Instruction/ maintenance manual of the product PFTL39007.0 ProForm
Go to page of 28
Serial Number Decal Model No. PFTL39007.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction .
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
4 2 0. Never leave the treadmill unattended while it i s running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.
5 T hank you for selecting the revolutionary PROFORM ® C ROSSWALK 300 treadmill. The CROSSWALK 300 treadmill offers an impressive array of features de- signed to make your workouts at home more enjoyable and e ffect ive.
ASSEMBL Y T o hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Ass embl y re quir es two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispos e of t he pac king mate rials until assem bly is compl eted.
7 2 . Remove the M10 Nut (33), the M10 x 50mm Bolt (27), and the shipping bracket (C) from the Base (85). Attach a Wheel (86) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket.
8 90 7 87 1 1 Large Hole Console Wire 22 Console Ground Wire 6. With the help of a second person, hold a Bolt Spacer (79) inside the lower end of the Left Upright (73). Insert an M10 x 96mm Bolt (5) with an M10 Star Washer (8) into the Left Upright and the Bolt Spacer.
9 8. Have a second person hold the console assem- b ly near the Right Upright (78). Remove th e wire tie from the Upright Wire (77) and console wire. Cut the plastic ties from the brackets on the Right Handrail (90) and Left Handrail (not shown). Connect the Upright Wire (77) to the console wire.
10 12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button.
13 HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to c old temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
14 5. Follow your progress with the displays. The lower left display — A s you exercise, the lower left display can show the elapsed time and the distance that you h ave walked or run. The l ower left display will also show the incline of the treadmill each time the incline level changes.
15 HOW TO USE A PRESET WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 . Select a preset workout. To select a preset work- out, press the Select Workout button repeat- edly until the number of the desired workout ap- pears in the upper dis- play.
16 THE INFORMATION MODE The console features an information mode that keeps t rack of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select a measurement system of miles or kilome- t ers, and turn on and off the display demo mode.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the pow er cord.
18 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Locate the Reed Switch (54) and the Magnet (42) on the left side of the Pulley (44). Turn the Pulley u ntil the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and t he Reed Switch is about 1/8 in. (3 mm). I f neces- sary, loosen the M4 x 19mm Screw (1), move the Reed Switch slightly, and then retighten the Screw.
20 PROBLEM: The walking belt is off-center or slips when walked on S OLUTION: a . I f the walking belt is off-center, f irst remove the key and UNPLUG THE POWER CORD.
21 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
22 P ART LIST—Model No. PFTL39007.0 R 1207A Key No. Qty. Description Key No. Qty. Description 1 16 M4 x 19mm Screw 2 4 M4 x 25mm Screw 3 1 M4.2 x 13mm Lift Frame Screw 4 4 1/4" x 3 1/2" Bo.
Key No. Qty. Description Key No. Qty. Description 1 01 1 Hex Key 102 1 Lift Frame/Base Ground Wire 1 03 2 Frame Endcap 104 2 Base Pad Spacer 105 1 4mm Hex Key 106 1 5mm Hex Key 107 1 Incline Stop Brac.
16 44 14 46 45 42 43 16 14 23 23 35 41 39 23 23 15 22 40 17 50 30 30 50 17 100 22 15 35 51 52 1 1 23 23 35 28 1 47 23 40 1 23 41 35 48 28 49 29 29 59 59 105 106 34 101 103 103 24 EXPLODED DRA WING A—Model No.
53 37 13 37 1 3 37 1 3 1 32 63 24 25 25 7 60 26 22 57 56 33 18 31 31 33 56 21 61 19 31 58 55 12 66 65 67 22 68 69 1 11 11 11 11 62 64 54 11 99 3 108 107 109 EXPLODED DRA WING B—Model No.
6 10 70 73 6 10 72 4 9 8 5 83 82 6 10 6 10 20 36 4 9 20 36 81 2 5 8 78 82 80 81 2 81 2 27 86 33 85 81 2 33 86 27 79 79 77 77 84 84 74 71 8 75 8 97 96 74 8 75 76 97 96 22 102 104 104 26 EXPLODED DRA WING C—Model No.
88 87 91 91 12 89 91 1 1 38 38 91 90 1 93 12 12 12 12 12 12 12 12 94 95 22 92 1 98 1 92 27 EXPLODED DRA WING D—Model No. PFTL39007.0 R 1207A.
Part No. 260584 R1207A Printed in China © 2007 ICON IP, Inc. LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for five (5) years.
An important point after buying a device ProForm PFTL39007.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm PFTL39007.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm PFTL39007.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm PFTL39007.0 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm PFTL39007.0 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm PFTL39007.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm PFTL39007.0.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm PFTL39007.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm PFTL39007.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
