Instruction/ maintenance manual of the product car security system PYLE Audio
Go to page of 10
.
6PIN CONNECTION RED +12v constant wire (12v positive input) connect to a 12v constant, 30 A fuse built in. BLACK Ground wire, important connect to a ground. BLUE Accessories wire (12v positive output) connect to wire that controls the heater/air conditioning fan.
WIRING DESCRITION 10PIN CONNECTION BROWN Parking light wire (12v positive output) connect to parking light wire BROWN Parking light wire (12v positive output) connect to parking light wire PURPLE TACH.
4 PIN CONNECTION WHITE Switched ignition input (12v positive input) connect to ignition wire. GREEN Hand brake wire (negative input) connect to switched side of hand brake switch. BLUE Door trigger negative input, connect to negative door switch. ORANGE Brake wire (positive input) connect to the switched side of the brake pedal switch.
Learning button WIRE CONNECTION GUIDE Blue Battery Starter Accessories Ignition Yellow Brown Red White Blac k Ground Blue Orange Brake switch(positve input) Door trigger input negative Green Hand brak.
(AUDI) (BENZ)100 1 2 3 2.Negative trigger 2.Negative trigger NOTE: The system must be programmed for 4 second door lock pulses. NOTE: The system must be programmed for 4 second door lock pulses.
IMPORTANT: The installation must be complete before accessing programming mode. DOOR LOCK PULSE: Some European Vehicles such as Mercedes-Benz and Audi, require longer lock and unlock pulse to operate the vacuum pump. Start the engine, press button and at the same time.
ANTENNA INSTALLA TION POINTS TROUBLESHOOTING 5-10cm 5-10cm Mainframe Mainframe Antenna frequency head location TROUBLE SHOOT 1. Siren chirp continuously cannot be deactivating by transmitter after the installation of the control module.
TRANSMITTER OPERA TION Two Way Transmitter LOCK UNLOCK MUTE START VIBRATION TWO-WA Y TWO W A Y LCD TRANSMITTER OPERA TION 1 2 3 11 12 13 14 15 4 5 6 7 8 9 10 16 1. R transmit / Receive 2. Silent mode 3. Vibration mode 4. AM 5. PM 6. Lock 7. Impact detector alarm 8.
WIRING DESCRITION 10PIN CONNECTION BROWN Parking light wire (12v positive output) connect to parking light wire BROWN Parking light wire (12v positive output) connect to parking light wire PURPLE TACH.
An important point after buying a device PYLE Audio car security system (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio car security system yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio car security system - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio car security system you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio car security system will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio car security system, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio car security system.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio car security system. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio car security system along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
