Instruction/ maintenance manual of the product PLCD10CH PYLE Audio
Go to page of 12
OPERA TING INSTRUCTIONS Compact Disc Auto Changer Disc Magazine Compact Disc Changer System Disc Auto Changer Open DIGIT AL AUDIO COMP ACT DISC CHANGER 10 PLCD10CH.
2 CONTENTS HINTS FOR CORRECT AND SAFE OPERA TION 2 HOW TO USE THE MAGAZINE 3 PRECAUTIONS FOR HANDLING DISCS 4 INST ALLA TION P ARTS 5 WIRING 5 RESET FUNCTION 5 BEFORE INST ALLING THE UNIT 6 • T rans.
3 HOW TO USE THE MAGAZINE Loading a disc 1. Pick the tab on the magazine ’ s disc tray and pull out only of the trays. 2. Place the disc on the tray with its play surface facing down (label surface facing up). • Each tray can accommodate only one disc.
4 PRECAUTIONS FOR HANDLING DISCS With new discs The symptoms described below sometimes occur when new discs are used: • The disc is not played even when it is loaded. • Operation changes to the next disc before the first disc has a chance to be played.
5 INST ALLA TION P ARTS WIRING Connect this cable to the terminal of the CD player . RESET FUNCTION The reset button must be activated with either a ball point pen or thin metal object. It is to be activated for the following reason: • Initial installation of the unit when all wiring is completed.
6 BEFORE INST ALLING THE UNIT T ransport Lock Scr ews The mechanism in the CD changer is “ locked ” into place during shipment by the transport screws. Be sure to r emove the screws prior to installation. Caution After removing the transport lock scr ews, place the supplied seals over the screw holes.
7 Position of the built-in anti-vibration board This unit can be installed horizontally (suspended), vertically , and at a 45 ° angle. Once the installation position has been decided, it ’ s necessary to set the position of the built-in anti-vibration board inside the unit.
8 INST ALLA TION Procedur e for Installation on Carpet (Horizontal Position) 1 2 3 4 5 • Confirm that the built-in anti-vibration boards on both the left and right sides are set to the horizontal installation position “ 0 ” . • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5).
9 INST ALLA TION Procedur e for Installation on Carpet (V ertical Position) 1 2 3 4 5 • Set that the built-in anti-vibration boards on both the left and right sides are set to the vertical installation position “ 90 ” . • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5).
10 INST ALLA TION Procedur e for Installation on Carpet (at a 45 ° angle) 1 2 3 4 5 • Set the built-in anti-vibration boards on both the left and right sides to the 45 ° installation position “ 45 ° ” . • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5).
11 INST ALLA TION Procedur e for Installation (Suspended Position) 1 2 3 • Confirm that the built-in anti-vibration boards on both the left and right sides are set to the horizontal installation position “ 0 ” . • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5).
88-D0040-11 12 HANDLING THE DISCS Dirt, dust, scratches and warpage cause sound skips during playback and a deterioration of sound quality . How to take care of your disc: 1. Use compact discs that have the mark shown on the right. 2. Fingerprints and dust should be carefully wiped of f the disc ’ s signal surface (glossy side) with a soft cloth.
An important point after buying a device PYLE Audio PLCD10CH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLCD10CH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLCD10CH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLCD10CH you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLCD10CH will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLCD10CH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLCD10CH.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLCD10CH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLCD10CH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
