Instruction/ maintenance manual of the product SA-16400SDI-E(2U) Provision-ISR
Go to page of 124
Menu Select Channel Mode - + Manual Record Recording System DV R User Man ual All rights r eserved www .pr ovision-isr .com.
Digit al V ideo Recorder User Manua l CAUTION R ead this user manual car efully to ensure correct and s afe use of y our PROVISION - ISR DVR. T he content of this manual could be outdated or in correct, for any clarification contac t PROVISION - ISR support.
Digit al V ideo Recorder User Manua l Table of C ontents 1 Intro duction ..................................................................................................................................................................................
Digit al V ideo Recorder User Manua l 2.3.13 Rear P anel Descri ption (S A - 8200SDI) ......................................................................................................................................... 25 2.3.14R ear Pane l Des cription (SA- 16 200SDI/S A - 16400S DI) .
Digit al V ideo Recorder User Manua l 4.3.4 St amp ............................................................................................................................................................................................. 42 4.3 .5 Recycle record .
Digit al V ideo Recorder User Manua l 5.4 Im age ........................................................................................................................................................................................................ 68 5.
Digit al V ideo Recorder User Manua l Remote Inf ormation Search .................................................................................................................................................................... 88 8 Mob ile Surveil lance .
1 Digit al V ideo Recorder User Manua l 1 Introduction 1. 1 DVR I ntroduction Thesemodel DVR s (Digit al V ideo Recorder) are designed sp eci fical ly for CC TV syste m. The device c ontains highperf ormance video process ing chips and an embe d d ed Li nux system, i t u tilizes adv anced sta ndard t echnologies, su ch as H.
2 Digit al V ideo Recorder User Manua l • Supports zoomX4 option during playback . BACKUP • Support s USB 2.0 devices for backup . • Support s instal lation of a built - in SA T A DVD wr it e r for back up (not small 1U c ase DVR) . • Support s saving rec orded files with A VI st andard format for a remote computer through internet .
3 Digit al V ideo Recorder User Manua l PTZ CONTROL • Support s multiple PTZ protocols . • Support s 128 PTZ presets and 8 auto c ruise tracks . • Support s rem ote PTZ control through internet .
4 Digit al V ideo Recorder User Manua l 2 Hardware Installation Notic e : Check the unit and the ac cessories after getting the DVR. shut down the device and unpl ug the power line before any new connec tions to other d evices .
5 Digit al V ideo Recorder User Manua l 2.1. 2 Install the DVD Writer ( 1U DVR cas e ) Notic e : 1 . The DVD writer s must be on the compatible devic es l ist .
6 Digit al V ideo Recorder User Manua l 2.1. 4 Install the Hard Driv e (2U DVR case) Notice : 1. T his ser ies support four SA T A hard driv es or thre e SA T A hard drive s plus one DV D writer . (User can also choos e to install eight SA T A hard drives or four SA T A hard drives plus one DVD w riter .
7 Digit al V ideo Recorder User Manua l Step 3: In stall other thre e HDD according to above - mentione d method. Then cover the uppe r iron bar and scr ew it firmly .
8 Digit al V ideo Recorder User Manua l 2.1. 5 Install the DV D Wr it e r (2U DVR case) Step 1 : Unscrew and open the c ase . Then unscrew the scre ws on both sides to re move the upp er bar as show n below: Step 2: Install the DVD holder that came with the d evice.
9 Digit al V ideo Recorder User Manua l 2. 2 F ront P anel De s cript ions : 2.2. 1 Front P anel Description ( 1U DVR c ase ): Ite m Typ e Name Descript ion 1 W ork state indicato r Power P ower indi .
10 Digit al V ideo Recorder User Manua l 2.2. 2 Front Pane l Description ( small 1U DVR case ): Item Ty p e Name Descripti on 1 W ork state indicato r Power Power i ndicat or, wh en connec tion , the .
11 Digit al V ideo Recorder User Manua l 2.2. 3 Front P anel Description ( 2U DVR c ase ) Item Name Funct ion 1 Power B utton Soft switch off to s top firm ware ru nning. Do it bef ore p ower off . 2 DVD but ton Press thi s but ton, us er can pl ace th e DV D to do backup .
