Instruction/ maintenance manual of the product PLCD3MR Pyle
Go to page of 17
OWNER’S MANUAL Marine Audio System • PLL Synthesizer Ste • MP3 Player reo Radio • Digital Compact Disc Player • Automatic Memory Storing • Undetachable Panel • Preset Equalization • Electronic Shockpr oof (ESP) Function • Auxiliary Input Function • Remote Control PLCD3MR www .
Installation ..........................................3 T ake out screw befor e installation .......3 DIN Front-Mount (Method A) ...............3 Installing the unit ..............................3 Removing the unit ............................4 DIN Rear -Mount (Method B) .
3 Notes: • Choose the mounting location where the unit will not interfere with the normal function of the driver . • Before installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the system works properly .
5. Mount the sleeve by inserting it into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place.
5 Dashboard or Console Side view showing Screw Holes marked T , N Factory Radio Mounting Bracket Screw Screw DIN REAR-MOUNT (Method B) If your vehicle is a Nissan or Toyota, follow these mounting instructions.
WIRING CONNECTION 6 FRONT Lch SPEAKER GREEN GREEN/BLACK MEMORY BACK-UP (B+) MAIN UNIT IGNITION SWITCH (ACC+) POWER ANTENNA RED GROUND (B–) YELLOW BLACK BLUE RCA CABLE ANTENNA CONNECTOR (GREY) Rch RE.
7 OPERA TION LOCA TION OF KEYS 1 2 3 4 5 6 7 8 9 10 13 12 11 14 15 16 17 18 19 20 21 22 23 24 25 26 1. POWER 2. SEL 3. DISC SLOT 4. DISPLA Y 5. EQ 6. IR REMOTE 7. EJECT 8. AUX IN 9. 1>> 10. 1>> 11. BAND ( LOU) 12. MOD 13. M6 14. M5 15. SHF 16.
GENERAL OPERA TION • SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except EJECT button (7)). When system is on, press POWER button (1) to turn off the unit. • SOUND ADJUSTMENT Press SEL button (2) shortly to select the desired adjustment mode.
9 OPERA TION RADIO OPERA TION • SWITCHING TO RADIO MODE Press MOD button (12) momentarily to select radio mode, the radio mode appears in the display together with the memory band and frequency . • SELECTING THE FREQUENCY BAND In radio mode, press BND/LOU (ENT) button (11) momentarily to select the desired band.
10 OPERA TION CD OPERA TION • SWITCHING TO CD MODE If ther e is no CD inserted in the driver: Gently insert the CD with the printed side up into the CD compartment until you feel some resistance. The CD is drawn into the driver automatically . CD playback begins.
11 OPERA TION • SELECTING TRACKS BY AS/PS/D- AUD BUTTON AS/PS (D-AUD) button is assigned as Digital Audio Mode selection button in MP3 operation. When pressed, it selects each mode of Digital Audio.
12 OPERA TION • DISPLA Y INFORMA TION Press DSP button (20) to show following information, such as the clock, ID3 T AG (if available: song title, directory name, artist name and other contents…) and other information.
13 OPERA TION Recordable Rewritable DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, star , heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. 2. Do not stick paper or tape etc.
REMOTE CONTROL HANDSET FUNCTION KEYS & CONTROL 1. PWR Power ON/OFF Button 2. DSP Display Button 3. SEL Sound Mode Select Button 4. VOL V olume Up Button 5. VOL V olume Down Button 6. BND (LOU) Band Select Button (When pressed momentarily) Loudness Button (When held down) 7.
15 GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : 10 dB - Treble (at 10 KHz) : 10 dB Maximum Output Power : 4 x 40 W atts Current Drain : 15 Ampere (max.
Before going thr ough the checklist, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on.
8800-0C3021-.
An important point after buying a device Pyle PLCD3MR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyle PLCD3MR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyle PLCD3MR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyle PLCD3MR you will learn all the available features of the product, as well as information on its operation. The information that you get Pyle PLCD3MR will certainly help you make a decision on the purchase.
If you already are a holder of Pyle PLCD3MR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyle PLCD3MR.
However, one of the most important roles played by the user manual is to help in solving problems with Pyle PLCD3MR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyle PLCD3MR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
