Instruction/ maintenance manual of the product PACT1 Pyle
Go to page of 8
(E It _ Art NO .: P YLE_SPORTS-PACT1 PROFESSIONAL PYL'. ~ DIGITAL ALTIMETER ALL - in - ONE.
FEATURES Altimeter - Altitude Range (-500 to 9000 meter / -1600 to 29500 feet), Resolution of 1 meter / 1 feet - Max. / Min. memory for Altitude - Altitude History and Graphical d i sp l ay of the last 12 hour altitude readings - Altitude Alarm - Stop Watch up to 9 hr 59 min 59 .
Dl D2 D3 D4 DS Icons : tBiJ - Altim<>ter mode TOT - Altitude TOUlI Gain/Loss ~ • Barometer mode IEIIORY - MOfnory modo . )) - Altim<>ter AlOft ON MAX - Max i mum memory • - Asconding -.
WAKE UP AND SET YOUR COMPUTER • Press button A until all segment on or re- I nstall the battery Altimeter Unit ( Meter/ Feet) Selection 1. Right after all segment on , the O m " digit will start to flicker . 2. To select m ( Meter) or ft ( Feet), press button B and then press button C to confirm.
THE BAROMETER • Press Button 0 to enter the Barometer Mode. Barometer and Weather States Adjustment 1. To adjust the barometer and weather states, weather forecast funct i on can have a good initializat i on. 2. Press Button 0 to Norma l Mode and then hold Button 0 again, the barometer digits w ill start to fl i cker.
THE BAROMETER Maximum and Minimum 1. Press Button 0 to enter the Memory mode . 2. T h e memory of maximum and minimum barometer will be scrolled on the display automatica ll y . 3. To reset the memory. press and hold Button B . At the same t i me. the memory for the hygrom e ter and the thermometer will be reset a l so.
Maximum and Minimum 1. Press Button A to enter the Memory mode . 2. The memory of maxJmum and minimum altitude will be scrolled on the display automatically. 3. To reset the memory. press and hold Button B. At the same time. the memory for the hygrometer and the thermometer will be r eset also.
The Altimeter Alarm 1. Press Button A to enter the Altimeter A l arm Mode. 2. T o set the target a lt itude for the Alarm. press and h old Button A unti l the digit starts to flicker. 3 . Press Button B to set the d i gits and then press Button A to confirm.
An important point after buying a device Pyle PACT1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyle PACT1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyle PACT1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyle PACT1 you will learn all the available features of the product, as well as information on its operation. The information that you get Pyle PACT1 will certainly help you make a decision on the purchase.
If you already are a holder of Pyle PACT1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyle PACT1.
However, one of the most important roles played by the user manual is to help in solving problems with Pyle PACT1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyle PACT1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
