Instruction/ maintenance manual of the product 9040 Q-Logic
Go to page of 12
[ Quick Start Guide ] QUICK START GUIDE SilverStorm™ 9040 INSTALLATION d.
Purchasers of OEM products should consult with th e OEM for sup port. Support Headquarters QLogic Cor poration 4601 Dean Lakes Blvd Shakopee, MN 55379 QLogic W eb Site www .qlogic.com T echnical Support Web Site support.qlogic.com T echnical Support Email support@qlogic.
1 SilverS torm 9040 Quick S t art Guide Pre-Installation Checklist Before beginning the actual installation, the Site Im plementation Engineer must perform the following tasks: Step 1. Check the packing list to ve rify all ordered equipment has been received.
2 Step 4. V erify that the equipmen t shipped matches the packing list. T ools and Equipment Required ❑ An ESD wrist strap ❑ A #2 Phillips screwdriver ❑ Pen (felt-tip) to mark the mounti ng hole.
3 Changing the IP Address and Default Gateway Using the RS232 Serial P ort Step 1. Connect null-modem/crossover serial cables to the RS-232 port of the switch spine module. If using a terminal emulation device, the settings should be: ❑ 8 data bits ❑ no parity bits ❑ 1 stop bit ❑ 56K baud ❑ Use VT100 emulation.
4 Step 4. The system prompts for a user name . In order to change the IP address and def ault gateway , the user must be logg ed in as the administrator . A t the prompt enter: admin Step 5. The system prompts for a password. At the prompt enter: adminpass The system responds with: Welcome to the SilverStorm 9040 CLI.
5 Step 4. From the main menu select OOB LAN IP then Set OOB LAN IP . The following screen is displayed: Figure 1. Set OOB LAN IP Window Step 5. T ype in the new switch IP address.
6 Installing Documentation from a CD Installing Documentation on a Linux Host Step 1. Place the Documentation CD in the CD-ROM drive. Step 2. Check that the CD has been mounted. T ype ls /mnt/cdrom . The system returns a list of files on the CD . Step 3.
7 Declaration of Conformity QLogic Corporation. 26650 Aliso Viejo Pa rkway Aliso Viejo, CA 92656 Phone: 949.389.6000 www.qlogic.com QLogic Corporation dec lares the following product is in compliance with the following stan dards.
8.
© 2007 QLogic Corporation. QLogic, the QLogic logo , the Powered by QLogic logo, SANbox, SANsurfer , and SANsurfer Management Suite are regist ered trademarks or trademarks of QLogic Corporation. All other br ands and product names are trademarks or registered trademar ks of their respective owners .
J QLogic Corporation 26650 Aliso Viejo P arkway Aliso Viejo, CA 92656 949.389.6000 www .qlogic.com D000010-004 Rev . A.
An important point after buying a device Q-Logic 9040 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-Logic 9040 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-Logic 9040 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-Logic 9040 you will learn all the available features of the product, as well as information on its operation. The information that you get Q-Logic 9040 will certainly help you make a decision on the purchase.
If you already are a holder of Q-Logic 9040, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-Logic 9040.
However, one of the most important roles played by the user manual is to help in solving problems with Q-Logic 9040. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-Logic 9040 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
