Instruction/ maintenance manual of the product CR 610 PFTL55810 ProForm
Go to page of 26
USER'S MANUAL Visit our website at www .proform.com new products, prizes, fitness tips, and much more! Patent Pending CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it.
21. Inspect and tighten all parts of the treadmill regularly. 22. Never insert or drop any object into any opening. 23. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual.
Thank you for selecting the revolutionary PROFORM ® CR 610 treadmill. The CR 610 treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve- nience and privacy of your home.
ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw- driver and rubber mallet . Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
5 5. Make sure that the front edge of the Left Foam Grip (110) is under the Console Base (87) as shown. Tighten a Small Screw (76) into the side of the Left Foam Grip as shown. Note: You may need to pull on the side of the Left Foam Grip to align the Small Screw with the hole in the Upright (82).
8 6. Hold the treadmill firmly with both hands, and raise the treadmill to the storage position as described on page 15. If the latch pin does not align with the hole in the Catch (not shown), it will be necessary to remove the Latch Spacer (56). Remove the two Screws (101), the Latch Assembly (9), and the Latch Spacer.
9 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
10 CONSOLE DIAGRAM Clip Key Displays Displays Manual/Program Indicators Speed Buttons LED Track Note: If there is a thin sheet of clear plastic on the face of the console, remove it. FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features to help you get the most from your exercise.
HOW TO USE THE MANUAL MODE Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select the manual mode. When the key is in- serted, the manual mode will automatically be selected and the manual control indica- tor will light.
12 The console can display speed and distance in ei- ther miles or kilometers. To change the unit of measurement, hold down the STOP button while inserting the key into the console. An “E,” for English miles, or an “M,” for metric kilometers, will appear in the SPEED/MIN-MILE display.
HOW TO USE PERSONAL TRAINER PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the personal trainer programs.
14 INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour.
15 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged.
16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin. Slowly release the latch knob.
17 TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
18 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.
19 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
20 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
21 NOTES.
22 P ART LIST—Model No. PFTL55810 R0801A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No.
23 103 2 Extension Leg 104 2 Base Endcap 105 1 Shock 106 1 Choke 107 2 Pulse Bar Bolt 108 2 Pulse Bar Washer 109 1 Pulse Bar 110 1 Foam Grip (Left) 111 1 Trim Guard 112 1 Shield 113 1 Small Bolt 114* .
17 52 106 16 16 49 24 89 70 100 11 2 72 69 45 46 45 46 5 7 11 3 15 98 120 84 6 80 46 80 46 102 41 27 28 29 30 26 18 30 11 5 19 30 14 15 35 32 33 15 31 38 39 15 11 5 30 18 30 22 21 3 1 3 4* 2 39 40 92 .
107 109 87 77 11 7 11 7 86 15 86 15 11 0 76 89 89 46 46 11 6 50 89 46 46 46 103 30 97 101 96 97 101 83 83 82 101 16 101 94 101 91 99 62 72 105 16 34 20 108 107 85 76 90 76 10** 79 79 1 18** 101 11 9 101 11 9 95 103 95 1 14* 1 14* 104 104 97 101 97 101 9 78 48 85 111 76 76 108 20 56 101 EXPLODED DRA WING—Model No.
Part No. 174882 R0801A Printed in USA © 2001 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
An important point after buying a device ProForm CR 610 PFTL55810 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm CR 610 PFTL55810 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm CR 610 PFTL55810 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm CR 610 PFTL55810 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm CR 610 PFTL55810 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm CR 610 PFTL55810, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm CR 610 PFTL55810.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm CR 610 PFTL55810. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm CR 610 PFTL55810 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
