Instruction/ maintenance manual of the product PLTDF25 PYLE Audio
Go to page of 23
DIGIT AL AUDIO OUT MUL TI-SUBTITLE LANGUAGES FUNCTION ELECTRONIC SHOCKPROOF (ESP) FUNCTION A/V INPUT FM MODULA TOR TV TUNER REMOTE CONTROL OWNER’S MANUAL.
Page CONTENTS 1 Contents 2 Safety Information 3 Installation 5 Electric Connection 6 Operation 8 Using The Remote Control 9 General Operation 10 CD/MP3 Operation 1 1 DVD/VCD Operation 15 Data Disc Pla.
Safety Information CAUTION: This mobile DVD player is a class 1 laser product. However this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed.
User’s Manual - page 3 Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right.
User’s Manual - page 4 The unit is designed for home-use and car-use. When installed on the car , please follow the installation instruction below . Notes: 1. First remove the two screws that lock the DVD mechanism, then attach the brackets on both sides of unit with screws (m4X5), last install the unit with screws (m5X25).
User’s Manual - page 5 ELECTRIC CONNECTION METHOD A Use the conversion cable to obtain DC 12V power supply input through the AC/DC ADAPTER or the cigarette lighter according to the illustrator as follows: METHOD B According to the illustrator below , install the unit in the car and obtain DC 12V power supply input.
User’s Manual - page 6 OPERA TION LOCA TION AND FUNCTION OF KEYS Front panel Remote Control.
User’s Manual - page 7 1. POWER 2. 3M O D E 4. 5. 6. EJECT 7. DISC Slot 8. A V IN 9. USB 10. SD/MMC 11 . I R 12. RESET 13. DISP 14. A-B 15. RPT 16. ZOOM 17. 18. ENTER Press it to turn the unit on/off. Pause playback a disc, press it again to resume playback.
User’s Manual - page 8 Preparing and Using The Remote Control * Before using the remote control, please take the transparent insulator strip off the bottom of remote control. -Do not subject the remote control to excessive shock. - D on o tp u ti nap o c k e t .
User’s Manual - page 9 Initial System Start-Up ESP Function Be sure to press the button ( 12) When using the unit for the first time, after all connections are completed correctly . 1. T urn of f the unit power . 2. Press with a ballpoint pen or similar pointed object.
User’s Manual - page 10 CD/MP3 Operation Playback 1. 2. Insert a disc with the label side facing up. The disc will be drawn into the player automatically . The information for the current disc will be shown on the screen . For CD: 3F o r M P 3 .: 1).
User’s Manual - page 1 1 Note: REP 1: REP DIR: REP ALL: REP OFF: - Paragraph Repeat Play: A-B Playing In Random Sequence RDM Only a track (file) is played repeatedly . Only tracks (files) in a folder are repeatedly playing. An entire disc is played repeatedly .
User’s Manual - page 12 Fast-Forward / Fast-Reverse 1. Fast-forward FORW ARD 2X 4X 8X 20X 2. Fast-Reverse 2X 4X 8X 20X Finding the Beginning of Chapters or T racks (Files) Repeat play: 1) RPT Press button (28) during playback.
2. W aiting for a moment for the player locate the track. Playback starts from the selected chapter or track. * Press button (33) to switch the random mode on/off. If the random mode is on, tracks (files) on the disc will be played in a random order .
User’s Manual - page 14 Press the SUB-T button (23) during playback. The following information will be shown on the screen. Each time you press the button, the subtitle cycles between the different languages recorded on the disc. - Not all discs will allow changing the subtitle during playback.
User’s Manual - page 15 Use , cursor button to select the item that you want to program. 1) The item you selected will become highlighted. 2) Input the track number that you want to program by numeric buttons (0~9) on the remote control.
User’s Manual - page 16 Memory Card Play Operation GOTO Note: USB Device Operation Using the USB device: GOTO Note: This disc player offers you a memory card slot (10). Using the SD/MMC card: When you insert a SD/MMC card into the Memory card slot (10), the DVD player will read the SD/MMC card automatically .
2) In DVD mode, press MENU button continually , you can adjust the FM frequency between 87.7-88.9MHz (adjustment unit is 0.2 MHz/step). 3) T o tune radio to the corresponding frequency , you can listen to the audio of the DVD player by radio equipment.
About MP3 W h a ti sM P 3 ? Corresponding file systems MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression standard prescribed by the ISO, the International standardization organization and MPEG which is a joint activity institution of the IEC.
Y ou can either choose AUTO SELECT , which will sense the type of monitor attached to the output and select NTSC or P AL as needed. If you know the type of monitor , you should choose the type in this menu rather than letting AUTO SELECT do it for you.
3) Press or button to select “ ” then press button. The restriction level parental level input display appears 4) Press button to select the restriction level (1 to 8), and then press button. 5) When the setting is complete, press button to return to normal mode.
1. Supply voltage: 2. Signal system: 3. Discs played: 4. Audio output level: Power Supply Requirements 12V DC (1 1~15V), test voltage 14.4V , negative ground Current consumption: Less than 2 A Compositive video 1.0 + - 0.2Vp-p 75 (1) DVD-VIDEO disc] (2)Compact disc(CD-DA/CD-R/CD- RW/MP3) (3) VIDEO CD 10K Ω Ω( 2 c h2 .
No Sound Check the audio connections. The Player Does Not Respond T o the Remote Control Distorted or B/W Picture No Audio at Digital Output Buttons Do Not Work Aim the remote control directly at the sensor on the front of the player . Remove any obstacles which may interfere with the signal path.
An important point after buying a device PYLE Audio PLTDF25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLTDF25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLTDF25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLTDF25 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLTDF25 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLTDF25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLTDF25.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLTDF25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLTDF25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
