Instruction/ maintenance manual of the product CROSSWALK CALIBER ELITE PFTL71505.2 ProForm
Go to page of 30
Model No. PFTL71505.2 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction .
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
4 20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off cir- c uit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.
5 T hank you for selecting the new PROFORM ® C ROSS- W ALK CALIBER ELITE treadmill. The CROSSWALK CALIBER ELITE treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective.
ASSEMBL Y To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed.
7 2 . Attach a Wheel (66) to the base of the Uprights (69) with a Wheel Bolt (64) and a Nut (13) as shown. Do not overtighten the Wheel Bolt; the Wheel should turn freely. With the help of a second person, carefully tip the tread- mill onto its other side.
8 Small Hole 71 6. Hold the Console Base (47) near the Left Handrail (71). Attach the ends of the ground wires on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wires 6 42 7. Touch the Right Handrail (72) to discharge any static.
9 42 36 2 47 9. Cover the Upright Wire (42) with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten two 1/2" Screws (48) and a 3/4" Screw (2) into the Right Grip Plate and the Console Base (47).
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make each workout more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button.
12 HOW TO TURN ON THE POWER I MPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- p erature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
13 The upper left corner of the display will show t he approximate num- ber of calories you h ave burned during your workout. Note: When the calorie goal program is selected, the dis- play will show the number of calories still to be burned.
14 HOW TO USE A SPEED & INCLINE PROGRAM 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. 2. Select a speed & incline program. To select a speed & in- cline program, press the Program button repeat- edly until “P–1” or “P–2” appears in the display.
15 HOW TO USE A DISTANCE PROGRAM 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. 2. Select a distance program. To select a distance program, press the Program button repeat- edly until “P–3” or “P–4” appears in the display.
16 HOW TO USE THE CALORIE GOAL PROGRAM 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. 2. Enter your weight if desired. See step 2 on page 12. 3. Select the calorie goal program. To select the calorie goal program, press the Program button repeat- edly until a goal of 50 calories and the words “SET CALS.
17 HOW TO CONNECT THE TREADMILL TO USE IFIT.COM PROGRAMS T o use iFIT.com MP3 or CD programs , the treadmill must be connected to your MP3 player, CD player, portable stereo, home stereo, or computer. See pages 17 and 18 for connecting instructions. To use iFIT.
18 HOW TO CONNECT YOUR HOME STEREO N ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b eing used, see instruction B. A. Plug one end of a long 1/8" to RCA stereo audio cable (available at electronics stores) into the input jack on the console.
19 HOW TO CONNECT YOUR VCR N ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18.
20 If the speed or incline settings are too high or too low, you can manually override the settings at any t ime by pressing the Speed or Incline buttons on the console; however, when the next “chirp” is h eard, the speed and/or incline will change to the next settings of the program.
21 HOW TO USE AN IFIT.COM PROGRAM DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are s oon to be available. See www.iFIT.com for details.
22 THE INFORMATION MODE T he console features an information mode that keeps track of treadmill usage information and allows you to s elect a system of measurement. To select the information mode, inser t the key into the conso le while holding down the Stop button, and then relea se th e Sto p butt on.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Then, pivot the frame down until it is past the latch pin. Slowly release the latch knob. 2. Hold the metal frame firmly with both hands , and lower the frame to the floor.
25 PROBLEM: The power turns off during use S OLUTION: a . Check the circuit breaker located on the treadmill frame near the power cord (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.
26 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
27 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
P ART LIST—Model No. PFTL71505.2 R 0108A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 32 3/4" Screw 3 1 Motor Belt 4 2 Motor Tension Bolt 5 1 Right G.
EXPLODED DRA WING—Model No. PFTL71505.2 R0108A 120 121 2 2 2 48 48 29633.1 42 70 62 48 72 2 29 80 48 2 2 10 58 12 19 13 13 60 23 13 12 14 98 18 17 14 15 82 83 97 32 96 86 32 23 52 23 81 58 83 82 58 .
Part No. 240667 R0108A Printed in USA © 2008 ICON IP, Inc. LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material under normal use and service conditions. The drive motor is warranted for ten (10) years after the date of purchase.
An important point after buying a device ProForm CROSSWALK CALIBER ELITE PFTL71505.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm CROSSWALK CALIBER ELITE PFTL71505.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm CROSSWALK CALIBER ELITE PFTL71505.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm CROSSWALK CALIBER ELITE PFTL71505.2 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm CROSSWALK CALIBER ELITE PFTL71505.2 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm CROSSWALK CALIBER ELITE PFTL71505.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm CROSSWALK CALIBER ELITE PFTL71505.2.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm CROSSWALK CALIBER ELITE PFTL71505.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm CROSSWALK CALIBER ELITE PFTL71505.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center