Instruction/ maintenance manual of the product PLTVRDIN65 PYLE Audio
Go to page of 32
OWNER’S MANUAL Mobile V ideo System • V ertical Adjustable And Horizontal Rotatable Panel • 6.5 Inch Color TFT Monitor • DVD Player with Radio/TV T uner Box • Multi-subtitle Languages Functi.
2 FEA TURES Compatible with P AL DVD (V ideo CD) and NTSC DVD (Video CD) This player can play discs recor ded in either P AL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoders.
Safety Information ...................................................................................................... 4 Disc Notes ................................................................................................................... 5 Installation .
4 CAUTION: MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. BE SURE TO OPERA TE THE MOBILE DVD PLA YER CORRECTL Y AS INSTRUCTED.
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc (Single-sided disc only) VIDEO CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
6 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
6. Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables. 7. Slide the unit into the sleeve until it locks into place. 8. To further secure the unit, use the supplied metal strap to secure the back of the unit in place.
THE PLAYER FRONT VIEW 1. POWER 7. PICT 2. Remote sensor (on the front panel) 8. Adjust (-) 3. OPEN/CLOSE 9. Adjust (+) 4. (EJECT button) 10. Remote sensor (on the monitor panel) 5.
12. 13-PIN SOCKET 15. AUDIO/ VIDEO INPUT 13. RGB SYSTEM 16. DIGIT AL AUDIO 14. REMOTE SOCKET 17. DC 12V IN 9 THE PLAYER BACK VIEW 12 13 14 15 16 17.
THE RADIO BOX 10 1. 20-PIN SOCKET 2. TO MAIN UNIT 3. VIDEO OUTPUT 4. AUDIO OUTPUT 5. ANTENNA SOCKET 6. DIVERSITY ANTENNA ONE SIDE ANOTHER SIDE 2 3 1 4 5 6.
11 ELECTRICAL CONNECTION RADIO BOX 0.5A ACC (RED) GND (BLACK) CHOKE BOX DIGITAL AUDIO DVD UNIT REMOTE AUDIO/VIDEO INPUT DC 12V IN (BLACK) RGB SYSTEM ONE SIDE RADIO BOX FUSE FRONT RCA CABLE (BROWN) REA.
12 REMOTE CONTROL LOCA TION AND FUNCTION OF KEYS 6 1 3 7 11 35 4 10 36 5 12 13 14 2 8 9 16 15 17 20 18 19 24 34 22 28 23 25 21 32 26 27 30 31 29 33.
13 REMOTE CONTROL 1. POWER Press POWER to turn the unit ON or OFF . 2. EJECT Only in DVD (DVD, VCD, CD, MP3) mode, press to eject the disc. 3. OPEN/CLOSE Press to open/close the monitor . 4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language DVD disc.
14 REMOTE CONTROL Preparing the Remote Contr ol Inserting the Batteries 1. Open the battery compartment cover . 2. Insert the new batteries. Make sur e that the positive and negative terminals of the batteries are oriented as indicated.
15 OPERA TION BASIC OPERA TION T urnig the player on/off Press the POWER button on the fr ont panel or (POWER) button on the remote contr ol to turn the player on or off.
16 OPERA TION Remote Sensor There is a r emote sensor on the front panel. On the monitor , ther e is another remote sensor to r eceive remote contr ol signal.
17 OPERA TION DISC (DVD, VCD, CD, MP3) OPERA TION Switching to DVD mode Press MODE button on r emote control to select DVD mode. Stopping Play - Briefly pr ess the (STOP) button to stop the unit playback, when the (PLAY) button is pressed, normal playback will continue.
Disc Search (GOTO) FOR DVD Press GOTO button twice, the screen will display the following message: Y ou can select the item you want to watch through TIME setting by using numeric buttons and ENTER key .
On-Screen Display Function Press the DISPLA Y button during playback to display the contents of the current disc on the scr een. Example: DVD: (1) Press DISPLA Y for the first time: TITLE 01/03 CHAPTE.
20 between monaural and stereo sound. MONO LEFT MONO RIGHT STEREO MENU Function (For DVD Only) Press MENU button while the disc is playing and the disc root menu will be displayed. Y ou can navigate with the remote contr ol navigation keys and select a feature with the ENTER key .
21 Smart navigation in MP3 Play MP3 disc is playing as the format of FOLDER. For example: In stop mode, use / , / on the remote contr ol to select the item or folder (such as CD01, CD02...) and press ENTER button on the remote contr ol to confirm, then select the desired track (such as 001 PLUMT , 002 RZID.
22 location button for several seconds. The current listening station will be stored into the number button. - Retrieve a Pr eset Station Press any one of the RADIO PRESET buttons (1~6) on remote control to r etrieve a station which had been stored in the memory in advance the chosen number is shown on display .
23 appears on the display , you can press “ 1 “ button then press “ 6 ” button to select 16 channel. • Mute Press MUTE button on r emote control to cut down sound output. Press it again to r esume the previous volume mode. • Screen display Press TITLE (DSP) button on r emote control to display the curr ent status such as TVch.
24 SETUP INITIAL SETUP SETUP MENU --- MAIN P AGE 1. Press SETUP on the remote contr ol in the stop mode.(Press the button twice to ensure that the player is in under STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferred item by using the / buttons.
25 SETUP --- GENERAL P AGE --- PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution.
26 SETUP --- GENERAL P AGE --- SCR SA VER setup Select the SCR SA VER ON/OFF . SPEAKER SETUP --- SPEAKER SETUP P AGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.
27 SETUP PREFERENCES SETUP --- PREFERENCES P AGE --- TV type setup This player can play discs recor ded in either P AL or NTSC format. Select NTSC format, when the unit is connected to NTSC TV . Select P AL format, when the unit is connected to P AL TV .
28 SETUP --- PREFERENCES P AGE --- SUBTITLE language setup Select the preferr ed SUBTITLE language by using the cursor buttons. --- PREFERENCES P AGE --- DISC MENU language setup Select the preferr ed DISC MENU language by using the cursor buttons.
29 SETUP --- PREFERENCES P AGE --- DEF AUL TS Select reset to r evert to factory initial settings. --- PREFERENCES P AGE --- SMART NA V If selected WITH MENU mode, when playing an MP3 disc, the smart navigation menu will appear on the screen, then the user can select a track to play according to the menu hint.
TROUBLE SHOOTING If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty .
SPECIFICA TIONS GENERAL Power Supply Requirements : DC 12 V olts, Negative Ground Maximum Output Power : 4x40 watts Current Drain : 15 Ampere (max.) TV TV Sensitivity : 45dB µ V @CH25 in average RADIO FM Frequency Coverage : 87.
88-V1953-08 www .pyleaudio.com.
An important point after buying a device PYLE Audio PLTVRDIN65 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLTVRDIN65 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLTVRDIN65 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLTVRDIN65 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLTVRDIN65 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLTVRDIN65, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLTVRDIN65.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLTVRDIN65. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLTVRDIN65 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
