Instruction/ maintenance manual of the product PD 3.5 PS Audio
Go to page of 8
T able of Contents 1. What’s in the Box 2. W arning 2. Overview 3. Quick Start Guide 4. Rear Panel 5. Front Panel 5. DC trigger 5. Logo trim tool 6. T roubleshooting Guide 7. W arranty and Service 8. Contact Information What’s in the Box • One Power Director 3.
Warning T o prevent fire or shock hazard, do not expose the Power Director 3.5 to rain or moisture. T o avoid electrical shock, do not open the enclosure. Refer servicing to quali - fied personnel only . T o prevent electric shock, use only a 3 prong, grounded type power cable.
Setup Guide 1. Place the Power Director 3.5 in a rack or on a shelf in an Audio/Video system. The Power Director 3.5 produces no heat, so placement of the Director is a simple matter of preference. It is safe to stack equipment up to a total of 20 pounds on top of the Director.
1. Power mode switches The Power mode switches correspond to each of the Power Zones. These switches are used to control how the power zones respond to the front panel power button. They can be set in the following ways: • Always On [ON] - With the switch in the ON position, the zone will receive power as soon as the Power Director 3.
Front Panel Power On/Off Pressing the Power button will toggle the unit from standby mode to operate mode. When in operation mode the Director will output AC power to any of the three zones that are set to the delayed (DL) or switched (SW) position on the rear panel.
Troubleshooting Guide In the event you experience dif ficulties with the operation of your Power Director 3.5, we of fer the following suggestions: Unit will not turn on. 1. Check the obvious. Is it plugged in, and is the AC wall outlet live? 2. Check the circuit breaker on the Power Director 3.
Specifications Input: AC input range - 95-105 V olts 105-125 Volts 210-250 Volts (depending on model) Frequency input - 50/60 Hz Output: Frequency - 50 - 120 Hz Current - 15 Amps General Width - 17.25 in Height - 4.25 in Depth - 13 in Weight - 14 lbs Warranty and Service Inside the U.
PS Audio International, Inc. 4826 Sterling Dr . Boulder , CO 80301 USA T oll Free: 877-772-8340 Ph: 720-406-8946 Fax: 720-406-8967 www .psaudio.com.
An important point after buying a device PS Audio PD 3.5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PS Audio PD 3.5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PS Audio PD 3.5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PS Audio PD 3.5 you will learn all the available features of the product, as well as information on its operation. The information that you get PS Audio PD 3.5 will certainly help you make a decision on the purchase.
If you already are a holder of PS Audio PD 3.5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PS Audio PD 3.5.
However, one of the most important roles played by the user manual is to help in solving problems with PS Audio PD 3.5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PS Audio PD 3.5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
