Instruction/ maintenance manual of the product PLVW1040R PYLE Audio
Go to page of 12
10.4" Overhead TFT -LCD Monitor PL VW1040R.
1 1. T able of Contents------------------------------------------------------ 1 2. W arning ------------------------------------------------------- -- ------- 1 3. Usage Notice ---------------------------------------------------------- 2 4. Package ---------------------------------------------------------------- 3 5.
Usage Notice Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your LCD monitor To avoid the damage of the LCD monitor and risk of electronic shock, do not permeate the LCD monitor with water or any drink.
3 Package This LCD monitor comes with all the items below . Check to make sure your unit complete. Contact your dealer immediately if anything is missing.
User Controls User Control Overview * Panel Control Start Y our Installation Wiring * Monitor connection 4.
Setting Up The Dome Lamps *Operating the dome Lamps 1. There are three function buttons for the Dome lamps operation: OFF , DOOR, and ON. (Refer to the following figure) A. OFF: T o turn off the lamps. B. DOOR: T o make the lamps turned on only when car doors are opened.
Installation your Monitor Take care to select a suitable fitting location and securing method for the monitor: *The unit should not distract or obstruct the driver. *The installation should not inhibit the entry to, or the exit from the vehicle. *The unit should not interfere with other vehicle components e,g (sliding sunroof).
Closing Monitor 1. Return the monitor to the central viewing position. (Refer to the following figure) 2. Push the monitor/TV back into the monitor base unit until the screen engages with the release button.
* OSD Menus in A/V Source MAIN MENU CUBS.1 = NTSC H. SYNC = +15.7K Hz V . SYNC = -60.0Hz BRIGHTNESS CONTRAST COLOR HUE SOURCE AUDIO RECALL EXIT CONTRAST COLOR BRIGHTNESS VOLUME * Quick Adjustment OSD Menus 1. By pressing the "SELECT" button, you may open the following OSD menus directly.
Function Descriptions Panel Control * Menu: Pop up the OSD menus. Press the "Menu" button again to exit the OSD menus. When in sub-menu, press "MENU" a g a i n t o g o b a c k t o t h e m a i n m e n u . * Select: 1. Switch among each function items in OSD menus.
Specifications Screen Size 10.4" diagonal Resolution 800 (H) x 600 (V) pixels Number of colors 262, 144 colors Pixel pitch & Format 0.264 (H) x 0.
Appendix Changing the New Battery in Remote Control 1. Push the cassette button to wards the right. (As shown # 1 in below figure) 2. Pull the all battery cassette away from the remote control.
An important point after buying a device PYLE Audio PLVW1040R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLVW1040R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLVW1040R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLVW1040R you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLVW1040R will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLVW1040R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLVW1040R.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLVW1040R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLVW1040R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
