Instruction/ maintenance manual of the product QSD9004V Q-See
Go to page of 5
Q-See is a registered trademark of Digital Peripheral Solutions, Inc. Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www .Q-See.com Quick Start Guide 1 Set Up 2 Connect 3 Enjoy Quick Start Guide – Remote Internet Monitoring H .
1 Set Up If you are accessing the DVR from a computer attached to the same router as the DVR, then you only need to setup the information in the NETWORK settings by using either the DHCP option, or assigning a static IP (See instructions below).
Page 3 4 Option 4: DDNS: Y ou can access the DVR through a static or dynamic IP address; however a dynamic address can change from time to time. How often it changes will depend on your Internet Service Provider . When the IP address changes, you can determine your new IP address by going to www .
T o connect to the DVR from a remote computer , you would then open an Internet Explorer browser window and enter the Internet IP of your router that you received by going to www .
Q-See is a registered trademark of Digital Peripheral Solutions, Inc. Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www .Q-See.com 3 Enjoy This Q-See product has undergone extensive quality control. If you have any issues during the setup process, please contact our support department before returning the product.
An important point after buying a device Q-See QSD9004V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-See QSD9004V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-See QSD9004V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-See QSD9004V you will learn all the available features of the product, as well as information on its operation. The information that you get Q-See QSD9004V will certainly help you make a decision on the purchase.
If you already are a holder of Q-See QSD9004V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-See QSD9004V.
However, one of the most important roles played by the user manual is to help in solving problems with Q-See QSD9004V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-See QSD9004V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
