Instruction/ maintenance manual of the product PLVWR70IR PYLE Audio
Go to page of 12
OWNER’S MANUAL FLIP DOWN TFT MONITOR PL VWR70IR.
2 INST ALLA TION Desk-top Installation 1. Determine the mounting location and drill four mounting holes. 2. Attach the bracket to the holes with the tapping screws (M4x10). 3. Let the two levers aim at the fixing holes on the bottom of the base to fix the display unit.
3 INST ALLA TION Ceiling-on Installation 1. Determine the mounting location and drill four mounting holes (see Fig.2). 2. Attach the bracket to the holes with the tapping screws (M4x10). 3. Let the two levers aim at the fixing holes to fix the display unit.
REPLACING THE CAR DOME LAMP Follow the directions show below for a new lamp changing. 1. Position light switch to “ ”. 2. Push back the lamp cover and open it. (Refer to the following figure) 3. Remove and discard the old lamp. 4. Install a new bulb.
5 CONTROL & FUNCTION KEYS 7 ” INCH TFT COLOR MONITOR 11 12 11 12 8 9 7 3 4 5 6 2 1 10 14 15 16 18 17 20 3 13 21.
6 MONITOR 1. & 2. (POWER) and POWER INDICA TOR LIGHT When the unit is provided DC 12V power , press POWER button (1) to turn on the unit. And then the power indicator light (2) will be illuminated red. Pr ess it again to turn it off. 3. CAR DOME LAMP The two car dome lamps (3) will be on in some needed situations.
13. PUSH (Monitor Release Button) Opening the Monitor Press the PUSH button (13) to eject the scr een display from the base at a little angle. Then you can easily turn the display upward or downward for good viewing.
OWNER’S MANUAL INFRARED HEADPHONE 8.
INFRARED HEADPHONE This infrared headphone is supplied with the main unit that has the infrar ed transmitting function. The user can put on the infrared headphone within pr oper range to hear the sound signal emitting from the infrar ed transmitting window of the main unit.
Removing the headphone batteries: T o remove the batteries, open the battery lid as described above and pull the battery out of the battery compartment by pushing the battery towards the spring until the plus pole is released and slides out.
Listening to a program When the main unit is working, it will automatically transmit the audio signal, and then you can use the infrared headphone to listen to a pr ogram. 1 . Set the volume control of the headphone to minimum then switch on the headphone.
88-T1342-05 www .pyleaudio.com.
An important point after buying a device PYLE Audio PLVWR70IR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLVWR70IR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLVWR70IR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLVWR70IR you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLVWR70IR will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLVWR70IR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLVWR70IR.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLVWR70IR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLVWR70IR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
