Instruction/ maintenance manual of the product PB 610 SX Pyramid
Go to page of 17
COMPETITION AMPLIFIER 2-OHM ST ABILITY OWNER’S MANUAL PB 310 SX PB 610 SX PB 800 SX PB 1000 SX.
-1- Thank y ou for purchasing a Pyramid car audio amplif ier . Rest assured y ou have purchased a quality pr oduct designed and engi- neered to giv e y ou many y ear s of uncompr omised musical ser vice.
-2- This unit w as designed to operate eff iciently a t loads do wn to 2 ohms . What this means is that y ou can do an ins tallation of FOUR-8 oh m speak- er s per channel using parallel wiring or TWO-4 ohm speak er s per channel in parallel. When operating at 2 ohms , the amplif ier to increase their po wer output b y a ppr oximately 50 percent.
-3- FEA TURES PYRAMID SERIES PB 310 SX • TWO CHANNEL BRIDGEABLE AMPLIFIER • 300 W ATTS X 2 OUTPUT • 600 W ATTS X 1 BRIDGED OUTPUT • V ARIABLE GAIN CONTROL • REMO TE TURN ON/OFF • 2 OHM STE.
-4- FEA TURES PYRAMID SERIES PB 610 SX • FOUR CHANNEL BRIDGEABLE AMPLIFIER • 250 W A TTS X 4 OUTPUT OR • 500 W A TTS X 2 BRIDGED OR • 250 W A TTS X 2 + 1 X 500 W • V ARIABLE GAIN CONTROL •.
-5- FEA TURES PYRAMID SERIES PB 800 SX • FOUR CHANNEL BRIDGEABLE AMPLIFIER • 300 W ATTS X 4 OUTPUT OR • 600 W ATTS X 2 BRIDGED OR • 300 W ATTS X 2 + 1 X 600 W • V ARIABLE GAIN CONTROL • RE.
-6- FEA TURES PYRAMID SERIES PB1000 SX • FOUR CHANNEL BRIDGEABLE AMPLIFIER • 400 W A TTS X 4 OUTPUT OR • 800 W A TTS X 2 BRIDGED OR • 400 W A TTS X 2 + 1 X 800 W • V ARIABLE GAIN CONTROL •.
-7- CONNECTIONS PB310SX PB310SX STEREO MODE.
-8- CONNECTIONS PB310SX PB310SX BRIDGED MODE SPEAKERS NEGATIVE TERMINALS ON AMPLIFIER ARE NOT USED IN BRIDGE D MODE BRIDGING IS DONE BY SUMMING POSITIVES. CONNECT THE NEGA TIVE SPEAKER TERMINAL TO THE POSITIVE TERMINAL OF CH2 (R-CH) ON THE AMPLIFIER BE SURE T O SELECT BRIDGED SWITCH KNOB FOR PROPER OPERA TION.
-9- CONNECTIONS PB610SX/ PB800SX/ PB1000SX PB610SX/ PB800SX/ PB1000SX STEREO MODE NOTE: REMO TE BASS BOOST IS A FEA TURE OF PB800SX AND PB1000SX.
-10- CONNECTIONS PB610SX/ PB800SX/ PB1000SX PB610SX/ PB800SX/ PB1000SX BRIDGED MODE A. TWO-SPEAKER SYSTEM.
-11- CONNECTIONS PB610SX/ PB800SX/ PB1000SX PB610SX/ PB800SX/ PB1000SX BRIDGED MODE B. THREE-SPEAKER SYSTEM.
-12- MECHANICAL INST ALLA TION PYRAMID SERIES Mark the locations for the mounting scre w holes by holding the AMPLI- FIER in place and using a scribe or one of the mounting screws inser ted in each mounting hole in tur n to mark the mounting surf ace.
-13- ELECTRICAL INST ALLA TION PYRAMID SERIES 1. Connect the po wer gr ound ter minal to the nearest point on the chassis of the car k eep this ground wire less than one meter(39") in length. Use #8 wire. 2 . Connect the r emote ter minal to the remote output of the head unit using #14 wire.
-14- SPECIFICA TIONS PYRAMID SERIES PB310SX PB610SX PB800SX PB1000SX RMS Po w er per channel 2 x 150 4 x 125 4 x 150 4 x 200 at 4 Ohms Peak P o wer per channel 2 x 300 4 x 250 4 x 300 4 x 400 at 4 Ohm.
-15- TROUBLE SHOOTING GUIDE PYRAMID SERIES SYMPTOM: Amp turning off at low volume le vels No Sound No Sound No sound in one chan- nel Amp turning off at me- dium or high v olume lev els CHECK: Check s.
www .pyramidcaraudio .com.
An important point after buying a device Pyramid PB 610 SX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyramid PB 610 SX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyramid PB 610 SX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyramid PB 610 SX you will learn all the available features of the product, as well as information on its operation. The information that you get Pyramid PB 610 SX will certainly help you make a decision on the purchase.
If you already are a holder of Pyramid PB 610 SX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyramid PB 610 SX.
However, one of the most important roles played by the user manual is to help in solving problems with Pyramid PB 610 SX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyramid PB 610 SX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
