Instruction/ maintenance manual of the product HG-5 ProSpot Fitness
Go to page of 29
Serial Number: ____________________HG5 PROSPOT fitness® Fusion Model HG-5 Owners Manual.
-- 2 -- HG-5 Owners Manual Table of Contents Assembly Instructions……………………..……………………… …..……..2-17 Use and Operation of Your P RO S POT fitness® Product….………………..18-22 Periodic Maintenance of your P RO S POT fitness® Product……………….
-- 3 -- Instructions for Assembly of the ProSpot fitness® HG-5 • Before assembly, choose a safe locati on for your PROSPOT fitness® HG-6 . The PROSPOT fitness® HG-5 has a footprint of approximately 8’x 8’. The surface sh ould be le vel and even.
-- 4 -- Instructions for Assembly of the ProSpot fitness® HG-5 Step #1 MAIN FRAME ASSEMBLY 1. Referencing Diagrams 1 & 2, find the part Front Cross Br ace (3). The Wire Ha rness (108) that run s thru thi s part. This may be packed in this Cross Brace to pr event damag e.
-- 5 -- Instructions for Assembly of the ProSpot fitness® HG-5 (con’t.) Step #3 FINAL FRAME ASSEMBLY 1. Now according to Diagram 3 install the Middle Cros s Brace (18) us ing M10* 65 Bolts (100), M10 Washe rs (70 and M10 Nuts (82).
-- 6 -- Instructions for Assembly of the ProSpot fitness® HG-5 (Con’t.) Step #4 WEIGHT BAR ASSEMBLY 1. Now its time to install Sensor Weight Bar (34). Reference Diagram 11. Using a 5mm allen wrench remove the M8*40 Screw (121) Head Screw & E nd Cap (45) off each end.
-- 7 -- Instructions for Assembly of the ProSpot fitness® HG-5 (Con’t.) Step #6 MESH COVERS & ACCESSORIES 1. Referencing Diagrams (1 & 12) first attach the Side Mesh Cover Frames (28 & 29) one side at a time. Set Side Frame on the hooks near the base of the unit.
HG-5 Diagram 1 Main Frame Assembly 158.
HG-5 Diagram 2 Wiring Assembly.
HG-5 Diagram 3: Main Upper Frame Assembly.
HG-5 Diagram 4: Top Panel Assembly.
HG-5 Diagram 5: Weight Stack Diagram.
HG-5 Diagram 6: Middle Cross Brace Assembly.
HG-5 Diagram 7: Cable Run Assembly Detail.
HG-5 Diagram 8: Lat Leg Hold Down Assembly Diagram 62.
HG-5 Diagram 9: Mesh Panel Frame Assembly.
HG-5 Diagram 10: Weight Bar & Accessories Assembly Detail.
-- 18 -- !!Read!! This Page Before Using Your ProSpot fitness ® Product Safe Use of Your ProSpot fitness® Product 1. CAUTION: This machine involves the risk of possible injury by its user. 2. THE FOLLOWING RULE S SHOULD BE CARFULLY FOLLOWED : • Consult a physician or other healthcare provider before beginning an exercise program.
-- 19 -- User Instructions for the HG-5 Touch Sensor Barbell Operation 1. Rotate the barbell so that the Touch Sensor Strip embedded in the barbell i s touching your fingertips. It is necessary for your fingertips to maintain ski n contact with the Tou ch Sensor Strip throughout your free-weight exercise.
-- 20 -- User Instructions for the HG-5 (cont’) Storage of Accessories: • There Accessory hooks on the side of the Upper Link ing plate s for storing the two sets stirrup handles, Nylon Rope.
-- 21 -- User Instructions for the HG-5 (cont’) VKR & Dip Station Exercises: • VKR Exercise Place right & left VKR Attachments in receive rs on Cable Head Assemblies. Attach Padded Back Rollers in Cross Frame in center positio n and lock with Pin.
-- 22 -- User Instructions for the HG-5 (cont’) Using optional FS-150 Bench: • Leg Extension: 1. Set Selector Pin on each Weight Stack to 10lbs. 2. Adjust Foot Board to the second hole by pulling on Po p Pin Knob. 3. Then attach the long Bench Cables to the low-pulley con nection using two cable clips on ea ch.
-- 23 -- Maintenance Program The HG-5 is made of durable materials and has been factory teste d to assure proper function and reliability. It is designed in a way to allow easy re placement of parts bot h mechanical and electrical if the need sho uld ever arise.
-- 24 -- Prospot Fitness Fusion HG-5 Parts List Page 1 Part# Description QTY Part# Description QTY 1 Left Base Rail 1 47 Barbell 50mm Rubber Bumper 2 2 Right Base Rail 1 48 Locking Barbell Spacer 2 3 .
-- 25 -- Prospot Fitness Fusion HG-5 Parts List Page 2 Part# Description QT Y Part# Descripti on QTY 93 Medium Single Groove Pulley 10 138 Locking Block DBL Pulley Pin 2 94 Rubber 48mm Bumper 3 139 Pr.
-- 26 -- Trouble-Shooting How the Patented ProSpot System works: Starting from the Computer Brain, a signal is sent fro m the left & right side, thru the L & R Gre y Base Frame Wire Harness (white lea d), Locking Post wire h ar ne ss to the Lower rear Cable Knuckle connector, to inside Barbell Cable to the Sensor on the Barbell.
-- 27 -- Trouble-Shooting (con’t) Before performing the trouble shooting on this pa ge, go th ru the El ectri cal Service Inspection on the previous page. Symptom: Sensor Weight Bar locks prematurely during work out. Solution: 1. Perform Adjustments on Weight Bar / Cable-Knuckle assembly .
.
-- 29 -- Warranty & Contact Information Each P RO S POT fitness® Product comes with a lim ited parts repl acement warranty. Please refer to the actual warranty card include d with your system for specific coverage.
An important point after buying a device ProSpot Fitness HG-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProSpot Fitness HG-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProSpot Fitness HG-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProSpot Fitness HG-5 you will learn all the available features of the product, as well as information on its operation. The information that you get ProSpot Fitness HG-5 will certainly help you make a decision on the purchase.
If you already are a holder of ProSpot Fitness HG-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProSpot Fitness HG-5.
However, one of the most important roles played by the user manual is to help in solving problems with ProSpot Fitness HG-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProSpot Fitness HG-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