12 Digit al V ideo Recorder User Manua l Item Name Funct ion BACKUP Enter b ackup m ode i n live SEARCH Enter se arch m ode REW Rewind FF Fa st forwar d REC Record m anual ly PLAY Play/Pause STOP Stop/Esc 10 Jog dial Control rewind/ fast fo rward/ frame when playing t he im age.
13 Digit al V ideo Recorder User Manua l 2. 3 RearPan el Descri ptions 2.3. 1 R ear Panel Description ( SA - 4100 HDX+ ) Item Name Description 1 Ground connection Grounding (also for the alar m in gro.
14 Digit al V ideo Recorder User Manua l 2.3. 2 Rear Panel De s cription (SA - 4100HD E +) Item Name Description 1 Audio in 4 CH Audio input 2 Video in Video input channels from 1 -4 3 Ground Groundin.
15 Digit al V ideo Recorder User Manua l 2.3. 3 Rear Panel De s cription (SA - 8200N +) Item Name Description 1 Audio in 4 CH Audio in put 2 Video in Video input channels from 1 -8 3 Ground Grounding .
16 Digit al V ideo Recorder User Manua l 2.3. 4 Rear Panel De s cription (SA - 16400N +) Item Name Description 1 Audio in 4 CH Audio input 2 Video in Video input channels from 1 - 16 3 Ground Groundin.
17 Digit al V ideo Recorder User Manua l 2.3. 5 Rear Panel D escripti on (SA - 16400N E +) Item Name Description 1 Power sw itch ON/OF F sw itch 2 P/Z Connect to speed dome (RS48 5 PTZ c amer as) 3 K/.
18 Digit al V ideo Recorder User Manua l 2.3. 6 Rear Panel Desc ription (S A - 8200HD+) Item Name Description 1 Power sw itch ON/OF F sw itch 2 P/Z Connect to speed dome (RS48 5 PTZ c amer as) 3 K/B C.
19 Digit al V ideo Recorder User Manua l 2.3. 7 Rear Panel Desc ription (S A - 8100SDI) Item Name Description 1 ALARM OUT 4- ch relay o utput. Connect to external alarm 2 P/Z Connect to speed dome (RS.
20 Digit al V ideo Recorder User Manua l 2.3. 8 Rear Panel Desc ription (S A - 4025SDI) Item Name Description 1 P/Z Connect to speed dome (RS48 5 PTZ c amer as) 2 K/B Connect to k eyboard 3 ALARM IN C.
21 Digit al V ideo Recorder User Manua l 2.3. 9 Rear Panel Desc ription (S A - 4100SDI) Item Name Description 1 ALARM OUT 4- ch relay o utput. Connect to external alarm 2 P/Z Connect to speed dome (RS.
22 Digit al V ideo Recorder User Manua l 2.3. 10 Rear Panel Desc ription (S A - 24600) Item Name Description 1 VGA VGA output, connect to m onitor 2 Video out C onnect to m onitor 3 Video in V ideo i .
23 Digit al V ideo Recorder User Manua l 2.3. 11 RearP ane l Descri ption (SA - 32800) Ite m Name Descript ion 1 Video out C onnect to moni tor 2 Video in V ideo inp ut cha nnels( 1 - 32 -ch ) 3 POWER INPUT 110 VAC or 23 0V AC 4 Loop O ut (17 - 3 2) Video out (wit h a 1 6 channel plu g) for c hannels 17 - 32.
24 Digit al V ideo Recorder User Manua l 2.3. 12 RearP ane l Descri ption (SA - 8200D1SDI) Ite m Name Descript ion 1 Video out C onnect to moni tor 2 Spot Connect to monitor with no menu display 3 A u.
25 Digit al V ideo Recorder User Manua l 2.3. 13 RearP ane l Descri ption (SA - 8200SDI) Ite m Name Descript ion 1 Video in HD SDI V ideo i nput c hannel s(1 -8) 2 Video out C onnect to moni tor 3 A u.
