Instruction/ maintenance manual of the product CrossWalk PFTL312040 ProForm
Go to page of 23
USER'S MANUAL Visit our website at www .proform.com new products, prizes, fitness tips, and much more! Model No. PFTL312040 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 The decals shown here have been placed on your treadmill. If a decal is missing or illegible, please call our Customer Service Department, toll-free, to order a free replacement decal (see the front cover of this manual). Apply the decal in the location shown.
5 Thank you for selecting the new PROFORM ® CROSS - WALK LX 470 treadmill. The CROSSWALK LX 470 treadmill offers an impressive array of features de- signed to make your workouts at home more enjoyable and e ffect ive.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 2. Identify the Right Upright (62), which has a large round hole near the lower end, and the Left Upright (9). See inset drawing 2a. Make sure that there are two U-Nuts (124) in the lower end of each Upright. Straighten the Wire Harness (21), and feed it into the lower end of the Right Upright (62) and out of the upper end.
8 46 96 Ties 47 5 5. Place the Console Base (46) on the Right Handrail (47) and the Left Handrail (not shown). Attach the Console Base with four 3/4” Screws (13) (only two Screws are shown). Do not tighten the Screws yet. Insert the Wire Harness (21) through the two indicated plastic ties on the Console Base (46).
9 10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.
10 THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 10). The reset/off circuit breaker, located on the treadmill frame near the power cord, should be in the reset position (see page 15).
12 To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time/Distance display. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 16).
13 HOW TO USE THE UPPER BODY ARMS As you walk on the treadmill, you can either hold the handrails or use the upper body arms. To exercise your arms, shoulders, and back for a total body workout, move the upper body arms forward and back as you walk on the treadmill.
14 HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the frame is se- curely held by the latch pin. 1. Hold the upper ends of the handrails. Place one foot on the base as shown.
15 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-533-1333, Monday through Friday, 6 a.
16 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
17 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
18 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
19 NOTES.
34 Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of the User’s Manual. REMOVE THIS EXPLODED DRA WING AND P ART LIST FROM THE MANUAL Save this EXPLODED DRA WING and P ART LIST for future reference.
P ART LIST—Model No. PFTL312040 R0904A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 1 Left Handrail 2 1 Key/Clip 3 2 Incline Leg Pivot Bolt 4 1 Cover 5 1 Left Foot Ra.
77 59 13 25 24 56 25 99 55 54 1 14 1 1 1 1 12 49 49 103* 1 41 35 13 8 58 57 70 89 104 126 14 13 62 9 2 46 25 33 43 44 45 50 48 48 39 51 23 81 25 73 61 63 15 69 68 67 93 5 74 84 83 39 83 39 66 7 48 16 .
Part No. 215427 R0904A Printed in USA © 2004 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-888-533-1333, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
An important point after buying a device ProForm CrossWalk PFTL312040 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm CrossWalk PFTL312040 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm CrossWalk PFTL312040 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm CrossWalk PFTL312040 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm CrossWalk PFTL312040 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm CrossWalk PFTL312040, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm CrossWalk PFTL312040.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm CrossWalk PFTL312040. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm CrossWalk PFTL312040 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
