Instruction/ maintenance manual of the product TS-419P Turbo NAS QNAP
Go to page of 49
QNAP Turbo NAS Hardware User Manual ©Copyright 2010. QNAP Systems, Inc. All Rights Reserved..
T hank you for choosing QNAP products! This user manual provides description of the hardware of the T urbo NAS and relev ant guideline of certain functions.
DIS CLAIMER In no event shall th e liability of QNAP Syst ems, Inc. (QNAP) exceed the price paid for the product from direct, indi rect, special, incidental, or consequential software, or its documentation.
Regulat ory Notice FCC STATEMENT This equipment has been test ed and found to comply with the limits for a Class B digital device, pursuant to P art 15 of F CC Rules. These limits are designed to provide reasonable protection again st harmful in terference in a resident ial installation.
Symbols in this document Wa r n i n g This icon indicates the inst ructions must be strictly followe d. F ailure to do so could result in inju ry to human body or death. Caution This icon indicates th e action may lead to disk clearance or loss OR failure to follow the instructions could result in data damage, disk damage, or product damage.
Table of Contents Table of Contents ..................................................................................... 6 Safety Warnings ....................................................................................... 7 Chapter 1. CPU and Memory Specifications .
Safety Warnings 1. The NAS can oper ate normally in the temperature of 0ºC –40ºC and relative humidity of 0%–95%. Please make sure the environment is well- ventilated. 2. The power cord and devices connected to the NA S must provide correct supply voltage (100W , 90–264V).
Chapter 1. CPU and Memory Specifications Caution: Modifying the hardw are, software, or firmw are of your QNAP products will void your warranty . QNAP is not responsible for any form of damage or loss of data ca used by modding the QNAP p roducts.
Syst em TS-119 TS-219P TS-419P/TS-419U CPU Marvell 1.2GHz Marvell 1.2GHz Marvell 1.2GHz Memory 512MB DDRII 512MB DDRII 512MB DDRII Flash 16MB 16MB 16MB CPU replaceable No No No Memory replaceable No N.
Syst em TS-239 Pro SS-439 Pro/ TS-439 Pro/ TS-439U-RP/ TS-439U-SP TS-239 Pro II TS-439 Pro II CPU Intel Atom processor (1.6GHz) Intel Atom processor (1.
Syst em TS-639 Pro SS-839 Pro CPU Intel Atom processor (1.6GHz) Intel Atom processor (1.6GHz) Memory 1GB DDRII 2GB DDRII Flash 128MB (IDE DOM) 128MB (IDE DOM) CPU replaceab le No No Memory replacea bl.
Syst em TS-259 Pro TS-459 Pro TS-459U-RP/SP CPU Dual core Int el Atom processor (1.66GHz) Dual core Int el Atom processor (1.66GHz) Dual core Int el Atom processor (1.
System TS-259 Pro+ TS-459 Pro+ TS-559 P ro+ TS-659 Pro+ CPU Dual core Intel Atom processor (1.8GHz) Dual core Intel Atom processor (1.8GHz) Dual core Intel Atom processor (1.
Chapter 2. Power Button and Reset Button Behaviour Power b utton: Press to turn on or turn off . System Power button (Turn on) Power button (Hardware turn off) Power button (Force turn off) All models Press once 1.5 sec 5 sec R eset button: Press to reset the s ystem settings.
Advanced system reset (10 sec) When you press the reset butt on for 10 seconds, you will hear two beeps at t he third and the tenth seconds. The NAS will reset all the system settings to default as it does by web-based system reset in “ Adminis tr ation” > “R estore to F actory Defa ult” except all the data are reserved.
Chapter 3. USB One Touch C opy System Number of seconds (press the one touch copy button to trigger data copy) All NAS models 0.5 sec Data Copy by the Front USB Por t The NAS supports instant da ta copy backup from the ex ternal USB device to the NAS or the other w ay round by t he front one touch copy button.