26 Digit al V ideo Recorder User Manua l 2.3. 14 RearP ane l Descri ption (SA - 16200SDI /SA - 16400S DI ) Ite m Name Descript ion 1 Video in HD SDI V ideo i nput c hannel s(1 - 16 ) 2 Video out C onn.
27 Digit al V ideo Recorder User Manua l 2. 4 Remot e C ontrol ler The remot e requires two AA A size batteri es . Fo r ins tall ing the batteries o pen the battery c over on the Rem ote C ontroll er , p l ace two batteries according to th e correct polar ity marked on t he remote (+ and -) , the n fas ten the b attery cover to bac k its pla ce.
28 Digit al V ideo Recorder User Manua l Item Name Function 1 P ower But ton Soft switch off to stop f irmware runni ng. Do it befor e power off. 2 INFO Button Get infor mation about th e DVR like fir.
29 Digit al V ideo Recorder User Manua l The "smal l 1U " DVR models c onta in the sm all remo te c ontr oll er . Item Name Function 1 REC S tart or stop m anu al rec ordi ng 2 SEARCH Go to .
30 Digit al V ideo Recorder User Manua l 2. 5 Control w ith Mouse 2.5. 1 Con nect Mou se The DVR supports USB mous e through the p orts on the re ar panel, plea se refer to Fig2. 8. Notic e : If mouse is n ot detected or doesn't work: 1. Make sure the mouse is plugged to the co rrect USB mous e port not the USB port 2.
31 Digit al V ideo Recorder User Manua l 3 Basic Function Instruction 3. 1 P ower On/Off B efore you power on the un it, please make s ure all the cables are conn ecte d properly .
32 Digit al V ideo Recorder User Manua l 3. 2 L ogin Yo u can login and log out from the DVR sy stem. After logout t he user cannot o perat e except changing the m ulti - screen dis play .
33 Digit al V ideo Recorder User Manua l 3.3. 1 L ive playback Click Play button to playbac k record ings . Yo u can change sett ings by c lick ing on the buttons on screen.
34 Digit al V ideo Recorder User Manua l 4 Main menu setup guide C lick right mouse or press ESC button on the front pan el : the c ontrol bar w ill appear on the bot tom of th e screen, ref er to Fig 4 - 1: Fig 4 - 1 main menu toolbar C lick the icon beside " screen mode " to selectthe channel s .
35 Digit al V ideo Recorder User Manua l Fig 4 - 2 main menu configuration menu 4. 1 Basic c onfiguration The basic c onfiguration has three sub menus: system , date& time and DST .
36 Digit al V ideo Recorder User Manua l P assword ch eck: enabl ing this option prompts user na me and passw ord before user can perform op erations on the DVR . S how Sy stem time: display s the tim e i n li ve vi ew . Startup w iza rd : This option enables the wizar d on s tartup .
37 Digit al V ideo Recorder User Manua l 4.1. 3 D ST Syst em configurat ion => basic conf iguration => DST ; refer to F ig 4 - 5: I n this inter face you can enable daylight saving time , s et the DST time offset, mode, star t & end month/w eek/date .
38 Digit al V ideo Recorder User Manua l Fig 4 - 6 live configurati on live Fig 4 - 7 live - color adju stment S tep3: clic k ing the“ setti ng ” button wi l l pop - up a window ( Fig 4 -7) in this inter face, you can adjust br ightness, h ue, saturatio n and contrast in live .
39 Digit al V ideo Recorder User Manua l C lick button to s et the next channel group. S tep5: click “ default ” button to res ort default sett ing; click “ apply ” button to save the setti ng; click “ exi t ” button to exit c urrent interface.
40 Digit al V ideo Recorder User Manua l S etup mask area L ive image ma sk area 4. 3 Record configura tion R ecord configur ation includes six sub menus: enabl e, record bit r ate , ti me , rec ycle re c ord , stam p and snap for NE o rHD series . 4.
41 Digit al V ideo Recorder User Manua l 4.3. 2 R ecord stream S tep1: go to system configur ation recor d configuration r ecord bit rat e ; refer to Fig 4 - 12: S tep2: setup rate, resolu tio.
