Instruction/ maintenance manual of the product 835QT 831.299484 ProForm
Go to page of 30
USER'S MANUAL ® CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 831.299484 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it.
21. When using iFIT.com CD’s and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.
Thank you for selecting the revolutionary PROFORM ® 835QT treadmill. The 835QT treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve- nience and privacy of your home.
6 ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw- driver and rubber mallet . Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 23). To protect the floor or carpet from damage, place a mat under the treadmill.
8 2b B 116 PULSE Jack If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the receiver in - cluded with the chest pulse sensor. 1. Make sure that the power plug is unplugged. Remove the six or seven indicated Screws (46) from the back of the Console Base (116).
9 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
10 Note: If there is a thin sheet of clear plastic on the face of the console, remove it. FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features to help you get the most from your exercise. When the console is in the manual mode, the speed and incline of the treadmill can be controlled with a touch of a button.
11 HOW TO TURN ON THE POWER Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 9). Locate the on/off switch on the front of the treadmill. Make sure the on/off switch is in the on position. Stand on the foot rails of the treadmill. Find the clip attached to the key, and slide the clip securely onto the waist- band of your clothing.
12 TIME display —When the manual mode or an iFIT.com program is selected, this display shows the elapsed time. When a personal trainer program is selected, this display shows both the time remaining in the program and the time re- maining in the current segment of the program.
13 HOW TO USE PERSONAL TRAINER PROGRAMS Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the personal trainer programs. When the key is in- serted, the manual mode will be selected and the MAN- UAL indica- tor will light.
14 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CD’s , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 14 and 15 for connecting instructions.
15 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
16 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 15.
17 During the CD or video program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change.
18 HOW TO USE PROGRAMS DIRECTLY FROM OUR INTERNET SITE Our new internet site at www.iFIT.com allows you to access a large selection of programs that interactively control your treadmill to help you achieve your specific exercise goals. In addition, you can play iFIT.
19 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour.
20 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin. Slowly release the latch knob.
22 TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
23 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
24 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. Remember—these are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
25 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
26 NOTES.
P ART LIST—Model No. 831.299484 R0301A 1 1 Motor Belt 2 1 Pulley/Flywheel/Fan 3 4 Motor Nut 4* 1 Motor/Pulley/ Flywheel/Fan 5 1 Incline Motor Bolt 6 1 Console Ground Wirer 7 1 Incline Motor 8 1 Stop.
17 52 106 16 16 49 24 89 70 100 122 8 7 15 5 41 27 28 29 69 26 30 15 19 30 14 15 35 36 32 33 15 31 38 39 15 15 76 18 30 22 21 3 1 3 4* 2 39 40 92 33 43 42 32 68 44 45 46 41 71 55 68 44 101 101 47 45 4.
108 107 109 87 77 89 89 46 46 11 6 50 11 7 11 7 89 20 86 15 86 15 Kirk Niebergall PRODUCT LIT. GROUP 89 9 103 30 97 101 96 97 101 83 83 82 11 3 16 11 3 94 101 91 99 69 72 105 16 34 23 80 73 20 11 0 10.
Part No. 173703 R0301A Printed in USA © 2001 Sears, Roebuck and Co. The model number and serial number of your PROFORM ® 835QT treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
An important point after buying a device ProForm 835QT 831.299484 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm 835QT 831.299484 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm 835QT 831.299484 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm 835QT 831.299484 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm 835QT 831.299484 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm 835QT 831.299484, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm 835QT 831.299484.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm 835QT 831.299484. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm 835QT 831.299484 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
