Instruction/ maintenance manual of the product PLVS7HM PYLE Audio
Go to page of 16
7INCH WIDE TFT LCD MONIT OR.
Precautions Please read this manual completely and carefully prior to attempting to install your new car video equipment. Install correctly , your new equipment will provide you with year of enjoyable and safe usage. Installation of this equipment in any portion of a vehicle which impairs or distracts the driver is improper and dangerous.
Control and layout for the monitor 2 Notice: some functions ar e work by remote contr ol..
Control and layout for the r emote control 3 Notice: If the monitor does not have the function, the button would not be work. 2..
Function Press FUNCTION button< > on the remote or press manual button< > twice from the monitor to call out the function menu. FUNCTION PRESS UP < > OR DOWN < > BUTTON TO SELE.
Games Press < > to enter the games. Start --Menu Button < > Move --Down Button < > Roll --Up Button < > Exit --Mute Button < > Level --A V Button < > Pause --Menu B.
Installation Video 2 input (yellow) Ground (black) DC 12V power input (red) Remote Contr ol replacing batteries PULL OUT PUSH 1) Always use new batteries when replacing the old set. 2)Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
.
Step of install headrest housing 6 Setup work remove the headrest and set it in an uncluttered work area. T ake the appropriate precautions to ensure that it is not damaged during the installation.
Remove foam & obstructions Carefully peel back the material. Set the adjustable blade to one inch depth and cut around the edges of the hole, s taying 1/4 inch inside the edge. Pull up one corner of the foam and use the blade to cut underneath. Remove small section at a time, using the pull up and cut method for uniform depth.
.
Step of install sun-visor housing Measurements Push on the headrest with your fingers to make sure there are no obstructions that would hinder the installation. Use the paper template to mark the area to be cut. Setup work remove the visor and set it in an uncluttered work area.
Remove foam & obstructions Carefully peel back the material. Set the adjustable blade to one inch depth and cut around the edges of the hole, staying 1/4 inch inside the edge. Pull up one corner of the foam and use the blade to cut underneath. Remove small section at a time, using the pull up and cut method for uniform depth.
.
.
T echnical par ameters LCD Drive Method: TFT Active Matrix Display Size: 7 Inch Wide Screen (Diagonal) Aspect: 16:9 Display Format: 480 x RGB x 234 Number of Pixels: 1440 x 234 Video System Input: NTS.
An important point after buying a device PYLE Audio PLVS7HM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLVS7HM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLVS7HM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLVS7HM you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLVS7HM will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLVS7HM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLVS7HM.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLVS7HM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLVS7HM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
