field response) 60- 2.7k Hz (-10 dB, free field response) 1.
10 Dimensions Specifications are subj ect to change witho ut notice..
11 Frequency (Hertz) Frequency (Hertz) SPL Impedance SPL (dB) SPL (dB) Impedance (ohms) On-axis Respon se and Impedance Vs. Frequency , Passive I-282H, AD-S282H, and AD-S282HT Beam width, Response, and Impedance Curves Specifications are subjec t to change without noti ce.
12 Frequency (Hertz) Frequency (Hertz) Horizontal V er tical Beamwidth (degrees) On Axis 15° Off Axis 30° Off Axis Response On-Axis, 15° , 30° ,45°, and 60° Off-Axis Vs.
13 Painting the Loudspeaker The loudspeaker enclosure, grill, and mount can be painted to matc h any decor , provided the following precautions are observed. The cabinet is made of high impact polystyrene which requires c ontrolled painting procedures in order to obtain good results.
14 Notes:.
15 Notes:.
QSC Audio Products, Inc. 1675 MacArthur Boul evard Costa Mesa, California 92626 USA ©2004, 2006 “QSC” and the QSC logo are register ed with the U.S. Patent and T rademark Office. Mailing address / Dirección postal / Adresse postale / 通信地址 : QSC Audio Products, Inc.
An important point after buying a device QSC Audio AD-S282H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QSC Audio AD-S282H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QSC Audio AD-S282H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QSC Audio AD-S282H you will learn all the available features of the product, as well as information on its operation. The information that you get QSC Audio AD-S282H will certainly help you make a decision on the purchase.
If you already are a holder of QSC Audio AD-S282H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QSC Audio AD-S282H.
However, one of the most important roles played by the user manual is to help in solving problems with QSC Audio AD-S282H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QSC Audio AD-S282H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
