Instruction/ maintenance manual of the product PLD175TBT PYLE Audio
Go to page of 27
Analogue TV Receiver Flip Down Detachable Front Panel Anti-Shock Mechanism A/V Output & A/V Input CAR VIDEO SYSTEM Sub-woofer Function AM/FM 2 Band Radio P AL/NTSC Color System Instruction Manual PLD175TBT Bluetooth Function /CD-RW Compatible DVD/VCD/MP4/MP3/CD/CD-R WWW .
.
CONTENTS T rouble Shooting 22 Bluetooth Function Tipwizard 20 19 Digital Setup 19 Audio Setup 18 Language Setup System Setup 17 17 Setup 16 Attachment A V In Operation 16 15 Operation of USB device Da.
CAUTION: Automotive DVD player is a class 1 laser product. However this car DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed.
2 Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the below .
3 1 2 3 53 182 (Fig.1) 1. Dashboard 2. Hoder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and ben them inwards to secure the holder in place. 3. Screw (Fig.2) 1 6 2 3 7 4 5 1.
4 Wiring Diagram ANTENNA Socket Y ellow to Video output 1 Y ellow to Video output 2 Red to Front Rch RCA output White to Front Lch output RCA Green to SUB-Woofer output Red to Rear Rch RCA output Whit.
Operation Location and Function of Keys When you press button (3) and the front panel flip down : 25 24 23 22 21 20 6 13 18 9 19 15 11 8 16 17 7 3 2 1 43 12 26 5 4 41 14 43 T o connect with mobile aud.
When using the Remote Control * Before you using the remote control, please take the transparent insulator slice off the bottom of remote control. * Point the remote control at the remote sensor (9) within 2 meters. * It may not be possible to operate the remote control if the remote control sensor is exposed to direct sunlight.
Initial System Start-Up Be sure to press the button (1) when using the unit for the first time, after all connections are completed correctly . 1. T urn off the unit power .
DISC/USB/SD A V IN TUNER Sub-woofer: ON/OFF 2. Rotate the button to choose the desired item. Press button (29) to choose the desired item. Display/Adjust T ime 1. Displaying time: Press button (7) to show current information and time on the LCD, and it returns to original status after 5 seconds.
- Error symbol on the display . Note: If press button(1), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the disc socket. RESET Selecting The Frequency Band Press button (14) shortly to select the desired band.
Selecting T racks In Single Step Press button (18) or button (19) to skip to the previous track or the next track. T rack number shows on display . Press and Hold button (18) or button (19) to fast reverse or fast forward. It return to normal mode when you release the button.
DVD/VCD Operation Playback with PBC Menu Press button to toggle between PBC ON and PBC OFF . In PBC ON mode, REPEA T , RANDOM, A- B, PROGRAM and GOTO functions are void.
T o revert to normal playback, press button again. A-B REPEA T CANCEL Finding The Beginning of Chapters or tracks (Files) Use this function to easily move to the beginning of the chapters or tracks (files) on the disc.
GOTO Function Press button, the screen will display the following message: FOR DVD: Use the number keys (32) to input the desired T itle, Chapter or T ime, and then press button (30) to confirm. FOR VCD: Use the number keys (32) to input the T rack and T ime then press button (30) to confirm.
ANGLE 1 The angle switches between the angles recorded on the disc each time the button is pressed. Notes: Some time may be required for the angle to change. Depending on the disc, the angle may switch in one of two ways. 1 Seamless: The angle switches smoothly .
When you insert a data disc including audio (MP3), movie (MPEG), picture (JPG) files into the disc slot, the following media play window will be shown on the screen: Explain as follows: 1. Press button to move between w o r ka r e a A ,w o r ka r e aBa n dw o r ka r e a C.
1. About Parental Control DVD discs have a parental level assigned to the disc. The range of parental controls is f r o m1t o8 . The player can be set in a similar way .
In DVD mode, when the disc is playing or in stop mode, press button (31) to enter setup menu. 1. When the cursor is on the topside, use buttons to move between the different pages. 2. Press button to move the cursor to the setup page below and then you can use buttons to move between the different setup options.
16:9 Select this when connected to a wide screen TV . Password Change the password locking or unlocking I he default is 0000 . SETTING the Rating Level (Parental Control) Use this function to restrict the viewing of movies to children of appropriate age levels only .
menu, you will see the DIGIT AL SETUP page: 1). OP MODE: Change among LINE OUT/RF REMOD. - LINE OUT : LINE OUT mode, with digital dialog normalization. - RF REMOD: RF REMODULA TION mode, with heavy compression and digital dialog normalization. 2). DYNAMIC RANGE: Change among FULL, 6/8, 4/8, 2/8, OFF .
6. BT MENU BT MENU PRES 06: RECV 06: DIAL 06: MISS 06: AUTO ON/OFF: ZOOM ZOOM c At connect status, press the button (31) on the remote control to enter bluetooth menu. The structure of the blue tooth menu as follows: Preset number list. Received call list.
7. V oice dialing function 8. A2DP Function A2DP MODE Remark: If your mobile phone support voice dialing function, you can dial a phone number by voice dialing.
If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Do not try to repair the player by yourself, as this will invalidate the warranty . Only qualified service personnel can remove the cover or service this player .
1. GENERAL Power Supply Requirements DC 12 V olts, Negative Ground Chassis Dimensions 178(W)x160(D)x 50(H) T one Controls - Bass (at 100 Hz) 10 dB - T reble (at 10 KHz) 10 dB Maximum Output Power 4x60 watts Current Drain 15 Ampere (max.
24.
An important point after buying a device PYLE Audio PLD175TBT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLD175TBT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLD175TBT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLD175TBT you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLD175TBT will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLD175TBT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLD175TBT.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLD175TBT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLD175TBT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