42 Digit al V ideo Recorder User Manua l Expire ti me: the max imum time a r ecording will b e in th e system . I f the set date is overdue, t he record files will be deleted a utomatically . To setup all channels w ith the same parame ters ma rk “ al l ” a nd then click "apply".
43 Digit al V ideo Recorder User Manua l B efore repos itio nin g after repos itio nin g 4.3. 5 R ecycle record S ystem configur ation => record configuration => recycle rec o rd ; mark" recycle record " to enable recycl e reco rd ing .
44 Digit al V ideo Recorder User Manua l Fig 4 - 15 schedul e configur ation - schedule S tep2: select channel and d ouble - clic k to pop up a w indow as Fig 4 - 1 6.
45 Digit al V ideo Recorder User Manua l C lick “ OK ” button t o save the s etting; click “ Exi t ” button to ex it current interf ace. • I f the user w ants to apply the schedule setting of certa in channel to oth er or all chann els , he needs to select channel and click “ Copy ” button.
46 Digit al V ideo Recorder User Manua l 4. 5 A larm configuration A larm configur ation include s five sub men us: sensor , m otion, video l oss, other alar m and alarm out. 4.5. 1 Sensor S ensor inclu des three sub m enus: basic, al arm handling an d schedule.
47 Digit al V ideo Recorder User Manua l Fig 4 -20 alarm handli ng - trigger Fig 4 - 21 alarm configura tion - sensor - alar m handling Full screen a larm: w hen alarm is triggere d, there will p op up full scree n alarm; E mail: Se lect this funct ion.
48 Digit al V ideo Recorder User Manua l • S chedule Syst em co nfiguration => alar m configuration => sensor => sched ule ;R efer to Fi g 4 - 22: T he setup steps of sensor schedu le are simila r wi th allschedul e s; R efer t o 4.4.1 Sc hedule for det ails.
49 Digit al V ideo Recorder User Manua l Ne xt : click Area but ton, a dial og box will pop - up as Fig 4- 24 a and 4 - 24b. T o s et th e sensitivity value ( 1- 8) drag the slide bar in the Area interf ace, the default v alue is 6 . T he higher the value the hig her the sensitivit y to mov ement, meaning more event s will be recorded .
50 Digit al V ideo Recorder User Manua l To setup all channe ls with the same parameter s choose“ all ”then apply to save relevant set up to all channels . Reset default setting; click the“ default ” button and then“ apply ” butt on to save the setting .
51 Digit al V ideo Recorder User Manua l 4.5. 4 O ther alarm Select syst em configuration other alarm (as s hown in Fig 4 - 27 ) Disk full: Yo u c an choo se the capacity of the dis k storage and select th e related alar m. If the disk is f ull, the system will perfor m according to t he setup.
52 Digit al V ideo Recorder User Manua l 4.5. 5 A larm out A larm out includes three sub menus: alarm out,sche dule and buzz er • A larm out S ystem conf iguration => ala rm out; refer to F ig 4 - 28: Yo u can set re lay alarm out name and select hold tim e (t he interval t ime between t he two adjacent alarms ).
53 Digit al V ideo Recorder User Manua l 4. 6 N etwork configura tion N etwork conf iguration inclu des four sub menus: networ k, sub stream, E mail and other s ettings. 4.6. 1 N e tw ork S tep 1: M ain m enu => system configuration => n etwork config uration => netw ork; refer to Fig 4 - 29: T he default HTTP port is 80.
54 Digit al V ideo Recorder User Manua l 4.6. 2 Sub stream S yste m config uration => net work configuratio n => sub stream; r efer to Fig 4 - 30:select fp s, resolution, quality , encode and max bit rate To setup al l channels with the same paramet ers choose“ all ”then ap ply to sa ve relevan t setu p to all channels .
55 Digit al V ideo Recorder User Manua l 4.6. 3 E mail system conf iguration => networ k c onfigur ation => email; ref er t o Fig 4 - 31 SMTP Server/Port: the nam e and port nu mber of SMT P server .
56 Digit al V ideo Recorder User Manua l Fig 4 - 32 netw ork configurati on - other setting s Using UPnP : A technician m ay prefer to use UPnP to a ccess the DVR remotely from the W AN : enable UPnP function in the us er ’ s router and t he DVR.
