Instruction/ maintenance manual of the product PLCD19XMR PYLE Audio
Go to page of 18
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • XM Ready Function • Automatic Memory Storing • Slide Down Detachable Panel • Direct T rack Access • Program CD T racks • CD Changer Control • Auxiliary Input Function • Wired Commander Contr ol www .
2 CONTENTS Installation .....................................................................................................3 DIN Front-Mount....................................................................................................3 Installing the unit .
Notes: • The unit can be installed on the vehicle or the ships. • Choose the mounting location wher e the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
4 INST ALLA TION (Fig. 2) 1 2 6 5 4 3 7 OPEN button Front Panel 1 2 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5x25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle.
5 Bottom Button Bottom Button Protective Case Front Panel USING THE DET ACHABLE FRONT P ANEL T o Detach the Front Panel 1. Press the OPEN button, the fr ont panel will slide down. 2. When the front panel slides down, press the bottom button of the fr ont panel upward and pull it out fr om the panel bracket.
6 WIRING CONNECTION ANTENNA CONNECTOR (BLACK) CD CHANGER CONNECTOR SOCKET (BLACK) FUSE WIRING REMOTE CONNECTOR SOCKET AUDIO R IN (RED) AUDIO L IN (WHITE) XM RECEIVER CONNECTOR SOCKET (BLACK) RED RCH W.
OPERA TION 7 CONTROL & FUNCTIONS KEYS This unit is a marine rated wired r emote control made using a modified controller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver . The body , buttons, controls and display need to be UV and water -resistant.
OPERA TION 8 4 MODE SELECTION button Press the MODE button (4) to step sequentially thr ough the following sources: e.g. radio mode to CD mode to CDC mode to AUX in mode. 5 BAND SELECTION button Press the BAND button (5) to step sequentially thr ough the following bands: FM1, FM2, FM3, AM1, AM2.
INST ALLA TION 9 3. Align the screw holes on the holder with the screw holes on the base and the screw holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote contr ol to the holder .
10 OPERA TION 14 19 8 13 12 11 9 1 22 23 20 21 24 6 16 17 10 2 7 15 18 3 4 5 25 LOCA TION OF KEYS 1. DISP 2. AS/PS/ELAPSE 3. / /MUTE 4. EJ 5. DISC SLOT 6. MODE 7. OPEN 8. LIQUIID CRYST AL DISPLA Y 9. PWR 10. SEL/MENU 11. VOL 12. VOL 13. SHIFT/SCAN/XM-MOD 14.
GENERAL OPERA TION SWITHCHING ON/OFF THE UNIT Pressing PWR button (9) to switch on or turn off the unit. When system power turns on, the system is returned to previous mode. F ACEPLA TE RELEASE Press OPEN button (7) to slide down the removable faceplate.
“FREQ/CLOCK/NO PRI priority” mode. And then you can press VOL button (11) or VOL button (12) to select frequency priority or clock priority or no priority .
13 OPERA TION RADIO OPERA TION SWITCHING TO RADIO MODE Pres s MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency . SELECTING THE FREQUENCY BAND At radio mode, press BAND/ENTER button (18) shortly to select the desired band.
14 OPERA TION Normal Category mode Direct T une STORING PRESET CHANNELS The preset buttons can be used to stor e channels for convenient access to your favorite channels. - Programming channels 1. Select the desired channel you want to store in memory .
15 OPERA TION you select a track number that doesn’t belong to the current disc, “NO TR” will appear on the display . REPEA TING THE SAME TRACK Hold press RPT button (21) for several seconds to continuously repeat the same track. Hold press it again to stop r epeat.
OPERA TION 16 DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recor ding side of any discs, as it may cause a malfunction.
17 GENERAL P ow er Supply Requir ements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T r eble (at 10 KHz) : ± 10 dB Maximum Output P o wer : 4 x 50 W atts Current Drain : 15 Ampere (max.
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on.
An important point after buying a device PYLE Audio PLCD19XMR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLCD19XMR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLCD19XMR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLCD19XMR you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLCD19XMR will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLCD19XMR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLCD19XMR.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLCD19XMR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLCD19XMR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
