Instruction/ maintenance manual of the product 25 Psiber Data Systems
Go to page of 2
LINK SIGNAL TYPE Three different signals can be used to establish a Link: a Link Code Word, an NLP or an MLT-3 waveform. The Link Code Word is specific in both Link speed and duplex mode. The NLP is specific in speed (10Mbps) but ambiguous in duplex mode (half or full).
BOX CONTENTS • LanMaster 25 Link Tester • RJ-45 Coupler • 9 Volt Alkaline Battery • User Guide B A TTER Y The LanMaster 25 operates on one 9 volt alkaline battery. Remove the battery cover at the bottom of the unit and insert the battery with the terminal orientation as shown.
An important point after buying a device Psiber Data Systems 25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Psiber Data Systems 25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Psiber Data Systems 25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Psiber Data Systems 25 you will learn all the available features of the product, as well as information on its operation. The information that you get Psiber Data Systems 25 will certainly help you make a decision on the purchase.
If you already are a holder of Psiber Data Systems 25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Psiber Data Systems 25.
However, one of the most important roles played by the user manual is to help in solving problems with Psiber Data Systems 25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Psiber Data Systems 25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