57 Digit al V ideo Recorder User Manua l I f “ Show icon s for networked U PnP devices ” can ’ t display in the“ Netw ork Tasks ” list box , please follow t he below operatio n: C lick .
58 Digit al V ideo Recorder User Manua l 2) Fill in the r egistration f orm, then clic k " S ubmi t " (figure 4- 36 ) 3) Fill in the host na me you want t o apply for .
59 Digit al V ideo Recorder User Manua l U ser management c onf igura tion S tep 1: ente r into syste m configurati on => user manag ement configuratio n; refer to Fig 4 -38: S tep 2: clic k Add bu.
60 Digit al V ideo Recorder User Manua l 4. 7 P .T .Z configuration P .T .Z configuration inc ludes two submen us: serial port and advance ① S eria l port S ystem config uration => P .
61 Digit al V ideo Recorder User Manua l ③ A dvance C onfigurati on => P .T .Z conf igura ti on => advance; R efer to Fig 4 - 42 : c l ick p res et “ Setting ” button t o see a dialog b ox as Fig 4 - 43 : Fig 4 - 42 P .T .Z confi guration - adv ance Fig 4 - 43 advance - preset setting a.
62 Digit al V ideo Recorder User Manua l Fig 4 - 44 pres et set - set ting b .user can c ontrol the d ome rotates up, up left , down, right down, left , left down, righ t a nd up right a nd stop rotating ; a djus t the rotate spe ed and the valu e of zoom, fo cus and iris of t he dome ; c.
63 Digit al V ideo Recorder User Manua l adjust the position of th e pres et point. C lick Preview butt on to prev iew the crui se line; cli ck OK butto n to save th e settin g; click Exit butto n to exit current interface w ithout saving . c. select a pres et point in the cr uise line list box .
64 Digit al V ideo Recorder User Manua l 4.8. 1 R eset R eset all settings th e device will re boot, plea se note: perfor m the reset only after con sulting with a technician .
65 Digit al V ideo Recorder User Manua l 5 Record search & playback and backup S earch config uration inc ludes four sub menus: time searc h, event search, file managem ent and image.
66 Digit al V ideo Recorder User Manua l N ote: the verti cal column representst he time ( hour s ) , while the horizont al column representsth e channels. Another option is to click P lay button t o playback re cord on the main screen to start play of last 30 minutes.
67 Digit al V ideo Recorder User Manua l Fig 5 - 2 Search configur ation - ev ent search Cli ck o n the " Search " button to display th e e vent informa ti on i n the event list box . Here you can s elect the date and cha nnel. Y ou can choo se events by m ot ion, s ensor or All according ly .
68 Digit al V ideo Recorder User Manua l U nlo ck: select a locked file and click the " Lo ck " butto n to unlock this file . D elete: select an unlocked fi le and click De lete button to d elete this fi le. A fter selecting the “ Al l ”button user can lock , unlock or delete all files in th e file manage ment column.
69 Digit al V ideo Recorder User Manua l 6 M ana ge DVR 6. 1 Check sy stem inf ormation Displaysthe s ystem inf orma tion .Thi s i nclude s five submenus : system, event, l og, network and online us er . 6.1. 1 S ystem information I n th is interface , user can che ck the hardwar e version, M CU version, kernel v ersion, dev ice ID, etc.
70 Digit al V ideo Recorder User Manua l 6. 2 M anual al arm This option is used to activ ate the alarm manually , this option also activate s the buzzer . 6. 3 D isk man agement 1. Format the dis k Go to" disk manag ement " N ote: pl ease format the hard disk before starting a reco rd ing.
71 Digit al V ideo Recorder User Manua l 7 R emote Surveillance 7. 1 IE Remot e Surveillan ce T o view the DVR fr om a netw ork it must be connected to a modem or router t hrough the L A N /W AN .The netw ork setup should be done accord ingly . Please r efer to4.