Chapter 4. LED and Alarm Buzzer Specifications The LED indicators of th e NAS indicate th e system status a nd information. When the NAS is turned on, check the following items to make sure the system status is normal.
Or ange The NAS is connected to the network LAN Orange Flashes orange The NAS is being accessed from the network Flashes red The disk data is being accessed and a read/write error occurs during the pr.
Beep alarm: All NAS models The beep alarm can be disabled in “Sys tem Administra tion” > “Hardware Settings” . Beep sound Number of Times Description Short beep (0.5 sec) 1 1. The NAS is starting up 2. The NAS is being shut down (software shutdown) 3.
Chapter 5. Hot-swap Hard Drives QNAP NAS is compatible with 2.5-inch/3.5 -inch SA T A hard disk drives from major hard disk br ands. F or the updated HDD compatibili ty list, please visit http://www .
The NA S supports hot -swapping the hard drives when 1 member drive crashes in RAID 1, 1–2 mem ber driv es cras h in RAI D 5 or RAID 6. Fo llow the steps below to hot-swap the hard drive when a member drive fails in a RAID configu ration. 1. Login the NAS and check th e disk volume configuration in “V olume Management” .
Chapter 6. RAID Recovery QNAP NAS supports exclusive RAID recovery technology to recover a f ailed RAID disk volume from unin tentional disconnect ion or removal of the hard drives from the system.
Sta ndard RAID 5 QNAP RAID 5 Standard RAID 6 QNAP RAID 6 Degraded mode N-1 N-1 N-1 & N-2 N-1 & N-2 Rea d O n l y Protection (for immediate data backup & HDD replacement) N/A N-1, bad blocks found in the surviving drives of the arra y . N/A N-2, bad blocks found in the surviving drives of the arra y .
Chapter 7. Use the LCD Panel This feature is only provided by TS-439 Pr o , TS-439 Pro II, TS-459 Pro , TS-509 Pro, TS-559 Pro, TS-639 Pro, TS-659 Pro , SS-839 Pro, TS-859 Pro, TS-809 Pro , TS-809U-RP , TS-859U-RP , TS-259 Pro+, TS-459 Pro+, TS-559 Pro+, TS-659 Pro+.
For example, when you turn on the NAS with 5 hard driv es installed, the LCD panel shows: C o n f i g . D i s k s ? → R A I D 5 You can press the “Select” button to brow se m ore options, for example, RAID 6. Press the “Enter” button and the following message sho ws.
View s ystem information by the LCD panel When the LCD panel shows th e server name and IP address, you may press the “Enter” button to e nter the Main Menu. The Main Menu consists of t he following items: 1. TCP/IP 2. Physical disk 3. Volume 4. System 5.
2. Physical disk In Physical disk, yo u can view the followi ng options: Disk Info Back to Main Menu The disk info shows the temperature an d the c apacity of the hard drive. D i s k : 1 T e m p : 5 0 ° C S i z e : 2 3 2 G B 3. Volume This section shows the disk configuration of the NAS.
4. Syst em This section shows the system temper ature and the rotation speed of the system fan. C P U T e m p : 5 0 ° C S y s T e m p : 5 5 ° C S y s F a n : 8 6 5 R P M 5. Shut down Use this option to turn off the NAS. Pr ess the “Select” button to select “Yes”.
Syst em Messages When the NAS encounters syst em error, an error message will be shown on the LCD panel. Press the “Enter” button to view the m essage. Press the “Enter” button again to view the next message. S y s t e m E r r o r ! P l s . C h e c k L o g s System Message Description Sys.
Chapter 8. Install Power Supply Unit * This section applies to rack mount NAS models only. 1U Turbo NAS T o inst all a redundant power su pply unit to the 1U T urbo NAS, follow the steps below . 1. T urn off t he NAS. 2. Re move the screw and dummy plate.
Warning: The NAS supports replacing the redu ndant power supply unit without tu rning off th e server when redu ndant pow er supply mode is enabled. However , you are st rongly recommended to turn OFF the NAS before replacing the power supply unit t o reduce the risk of electric shock.
