Instruction/ maintenance manual of the product PAH1 Pyle
Go to page of 8
(E lt - Art No . : PYLE_SPORTS · PAH1 PROFESSIONAL DIGITAL ALTIMETER ----ALL·in-0NE • •.
FEATURES A lti meter - Al t i tude Range (- 500 to 9000 meter 1 -1 600 to 29500 feet), Resolution of 1 meter 1 1 feet - Max.' M i n . memory for Alt i tude - Al titude Hi story and Graphica l display of the l ast 12 hour al titude read i ngs - Alt i tude Al arm - Stop Watch up to 9 hr 59 m i n 59.
Icons: tBlI - Altimeter mode TOT - Altitude Tota l Gain/loss Ilr:tm - Barometer mode IEIORI' - Memory mode e )) - Altimeter Alert ON MAX - Maximum memory D1 ... - Ascending .. - M i ni mum memory • - Descend i ng Elm mb - Barometer Graphic :: } Barometer Un" Display ft } Altimeter Unit m D2 J - : - : - : - : - : - .
WAKE UP AND SET YOUR COMPUTER - Press button A until all segment on or re-insta ll the battery A lt imeter Unit (Meterl Feet) Selection L Rig ht after all segment on, the Om" digit will start to flicker. 2. T o select m ( Meter) or ft ( Feet), press button B and then press button C to confirm.
THE BAROMETER • Press Button D to enter the Barometer Mode . Barometer and Weather States Adjustment 1. T o adjust the barometer and weather states. weather forecast funct i on can have a good Initialization. 2. Press Button D to Norma l Mode and then hold Button D again.
THE BAROMETER Maximum and Minimum 1 . Press Button 0 to enter the Memory mode. 2. The memory of max i mum and minimum barometer wi ll be scro ll ed on the display automatica l ly. 3. To reset the memory, press and ho ld Button B . At the same t i me, the memory for the hygrometer and the thermometer wi ll be reset al so.
Maximum and Minimum 1. Press Button A to enter the Memory mode . 2. T he memory of maximum and minimum a lti tude w ill be scro ll ed on the d i sp l ay automat i cally. 3. To reset the memory. press and hold Button B. At the same time. the memory for the hygrometer and the thermometer wi ll be r eset a l so .
The Al timeter Alarm 1. Press Button A to enter the Altimeter Al arm Mode. 2. To set the target a l t i tude for the A l arm , press and ho ld Button A unti l the digit starts to flicker. 3 . Press Button B to set the d i gits and then press Button A to conflrm .
An important point after buying a device Pyle PAH1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyle PAH1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyle PAH1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyle PAH1 you will learn all the available features of the product, as well as information on its operation. The information that you get Pyle PAH1 will certainly help you make a decision on the purchase.
If you already are a holder of Pyle PAH1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyle PAH1.
However, one of the most important roles played by the user manual is to help in solving problems with Pyle PAH1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyle PAH1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
