Instruction/ maintenance manual of the product 70443r2 Proxim
Go to page of 15
P/N 70443r2 T sunami QuickBridge II T1/E1 V ersion 2.2 Quick Inst all Guide.
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 2 Introduction The QuickBridge is a com plete kit for enabling a wire less broad bandwidth link between two locations. The equipment is pre-configured at the factory to be mount ed and con ne cted to your LAN network.
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 3 STEP 2. UNPACK THE SHIPPIN G B OX CONTENTS The product’s shipping boxes shoul d be left intact and shelte red until arrival at the installation site.
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 4 STEP 3. PRE-ASSEMBLE HARD WARE Proxim recommends that you pre-assemble the radio mounting .
Tsunami QuickBridge II T1/E1 Quick Install Guide 4. Place the other mounting bracket se ction on the two bracket mounting screws and loosely secure them with the bolts supplied. These bolts are used later to mo unt the radio unit to a pole (as shown in the second figure below).
Tsunami QuickBridge II T1/E1 Quick Install Guide 3. Connect the RJ45 connector on the inte rface cable to the RJ45 port on the back of the radio. Hand-tighten the connector nut; do not use the wrench to tighten the connector. Connect the other end of the interface cable to the Power & Ethernet Adapter.
Tsunami QuickBridge II T1/E1 Quick Install Guide To connect the Power & Ethernet Adapter to a switch or a hub, use a crossover Ethernet cable . 5. If your installed radio is connected to a swit ch or a h ub, connect your PC to the same switch or hub .
Tsunami QuickBridge II T1/E1 Quick Install Guide P OLYPROPYLENE F IBER S OUND A BSORPTION P AD STEP 6. INSTALL THE SOFTWARE The QuickBridge II include s configuration software (the QuickBridge Manager), which provides basic setup and operating capabilities.
Tsunami QuickBridge II T1/E1 Quick Install Guide 4. The Choose Install Folder screen is di splayed. The recommended installation directory is C:Program FilesQuickBridge Manager 2.1 . Click Next when you have made your select ion or to acce pt the default folder.
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 10 2. Connect the PC to the Master unit; start the Manager program by clicking on the QuickBr idge Ma nager icon.
Tsunami QuickBridge II T1/E1 Quick Install Guide Mounting the Radio to a Pole The radio is designed to mount dire ctly to a pole. Using optional mounting b ra ckets, you can mount the radio to a wall or other flat surface (see “Mount ing the Radio to a Flat Surfa ce”).
Tsunami QuickBridge II T1/E1 Quick Install Guide Configuring the QuickBridge Radios ESTABLISHING A CONNECTION From the Connection window, cli ck on Discover Radio(s) . The QuickBridge Manag er program should discover all local radios and display the IP addre ss of each discovered unit in the Radio(s) Available field.
Tsunami QuickBridge II T1/E1 Quick Install Guide 4. If the wireless link is establis hed, you can select either the Local or Remo te device to control from the Selected Radio box. Note: The Selected Radio box is available on all configuration win do ws.
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 14 REVIEWING THE MAST ER UNIT’S STATUS From the Link Status window, review the current status of both ends of the QuickBridg e link; in this case, the locally connected radio (Master) and the remote radio (S lave).
Tsunami QuickBridge II T1/E1 Quick Install Guide Copyright © 2005 Proxim Corporation. All rights reserved. 15 TECHNICAL SUPPORT If you are having a problem using a Tsunami QuickBri dge pr oduct and c.
An important point after buying a device Proxim 70443r2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Proxim 70443r2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Proxim 70443r2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Proxim 70443r2 you will learn all the available features of the product, as well as information on its operation. The information that you get Proxim 70443r2 will certainly help you make a decision on the purchase.
If you already are a holder of Proxim 70443r2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Proxim 70443r2.
However, one of the most important roles played by the user manual is to help in solving problems with Proxim 70443r2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Proxim 70443r2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