4. Plug in the new power supply to the NA S. 5. F asten the screw on the power su pply in clock wise direction. 6. Tu r n o n t h e N A S . 32.
Enable warning aler t for redundant power supply on the web-based interface: If you ha ve installed two power sup ply units (PSU) on the NA S and connected them to the power sock ets, both PSU will suppl y the power to the NAS (applied to 1U and 2U models).
The foll owing description applies to 1U NAS models only. (1) Power supply indicators: Green (left) power indicator: Indicates the power supply unit is in normal status. Re d (right) power indicator: Indicates the power supply unit is in abnormal status.
Technical Support QNAP provides dedicated online support and c ustomer service via instant messenger . Y ou can c ontact us by the following means : Online Support: htt p://www.qnap.com/ MSN: q.support@hotmail .com Skype: qnapskype For u m : http://forum.
GNU GENERAL PUBLIC LICENSE V ersion 3, 29 June 200 7 Copyright © 2007 Free Software Found ation, Inc. <http://fsf .org/> Everyone is permitted to co py and distribute verbatim copi es of this license document, but changing it is not allowed.
Dev elopers that use the GNU GPL protect your ri ghts with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal perm ission to copy , distribute and/or modify it. For the de velopers' and authors' protection, the GPL clearly explains that there is no warr anty for this free software.
T o “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other th an the making of an exact copy . The resulting work is called a “ modified version” of the earlie r work or a work “based on” the earlier work.
the work with that Maj or Component, or to implement a Standard I nterface for which an implementa tion is available to the public in source code f orm.
terms tha t prohibit them from maki ng an y copies of your copyrighted material outside their relationship wi th you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not al lowed; section 10 makes it unnecessary .
Li cense and any condi tions added under se ction 7. This requirement modifies the requirement in sect ion 4 to “keep intact all notices” . c) Y ou must license the entire work, as a whole, under this Li cense to anyone w ho comes into possession of a copy .
n oncommercially , and on ly if you received the object code wit h such an off er , in accord with subsection 6b. d) Convey the object code by o ffering access from a designated place (gr atis or for a charge), and offer equiv alent access to the Co rresponding Source in the same wa y through the same place at no further charge .
If you convey an object code work under this section in, or wit h, or specifically fo r use in, a User Produ ct, and the conveying occurs as part of a transaction in which the right of possession and .
suppl ement the terms of this Li cense with terms: a) Disclaiming warranty or limiting liabil ity differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of spec.
lic enses granted under the third paragr aph of section 11). However , if you cease all violation of th is License, then your license from a particular copyright holder is reinst ated (a) provisionall.
whate ver licenses to the work the party's pr edecessor in interest had or could give under the previous par agraph, pl us a ri ght to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or ca n get it with re asonable efforts.
and u nder the terms of this License, throug h a publicly available network server or other readily accessible means, then you must either (1) cause the Co rresponding Source to be so av ailable, or (.
simu ltaneously your obligations un der this License and any other pertinent obligations, t hen as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to c.
49 COPYRIGHT HOLDERS AND/OR O THER P ARTIES PROVIDE THE PROGRAM “ AS IS” WITHOUT W ARRANTY OF ANY KIND , EITHER EXPRESS ED OR IMPLIED , INCLUDING, BUT NO T LIMITED TO , THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FO R A PAR TICULAR PURPOSE.
An important point after buying a device QNAP TS-419P Turbo NAS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QNAP TS-419P Turbo NAS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QNAP TS-419P Turbo NAS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QNAP TS-419P Turbo NAS you will learn all the available features of the product, as well as information on its operation. The information that you get QNAP TS-419P Turbo NAS will certainly help you make a decision on the purchase.
If you already are a holder of QNAP TS-419P Turbo NAS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QNAP TS-419P Turbo NAS.
However, one of the most important roles played by the user manual is to help in solving problems with QNAP TS-419P Turbo NAS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QNAP TS-419P Turbo NAS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
