Instruction/ maintenance manual of the product PLCD69MP PYLE Audio
Go to page of 16
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • Automatically Memory Storing • Hiding Panel • Preset Equalization • Auxiliary Input Func.
2 Installation ..................................................................................................... 3 DIN Front-Mount (Method A) .................................................................................. 3 Installing the unit .
3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
4 INST ALLA TION Removing the unit 1. Frame 2. Release Frame Key Insert the release frame key into the groove at the right side of the frame, then prize out to remove the frame.
5 3. Then insert a disc in the disc slot, the panel will automatically turn up to State 2. Press (eject) button again, the panel will turn down to eject the disc. If you don ’ t insert a disc in again, the panel will automatically turn up about 10 seconds.
6 WIRING CONNECTION GREEN GREEN/BLACK GREY GREY/BLACK VIOLET VIOLET/BLACK MAIN UNIT WHITE WHITE/BLACK FRONT Lch SPEAKER REAR Lch SPEAKER FRONT Rch SPEAKER REAR Rch SPEAKER Rch RED Lch WHITE (GREY) RCA.
7 GENERAL OPERA TION • ON/OFF When the hiding panel turns up (in State 2), press button (9) to turn on the unit. When system is on, press button (9) to turn off the unit. • SOUND ADJUSTMENT Press SEL button (10) to select the desired adjustment mode.
• SET THE CLOCK Press the DSP button (15), and the clock is shown on the display . Then hold down the button until the clock flashes. Then press the MANU/SKIP button (17) to change hours or MANU/SKIP button (16) to change minutes. • SELECT MODE Press MOD button (6) to choose desired listening mode.
9 • AUTOMA TICALL Y MEMOR Y STORING & PROGRAM SCANNING - Automatic Memory Storing Press AMS button (18) for several seconds, the radio searches fr om the current fr equency and checks the signal strength level until one cycle search is finished.
10 CD OPERA TION • CD OPEN/CLOSE/EJECT When the front panel is in State 2 and the unit is on, press (eject) button (4), the panel will change into State 3 and display the disc slot (5). Then insert a disc into the slot, the panel will automatically turn up.
OPERA TION REMOTE CONTROL HANDSET FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP (0) = Display Button (_, -, +, 0) 3. SEL = Select Button (Character Shift Right) 4. VOL = V olume Up Button [Charater Select (A, B~8,9,0)] 5. VOL = V olume Down Button [Charater Select (A, B~8,9,0)] 6.
OPERA TION MP3 OPERA TION (FOR WITH MP3 OPERA TION VERSION ONL Y) During MP3 operation, these buttons serve the followings: 1. “ Searching track dir ectly ” in Digital Audio CD. 2. “ Searching File Name ” in Digital Audio CD. 3. “ Searching File or dir ectory ” by file directory structur e in Digital Audio CD.
13 OPERA TION Note: A. Notes on discs: • Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. • Do not stick paper or tape etc., onto the label side or the recor ding side of any discs, as it may cause a malfunction.
GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ower : 4 x 60 Watts Current Drain : 15 Ampere (max.
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on.
88-C1731-23 www .pyleaudio.com.
An important point after buying a device PYLE Audio PLCD69MP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLCD69MP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLCD69MP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLCD69MP you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLCD69MP will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLCD69MP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLCD69MP.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLCD69MP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLCD69MP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
