Instruction/ maintenance manual of the product PLMRKT12BK Pyle
Go to page of 14
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Automatic Memory Storing • Preset Equalization • USB Interface • Auxiliary Input Function • Remote Control PLMR18 www .
Installation ........................................3 T ake out screw befor e installation ......3 DIN Front-Mount (Method A) .............3 Installing the unit ............................3 Removing the unit...........................4 DIN Rear -Mount (Method B) .
3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place.
5 Dashboard or Console Side view showing Screw Holes marked T , N Factory Radio Mounting Bracket Screw Screw DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions.
WIRING CONNECTION 6 FRONT Lch SPEAKER GREEN GREEN/BLACK MEMORY BACK-UP (B+) MAIN UNIT IGNITION SWITCH (ACC+) POWER ANTENNA RED GROUND (B–) YELLOW BLACK BLUE RCA CABLE ANTENNA CONNECT OR (GREY) Rch R.
7 OPERA TION LOCA TION OF KEYS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 18 24 25.
8 OPERA TION FM1 FM2 FM3 AM • SWITHCHING ON/OFF THE UNIT Switch on the unit by pressing any button. When system is on, press button (1) to turn off the unit.
It supports the MP3/WMA file in the device, the operation please refer to the following instruction. • SELECTING TRACKS IN SINGLE STEP Press button (24) or button(2) to move to the previous track or the following track. T rack number shows on display .
OPERA TION 10 name are displayed (selected). The user can select the directory or file in the directory by volume knob.The selected file can be played by pressing BND/LOU/ENT button.
11 OPERA TION SUPPORTED MP3/WMA DECODING MODES The main unit supports MP3/WMA (Windows Media Audio) decoding modes as below . Supports Mode Stereo Stereo Standard MPEG1 Audio Layer 3 (44.1kHz) Windows Media Audio (44.1kHz) Bit Rate (kbps) 32, 48, 64, 96, 128, 192, 256, 320 64, 96, 128, 192 The USB solution can support: 1.
12 GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output P o wer : 4 x 40 W atts Current Drain : 15 Ampere (max.
TROUBLE SHOOTING 13 Before going thr ough the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on.
8800-0C3023-02.
An important point after buying a device Pyle PLMRKT12BK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyle PLMRKT12BK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyle PLMRKT12BK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyle PLMRKT12BK you will learn all the available features of the product, as well as information on its operation. The information that you get Pyle PLMRKT12BK will certainly help you make a decision on the purchase.
If you already are a holder of Pyle PLMRKT12BK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyle PLMRKT12BK.
However, one of the most important roles played by the user manual is to help in solving problems with Pyle PLMRKT12BK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyle PLMRKT12BK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