72 Digit al V ideo Recorder User Manua l Step 6: IE will download A ct iveX automatic ally . Then a window pops up and asks for user name and password.Inp ut us er name and pa ssword correct ly , and e nter to view . Note : If you cannot downl oad and inst all A cti veX, please refe r to Q&A.
73 Digit al V ideo Recorder User Manua l 7. 2 Remote S urveillance through Macinto sh w ith Safari: Note : t he current plug - in version supports o nly the 32 - bit mode, so the safari br owser must w ork on 32 - bit mode. This works for L ion OS, with Saf ari 5.
74 Digit al V ideo Recorder User Manua l 7.2. 1 On LA N Step 1: Af ter starting A pple computer , click icon. The f ollowing window will pop up. Please select “Sy stem Preferences” ”Internet.
75 Digit al V ideo Recorder User Manua l Step 2: Ent er into Netw ork interface and then click “Et hernet C onnected” to che ck the internet co nnection of Apple PC.
76 Digit al V ideo Recorder User Manua l Step 5: Cli ck icon and then select t he Active X co ntrol, the w elcome interfac e will be show n. Click “Continue” ”Install” butt on ， t he following w indow w ill pop up ： Input the name and passw ord of Apple PC a nd then click “OK” to install t his Active X control.
77 Digit al V ideo Recorder User Manua l 7. 3 The remo te liv e preview inter face Fig 7 - 2 Remote live previe w inter face Sy mbol and function Definiti ons: ① Channel in dic ator ② Screen displ.
78 Digit al V ideo Recorder User Manua l N ote: cli ck button to rec ord manual and the re cord file will b e saved in user’ s PC. S creen displ a y mode: C lick the icon beside the screen displ ay .
79 Digit al V ideo Recorder User Manua l P lease conne ct speed dom e to the devic e via RS485 fir stly , make sure t he protocol of the speed dome is su pported by t he device and s et the relative parameters manua lly .
80 Digit al V ideo Recorder User Manua l C lick the righ t mouse on the live interf ace, a pull - dow n menu will appear as below Stream: this DVR s upports master stream and sub stream.
81 Digit al V ideo Recorder User Manua l Fig 7 - 5 Play record file int erface.
82 Digit al V ideo Recorder User Manua l T his DVR sup ports remote t ime search, event search and file management. B y T ime Search: S tep1: Enter into Search time search; refer to Fig 7 - 6: Fig.
83 Digit al V ideo Recorder User Manua l S tep2: click “Search” button . T he record data will be displayed in the data inf ormation lis t box; the highlight dat e in the are a ② means hav e rec.
84 Digit al V ideo Recorder User Manua l B y Ev ent Search: S tep1: Enter into Search ev ent search; refer to Fi g 7 - 8: Fig 7 - 8 event search inte rface Step2: click the highlight date and sele ct record channel s and then mark the event t ype: motion an d sensor .
85 Digit al V ideo Recorder User Manua l F ile Manag ement S tep1: Enter into Search file mana gement ; refer t o Fig 7 - 9: Fig 7 - 9 file managem ent interface L ock: sele ct certain file item i.
86 Digit al V ideo Recorder User Manua l 7.4. 2 R emote backup C lick Backup button to ent er into backu p interface, ref ers to Fig 7 - 10: Fig 7 - 10 remot e backup inte rface S tep1: select channel.
87 Digit al V ideo Recorder User Manua l 7. 5 R emote S y stem configuration User can remot e setup the param eters of the dev ice. Function s of remote co nfiguration s inc lude : basic configura tio.
88 Digit al V ideo Recorder User Manua l 7. 6 Remot e Management Remote Inf ormation Searc h The syste m will autom atically rec ord the w orking conditi on and operat ion process during the perio d of work . U ser c an view informati on, such as usernam e, IP addre ss and so on.
89 Digit al V ideo Recorder User Manua l 8 M obile Surveillance Thi s DVR supports m obil e surveillan ce by IPhone , Android, blackberry or smart phones w ith Window s mobile and S ymb ian OS , though the serv ice may depend on the cel lular service prov ider and 3G netw ork availabil ity and funct ion .
