Instruction/ maintenance manual of the product PYLE PylePro PDWM2200 PYLE Audio
Go to page of 5
USER'S MANUAL TWO CHANNELS VHF WIRELESS MICROPHONE PDWM2700 TRANSMITTER.
1. Avoid exposure of the system to rain or moisture. 2. No user-serviceable parts inside the system. Refer all servicing to a qualified technician only.
Please read and check the following points before asking for service. The wireless microphone fails fo work: --Check the microphone battery by switching the microphone ON. If power LED indicator lights red, replace the battery. --Check the POWER indicator on the receiver unit is ON.
BEL T P ACK TRANSMITTER MIC IN A. Overall system 1. Oscillation mode: 2. Carrier Frequency Range 3. Frequency Stability: 4. Max Deviation: 5. Dynamic Range: 6. S/N Ratio: 7. T . H. D: 8. Frequency Response 9. Operating Range: B. Receiver 1. Sensitivity: 2.
To connect the wireless microphone to your amplifier system: Refer to the installation diagram below. Using the supplied 6.35mm to 6.35mm lead, connect from the AF OUT jack of the receiver to the MIC INPUT socket on your amplifier. Plug one end of the mains power adapter into a suitable mains socket.
An important point after buying a device PYLE Audio PYLE PylePro PDWM2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PYLE PylePro PDWM2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PYLE PylePro PDWM2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PYLE PylePro PDWM2200 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PYLE PylePro PDWM2200 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PYLE PylePro PDWM2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PYLE PylePro PDWM2200.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PYLE PylePro PDWM2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PYLE PylePro PDWM2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
