Instruction/ maintenance manual of the product ISR6250 Q-Logic
Go to page of 16
[ Quick Start Guide ] QUICK START GUIDE z INTELLIGENT STORAGE ROUTER INSTALL ATION iSR6250.
Purchasers of OEM products should consult with the OEM for suppor t. Please feel free to c ontact your QLogic approv ed reseller or QLogic T echnical Support at any phase of in tegration for assistance. QLog ic T echnical Support can be reache d by the following methods: Web http://support.
3 Quick S t art Guide The iSR6250 is an intelligent storage router that provides servers with iSCSI connectivit y to SAN-attached Fibre Channel-based disk or tape storage. Suggested Configurations Figure 1 shows the iSR6250 connecting iSCSI servers to a direct-att ached storage array .
4 Installation Instructions This Quick Start Guide describes how to install and confi gure your new QLogic iSR6250 router by following these steps: ❑ Step 1. Verify the packa ge contents. ❑ Step 2. Complete the pre-installation checklist. ❑ Step 3.
5 IP address of the iSNS server for iSCSI port 2 (if iSNS will be enabled) iSCSI port 3 IP address, subnet mask, and gateway for the 10GbE-1 port IP address of the iSNS server for iSCSI port 3 (if iSN.
6 Step 3. Mount the Router Mount the router in the rack using the ra ck mount kit with instructions provided. Step 4. Install the SFPs An SFP transceiver is required for each rout er port that will be connected to a Fi bre Channel device or switch. SFPs are included in the package.
7 Figure 4. iSR6250 Blade Ports and LEDs 4. Verify that the router’ s input power LED is illuminated. The iSR6250 rout er runs its self test and begins normal operation—this may take a minute. 5. Verify that the heartbeat LED is blinking (once per second) and that the system fault LED i s not illuminated.
8 Step 7. Configure iSR6250 Man agement Port IP Address 1. Connect the router’ s Management Port (10/100 Ethernet) to your workstation using a switch or hub. As an alternative, you may connect your wo rkstation directly to the router using an Ethernet crossover cable.
9 Step 8. Run the Configuration Wizard 1. Start the SANsurfer ® Router Manager previously installed on the computer that will manage th e iSR6250. Y ou should see a display as shown in the following figures. 2. Click the Connect button on the top-left corner .
10 6. Enter the Symbolic Name for this rout er . 7. Select each iSCSI port and us e the wizard to enter IP addresses for the iSC SI port, and optionally , the IP address of an iSNS ser ver . NOTE: QLogic recommends that you en able Flow C ontrol for your 10GbE interf aces (10GbE1 and 10GbE2 ports).
11 Step 9. Present LUNs to iSCSI Initiators 1. If the iSR6250 is connected in the FC fabric, make sure the FC fabric zoning is set so that FC storage array ports and router FC ports are in the same z one. 2. Using storage array mana gement software, create all LUNs you want to present to all iSCSI initi ators through this iSR6250.
12 c. Launch the Presentation Wizar d from the Wizard s drop-down menu. This wizard allows you to map a LUN to the iSCSI initiator on y our server . The screen that allows this mapping looks like this: d. Save the mappings using your manageme nt password.
13 e. Refresh the SANsurfer Router Manager display . Now, when you sel ect your iSCSI initiator on the LHS of the display , you shou ld be able to se e the LUNs mapp ed to that in itiator as fo llows: f. Return to the Windows Se rver screen and select LogOn to log on to this t arget.
14 T roubleshooting and T echnical Support For technical support, visit the Q Logic website, support. qlogic.com or send an email to support@qlogic.co m . Warranty The QLogic iSR6250 router comes with a standard one-year QL ogic warranty , or as specified by other agreements.
© 2009 QLogic Corporation. QLogic, the QLo gic logo, SA Nbox, an d Enterprise Fabric Suite 2007 are registered trademarks or trademarks of QLogic Corporation. All ot her bra nds and product na mes are trademarks or registered trademarks of their respective owners.
*SN0054545-00 A* QLogic Corporation 26650 Aliso Vi ejo Parkway Aliso Viejo, CA 92656 949.389.6000 ww w .qlogic.com SN0054545-00 A.
An important point after buying a device Q-Logic ISR6250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-Logic ISR6250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-Logic ISR6250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-Logic ISR6250 you will learn all the available features of the product, as well as information on its operation. The information that you get Q-Logic ISR6250 will certainly help you make a decision on the purchase.
If you already are a holder of Q-Logic ISR6250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-Logic ISR6250.
However, one of the most important roles played by the user manual is to help in solving problems with Q-Logic ISR6250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-Logic ISR6250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center