90 Digit al V ideo Recorder User Manua l 8. 2 SuperLivePro 1.0 M anual (for iOS) Login interf ace Input serv er ’s IP address (or d omain name), us er name and pas sword Click “Reme mber server” to s ave the setting; cl ick button user c an quick input saved serv er address, user name and pas sword.
91 Digit al V ideo Recorder User Manua l Main screen Enlarge pictur e 2- way audio Color adjust ment PTZ PTZ Presets.
92 Digit al V ideo Recorder User Manua l NavBar Icon meaning : Quick Lau nch Bar Instructi on: Ges tur es i nstr uctio n ： 1 .) T ap to select t he current ch annel, double t ap the live image to sw itch to s ingle channel or m ult i - channel displaying .
93 Digit al V ideo Recorder User Manua l Using the playback inte rface you can play back files on t he DVR, follow the next step s just like on the web or local interface: Search menu Time search Remo.
94 Digit al V ideo Recorder User Manua l Configuration and information interface to change DVR settings : Settings menu Basic menu Record menu Network menu Email menu PTZ menu Sy stem menu Network men.
95 Digit al V ideo Recorder User Manua l Device list interface for quick login (figur e 8.1.8 - 8.1.9): Fig. 8.1.8 Fig. 8.1.9.
96 Digit al V ideo Recorder User Manua l 8. 4 Windows M obile applica tion Step1 ： F irstly activ ate the net work access on mobile phone and then run “ I nternet Explor er ” . I nput the serv er ’ s addres s and the connection is bui lt up show n as below pic ture in the left: Step2 ： C lick on the software name .
97 Digit al V ideo Recorder User Manua l 8. 5 S ym b i a n OS applic ation Please use th e smart phone s with symbian version supp orted by this un it. T he detail inform ation is as follow s: Symbian S 40 support Symbian UIQ support Symbian S 80 support Symbian S 60 support Symbian S 60 3 rd Edit ion - Symb ian OS v9.
98 Digit al V ideo Recorder User Manua l Step3 ： A welcome w indow will pop up and requir es a package. C lick the softw are name to dow nload . R efer pict ure in the r ight: Step4 ： A security w indows w ill pop up after dow nloading and as k if install th e package.
99 Digit al V ideo Recorder User Manua l Notic e : User name an d password here ar e the same wi th that used on the DVR. The default is admin a nd 123456. Step10 ： In Live V iew , users can do snaps hot, change ch annels and contr ol PTZ. R efer p icture in the r ight: 8.
100 Digit al V ideo Recorder User Manua l 4. Finished dow nloading, the softw are will b e insta lled automatically . N ote: If the software fai ls to downlo ad, please check in accordan ce with the follo wing steps: 1. Check w hether the netw ork of mobile phon e is normal or n ot 2.
101 Digit al V ideo Recorder User Manua l Note ： When user used th e SuperCam soft w are in mobile phone with t ouch screen, ther e will be compatibl e problem. Solution: E nter into Options M enu - >Advance option s - >Applications - >SuperCam and click “D isable Compatib ility” button.
102 Digit al V ideo Recorder User Manua l 2. Main inter face 3. Live view Play back playback re cord file Image image view Log log record Server List device list Information device informat ion vie w .
103 Digit al V ideo Recorder User Manua l Note: User can click Return butto n on the Blackb erry phone to re turn the prev ious interface. Mar k 1 Current view ing channel Mar k 2 Channel status Switc.
104 Digit al V ideo Recorder User Manua l 4. Server list 5. Software configur ation 6. Information v iew.
105 Digit al V ideo Recorder User Manua l A p pendix A Q& A Q1. W h y can't the DVR star t after connect i ng t o the pow er? a. T he adapter has be en damaged or i s malfunctioned, change power ada pter . b. T he HDD might be malfunctioni ng Please remov e the HDD to chec k.
106 Digit al V ideo Recorder User Manua l Q6 . Cannot rec ord a. HDD not formatted . F or mat it manua lly to F A T32 first. b. The r eco rd f unct ion is dis able d or the set up is not correct . Please ref er toChapter 5 R ecord , search, play back and bac kup .
