Instruction/ maintenance manual of the product 831.24813.0 ProForm
Go to page of 28
Model No. 831.24813.0 Serial No. Write the serial number in the space above for future reference. Serial Numl Decal • Assembly • Operation • Maintenance • Part List and Drawing TR A ILL User's SE Manual Sears, Roebuck and Co.
TABLE OF CONTENTS WARNING DECAL PLACEMENT .............................................................. 2 IMPORTANT PRECAUTIONS ................................................................ 3 BEFORE YOU BEGIN ......................................
iMPORTANT PRECAUTIONS WARNING: To reduce the .sk of se.ous niury, read a, important precautions and structions in this manual and all warnings on your treadmill before using your treadmill. Sears as= sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
20. Never leave the treadmill unattended while it 24. is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ® CROSSWALK SPORT treadmill. The CROSSWALK SPORT treadmill offers an impressive array of features designed to make your workouts at home more enjoy- able and effective.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials, Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
2. 2 Remove theM10 Nut (33), the M10 x 50mm Bolt (27), and theshipping bracket (C) from the Base (85). Attach a Wheel (86) with the Bolt and the Nut that you just removed. Do not overtighten the Nut;the Wheel mustturn freely. Discard the shipping bracket.
5. 5 With the help of a second person, carefully tip the treadmill ontoitsright side. Partially fold the Frame (48) so thetreadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B).
. Have a second person hold the console assem- bly near the Right Upright (78). Cut the plastic ties from the brackets on the Right Handrail (90) and Left Handrail (not shown). Press the Cage Nuts (38) back into place if necessary. Connect the Upright Wire (77) to the console wire.
10. Press the Latch Insert (70) into the Left Upright (73). It may be necessary to tap on the Latch Insert with a rubber mallet. Locate the Latch Pin Assembly (72). Remove the knob from the pin. Make sure that the collar and the spring are on the pin.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
CONSOLEDIAGRAM PLATEAU "_ 1 ROLLING HILLS _2 PARK TRAIL _3 _ _._'t CUST0 M-F'T W0 RKOUTS _ 5 _ ROLLING PLATEAU 6 _ SELECT WORKOUT I V SET _ I TIME 2 STOP I 10 _ MPH ÷ INCLINE Key i FEATURES OFTHECONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable.
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE iMPORTANT: if the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power, if you do not do this, you may damage the console displays or other electrical components.
5. Follow your progress with the displays. 6. Measure your heart rate if desired. The lower left display-- As you exercise, the lower left display can show the elapsed time and the distance that you have walked or run. The lower left display will also show the incline of the treadmill each time the incline level changes.
HOW TO USE A PRESET WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2. Select a preset workout. To select a preset work- out, press the Select Workout button repeat- edly until the number of the desired workout ap- pears in the upper dis- H play.
THE iNFORMATiON MODE HOW TO USE THE CROSSWALK ARMS The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position, if you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the back cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Locate the Reed Switch (54) and the Magnet (42) on the left side of the Pulley (44). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in.
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
EXERCISE GUiDELiNES , WARNING: Before beginning this or any exercise program, consult your physi- cian. This is especially important for persons over age 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings.
PART LISTmModel No. 831.24813.0 R0809A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No.
Key No. Qty. Description Key No. Qty. Description 101 1 Hex Key 108 1 Incline Stop Bracket 102 1 Lift Frame/Base Ground Wire * - 8" Blue Wire, 2F 103 2 Frame Cap * - 6" Blue Wire, M/F 104 2 .
EXPLODED DRAWING AmModel No. 831.24813.0 R0809A LO 09 O0 OJ 03 OJ 03 OJ 03 OJ LO OJ 24.
EXPLODED DRAWING BmModel No. 831.24813.0 ROSOgA 53 26 99 11 11 60 19 11 .ql g2-37 62 25.
EXPLODED DRAWING CmModel No. 831.24813.0 ROSOgA 10 70 72 5 8 86 83 85 77 10 6 96 8 8 5 26.
EXPLODED DRAWING D--Model No. 831.24813.0 RosogA 87 89 88 93 12 22 91 90 38 91 27.
iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiiiiii iiiiiiiiiiiii.
An important point after buying a device ProForm 831.24813.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm 831.24813.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm 831.24813.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm 831.24813.0 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm 831.24813.0 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm 831.24813.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm 831.24813.0.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm 831.24813.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm 831.24813.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
