Instruction/ maintenance manual of the product PV500-24 PVI Industries
Go to page of 4
PV500 - 24 03 - 99 Section 24 1 INSTALLATION & MAINTENANCE MANUAL FOR QuickDraw INSTANTANEOUS ENERGY: WATER TO WATER U - TUBE SINGLE - WALL & DOUBLE - WALL HEAT EXCHANGERS TYPICAL CONSTRUCTION FIGURE 24 - 1 1. U - tube Heat Exchanger 9. Boiler Water Temperature Gauge * 2.
PV500 - 24 03 - 99 Section 24 2 QuickDraw WATER WITH SINGLE - WALL / DOUBLE - WALL START - UP OPERATION 1. The boiler water circulating pump has been selected to provide optimum flow through the heat exchanger tubes to meet demand with the available boiler water.
PV500 - 24 03 - 99 Section 24 3 QuickDraw WATER WITH SINGLE - WALL / DOUBLE - WALL (con't) ELECTRICAL The heater is wired for 120 volts and must be electrically grounded in accordance with local codes, or in the absence of local codes, with the latest ed ition of the National Electrical Code ANSI/NFPA.
PV500 - 24 03 - 99 Section 24 4 QuickDraw WATER WITH SINGLE - WALL / DOUBLE - WALL (con't) WARNING: Make sure valve is piped to a proper drain per instructions. Scalding injury and/or water damage can occur from either the manual lifting of the lever or the normal operation of valve if it is not piped to a proper drain.
An important point after buying a device PVI Industries PV500-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PVI Industries PV500-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PVI Industries PV500-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PVI Industries PV500-24 you will learn all the available features of the product, as well as information on its operation. The information that you get PVI Industries PV500-24 will certainly help you make a decision on the purchase.
If you already are a holder of PVI Industries PV500-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PVI Industries PV500-24.
However, one of the most important roles played by the user manual is to help in solving problems with PVI Industries PV500-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PVI Industries PV500-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