107 Digit al V ideo Recorder User Manua l ② select S ecurity ------ Custom Level … .Refer to Fig 8- 1 ③ Enable al l the sub options u nder “ ActiveX controls and plug - ins ” refer to Fig 8- 2 ④ T hen cli ck ok to fi nis h setup . b. Other p lug - ins or anti - virus block activeX .
108 Digit al V ideo Recorder User Manua l Q9 : when DVR start s, it disp la y s “please wait…”al l the time First option : hard - disk data ca ble is ca usi ng th e pro blem . Solution: shut down and unplug the DVR fr om the pow er , check the ca bles con nect ed t o the hard - disk are c onnected.
109 Digit al V ideo Recorder User Manua l Q1 2 : Whatare the minimum configurati ons of P C for client s connecting? PC Module Parameters CPU Intel Celero n 2.4G Mother board Intel 845 HDD 80G RAM 512M VGA NVIDIA G eForce MX440/ FX5200 A TIRADEON 7500/ X 300 OS Windows 2000(SP 4 above) /Windows X P(SP2 above) /VI ST A Direct X 9.
11 0 Digit al V ideo Recorder User Manua l a. Enter Contr ol Panel User Account and F amily Safety User Account Con trol(refer t o below pictur e); click T urn User Account on or of f. Cancel Us e User Account C ontrol (UAC) to help protect your computer .
111 Digit al V ideo Recorder User Manua l A p pendix B Cal culate R ecord ing Capacity Users can cal culate the siz e of hard disk ac cording to the sa ving time and DVR recording setting s. The DVR uses fix ed video bit rate. T he below are the details at di fferent settings.
11 2 Digit al V ideo Recorder User Manua l A p pendix C Co mpati ble De vices 1. V erified &c ompati ble USB drive s (Format only to F A T32) Brand Capacity SSK 512MB , 1G, 2GB Netac 4GB Kingston 2GB , 4GB Aigo 2GB Smatter v ider 1GB SanDisk 4GB 2.
11 3 Digit al V ideo Recorder User Manua l 3. V erifie d & compatible HD D lis t Brand Capacity W D AV - G P 2 0 EU R S - 73S48 Y0 2.0T W D AV - G P 1 0 E U R S - 63 0AB1 1.
11 4 Digit al V ideo Recorder User Manua l A p pendix D 4CH DV R Speci ficatio ns SA-4100HD E + SA-4100HD X+ SA-4025SD I SA-4100SD I ( 1U ) Fo r m a t D1 D1 HD- S DI SD I 1080P N um be r of Inputs 4 4.
11 5 Digit al V ideo Recorder User Manua l SA-8200N+ SA- 8200H D + (1U) SA-8200D1S D I SA-8200SD I SA- 8100SD I ( 1U ) Fo r m at D1 + CIF D1 HD- S DI + D1 SD I 1080P SD I 1080P N um be r of Inputs 4 D.
11 6 Digit al V ideo Recorder User Manua l SA- 16400N + SA- 16400N E + SA- 16400H D + (1U ) SA- 16200SD I SA- 16400SD I Fo r m a t CIF D1 + CIF D1 SD I 1080P SD I 1080P N um be r of Inputs 16 4 D 1 + .
11 7 Digit al V ideo Recorder User Manua l SA- 24600 S A - 32800 Fo r m a t CIF D1 * + CIF N um be r of Inputs 24 4 D 1* + 28 C I F L ocal Playback C han n e ls 16 16 R e m ot e Playb ack Ch an n e ls.
An important point after buying a device Provision-ISR SA-16400SDI-E(2U) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Provision-ISR SA-16400SDI-E(2U) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Provision-ISR SA-16400SDI-E(2U) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Provision-ISR SA-16400SDI-E(2U) you will learn all the available features of the product, as well as information on its operation. The information that you get Provision-ISR SA-16400SDI-E(2U) will certainly help you make a decision on the purchase.
If you already are a holder of Provision-ISR SA-16400SDI-E(2U), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Provision-ISR SA-16400SDI-E(2U).
However, one of the most important roles played by the user manual is to help in solving problems with Provision-ISR SA-16400SDI-E(2U). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Provision-ISR SA-16400SDI-E(2U) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
