Instruction/ maintenance manual of the product 831.295032 ProForm
Go to page of 22
Model No. 831.295032 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 21. When folding or moving the treadmill, make sure that the storage latch is fully closed. 2 2. Inspect and properly tighten all parts of the treadmill regularly.
5 T hank you for selecting the new PROFORM ® C ROSS- W ALK 365s treadmill. The CROSSWALK 365s treadmill combines advanced technology with innovative design to help you get the most from your exercise in the con- venience of your home.
6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 2 . With the help of another person, carefully lower the Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs (63) as you tip the Uprights. Make sure that the Extension Legs remain i n the Uprights. Attach each Extension Leg (63) with two 1” Tek Screws (39) and a Round Base Pad (57) as shown.
8 Small Hole 71 6. Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wire 42 7. Touch the Right Handrail (72) to discharge any static.
9 11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 10). In addition, make sure that the reset/off circuit breaker, located on the treadmill frame near the power cord, is in the reset position.
12 To stop the walking belt, press the Stop button. The Time/Distance display will begin to flash. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 16). C hange the incline of the treadmill as desired.
13 HOW TO USE THE UPPER BODY ARMS A s you walk on the treadmill, you can either hold the handrails or use the upper body arms. To exercise your arms, shoulders, a nd back for a total body workout, move the upper body arms forward and back as you walk on the treadmill.
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor.
16 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY-HOME ® ( 1-800-469-4663). PROBLEM: The power does not turn on SOLUTION: a.
17 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
19 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LIST—Model No. 831.295032 R1104A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 16 3/4” Screw 3 1 Motor Belt 4 1 Motor Tension Bolt 5 4 3/8” Washe.
106 105 104 107 108 63 65 62 72 1 16 2 2 2 31 48 48 2 29 44 1 16 10 58 12 19 13 13 60 23 13 12 14 21 98 18 17 14 15 74 98 82 83 97 15 96 86 15 95 92 38 92 38 93 81 58 83 82 58 79 80 39 69 39 13 53 57 .
Part No. 218752 R1104A Printed in Canada © 2004 Sears, Roebuck and Co. FULL 90 DA Y W ARRANTY For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this.
An important point after buying a device ProForm 831.295032 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm 831.295032 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm 831.295032 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm 831.295032 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm 831.295032 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm 831.295032, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm 831.295032.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm 831.295032. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm 831.295032 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
