Instruction/ maintenance manual of the product PINV5 PYLE Audio
Go to page of 9
www .pyleaudio.com PINV4 PINV5 PINV6 PINV4 600W A TT PINV5 800W A TT PINV6 1000W A TT OWNER’S MANUAL POWER INVER TER.
INTRODUCTION Thank you for purchasing the PYLE View DC to AC Power Inverter . The PINV4/PINV5/PINV6 will deliver an efficient power to a wide variety of household AC products or electronic appliance r.
FEA TURES PINV4 / PINV5 / PINV6 1. AC OUTLET 2. ON/OFF SWITCH 3. POWER ON LED 4. PROTECTION LED 5. BINDING POST TERMINAL 2.
OPERA TION - CAUTION : DO NOT USE THIS INVERTER WITH THE FOLLOWING: • Small battery operated appliances such as RECHARGEABLE FLASHLIGHTS, SOME RECHARGEABLE SHA VERS and NIGHT LIGHTS that are plugged directly into as RECEPT ACLE TO RECHARGE • BA TTERY CHARGERS used with certain power tool battery packs.
-The LED indicators A. GREEN : It indicates the inverter is power on, the cooling fan (PINV4/ PINV5 / PINV6) is also activated, and AC power will be delivered to the AC outlet. B. RED : It indicates the inverter shutdown caused by low voltage, overload, or excessive temperature.
BA TTER Y OPERA TING TIME The vehicle batteries are not intended for constant deep discharge, they are designed to provide brief periods of very high current needed for engine starting. It is strongly recommended to start the vehicle every hour or two to recharge battery before its capacity drops too low .
TROUBLE SHOOTING SYMPTOM A: NO AC POWER OUTPUT , THE RED LED LIGHTS. SYMPTOM B: NO AC POWER OUTPUT , NO LED LIGHTS ARE ON. 6 POSSIBLE CAUSES SUGGESTION The connected AC products are rated at more than 600 W atts (PINV4) , 800 W atts (PINV5) or 1000 W atts (PINV6), the overload shutdown occurred.
SYMPTOM C: THE LOW OUTPUT OF INVERTER IS MEASURED 7 POSSIBLE CAUSES SUGGESTION Battery voltage is too low below 10V DC Recharge battery The inverter is overload Reduce load to 600 W atts (PINV4) , 800 W atts (PINV5) and 1000 W atts (PINV6) maximum to maintain regulation.
SPECIFICA TIONS AC output voltage (nominal) ............................................................................1 15 V olts AC DC input voltage range. ...................................................................................10-15 V olts DC Maximum Continuous AC output power .
An important point after buying a device PYLE Audio PINV5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PINV5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PINV5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PINV5 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PINV5 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PINV5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PINV5.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PINV5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PINV5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
