Instruction/ maintenance manual of the product PLTVR5 PYLE Audio
Go to page of 16
OWNER’S MANUAL COLOR LCD TV/RECEIVER WITH CD CHANGER CONTROL PL TVR5.
2 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system work pr operly .
3 MOUNTING THE TUNER UNIT 1. Bracket (A) 5. T apping Screw with W asher (M5 x 12) 2. Mounting Bolt (M5 x 5) 6. Spring W asher (M6) 3. Bracket (B) 7. Spring W asher (M5) 4. Hexagonal Bolt with W asher (M6 x 12) 8. Double Sided T ape INST ALL THE DISPLA Y UNIT Before install the display unit, please r emove its tail screw and cable parts.
1. Dashboard 2. Nut (M5) 3. Spring W asher 4. T apping Screw with W asher (M5 x 25) 5. Screw 6. Plain W asher 7. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. Removing the unit 1.
5 HOW TO OPEN AND CLOSE THE SCREEN DISPLA Y 1. Pr ess release button to draw out the scr een display . 2. T ur ning the display upward. 3. Adjusting the viewing angle.
4. T ur ning the display downward. Make sur e to return the display to centre position before drawing in. It cannot be draw in with its angles adjusted.
ELECTRICAL CONNECTION CAUTION: 1. If the TV contr ol grey cable is connected to car brake, when the car is running, you cannot switch into TV mode. 2. T o select CD changer ’ s sort: Before installing the unit, connect the CD changer with the unit corr ectly and turn on the power to make the unit work in CD changer state.
8 OPERA TION 30 4 28 29 26 24 27 25 31 23 15 4 11 1 9 2 10 5 16 13 14 32 12 20 21 19 18 17 22 3 6 8 7.
9 GENERAL OPERA TION • ON/OFF Switch on the unit by pressing POWER button (1). When system is on, pr ess it again to turn it off. • F ACEPLA TE RELEASE Press REL button (2) to draw out the faceplate, push the panel to draw in. When the faceplate is drawn out, turn the faceplate upward and adjust TV display .
10 • MONO/STEREO Press MON button (10) to select mono or ster eo mode. In radio operation, press the button to select mono or ster eo reception for radio station. Y ou can sometime improve reception of distant stations by select mono mode. • SETTING THE CLOCK Press DSP button (5) to change the display into clock display .
RADIO OPERA TION • SELECTING BAND Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six pr eset stations. • SELECTING STATION During radio mode, press button (13) to incr ease frequency or button (14) to decrease fr equency by one step of channel spacing.
12 CDC OPERA TION • SELECTING TRACK During CDC mode, press button (14) or button (13) shortly to move to the previous track or the next track. The track number shows on the display . • SELECTING CD Press D.UP button (17) to select next disc and D.
TV OPERA TION • SELECTING RECEIVING MODE Press TV/A V button (31) to select among TVch/A V1/AV2. • PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL In TV mode, press MENU button (23) to enter the main menu. And the menu includes three sub-menus: PICTURE MENU, TUNER MENU and SYSTEM MENU.
14 In the course of scanning, press SCAN button (26), “ SCAN OFF ” will also display on the screen and it stops on the TV channel just scanning. • SCREEN DISPLA Y Press DISP button (27), the scr een will display the current status such as TVch/A V1/AV2, the COLOR SYSTEM and the SOUND SYSTEM on the right-top corner .
15 REMOTE CONTROL HANDSET 2 11 8 9 10 16 5 6 7 14 13 15 12 17 4 3 1 CONTROL & FUNCTION KEYS 1. POWER = Press POWER to turn the unit ON or OFF 2. TV/A V = Switch between TV/A V1/AV2 3. 0 - 9 = Numeric buttons, press to select the corr esponding channel 4.
SPECIFICATION GENERAL P o wer Supply V oltage : DC 12 V olts, Negative Ground Maximum P o wer : 4 x 60 Watts Load Impedance : 10 Ampere (max.) Tone Controls - Bass (at 100 Hz) : + / – 10 dB - T reble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 5.
An important point after buying a device PYLE Audio PLTVR5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLTVR5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLTVR5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLTVR5 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLTVR5 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLTVR5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLTVR5.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLTVR5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLTVR5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
