Instruction/ maintenance manual of the product 1150i PFTL13540 ProForm
Go to page of 30
Serial Number Decal Model No. PFTL13540 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call our Customer Service Department, toll-free, to order a free re- placement decal (see the front cover of this manual). Apply the decal in the location shown.
Thank you for selecting the revolutionary PROFORM ® 1150i treadmill. The 1150i treadmill combines advanced technology with innovative design to help you get the most from your exercise program in the convenience and privacy of your home.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
5. Set the Console Base (101) on the Uprights (80, 84). Be careful not to pinch the Wires (not shown) in the Uprights. Attach the Console Base to each Upright with two Console Bolts (76) and two Internal Star Washers (77); start all four Console Bolts before tightening any of them.
If you purchase the optional chest pulse sensor (see page 20), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated Screw (108) and the Access Door (122).
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
9 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features that help you get the most from your workouts. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with a touch of a button.
10 HOW TO TURN ON THE POWER Plug in the power cord (see page 8). Locate the reset/off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 9) and slide the clip onto the waistband of your clothes.
11 To change the unit of measurement, first hold down the Stop button while inserting the key into the console. An “ E ” for English miles or an “ M ” for metric kilometers will appear in the Speed display. Press the Speed ▲ ▲ button to change the unit of measurement.
12 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the preset programs. When the key is inserted, the manual mode will be se- lected. To se - lect a preset program, press the Program Select button repeatedly until one of the six preset program indicators lights.
13 To stop the program temporarily, press the Stop button. The Time/Pace display will begin to flash. To restart the program, press the Start bu tto n or the Speed ▲ ▲ button. To end the program, press the Stop button, remove the key, and then reinsert the key.
14 During heart rate pro- grams, the matrix will show a graphic that represents your heart rate. Each time a heart- beat is detected, an ad- ditional peak will ap- pear. Enter your age and a maximum speed setting. When a heart rate pro- gram is selected, the word “ AGE ” and the current age setting will flash in the Calories/ Pulse display.
15 HOW TO USE IFIT.COM CD PROGRAMS When you use an iFIT.com CD program, a certified personal trainer will guide you through your workout as the program interactively controls the speed and in- cline of the treadmill. Note: To purchase iFIT.com CDs, call toll-free 1-800-735-0768.
16 Follow your progress with the track and the displays. See step 5 on page 10. Measure your heart rate if desired. See step 6 on page 11. Turn on the fans if desired. See step 7 on page 11. When the program is completed, remove the key. See step 7 on page 13.
17 HOW TO CONNECT THE TREADMILL TO YOUR VCR OR COMPUTER HOW TO CONNECT THE TREADMILL TO YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B.
18 HOW TO USE IFIT.COM VIDEO PROGRAMS To use iFIT.com videocassettes, the treadmill must be connected to your VCR. See HOW TO CONNECT THE TREADMILL TO YOUR VCR on page 17. Note: To purchase iFIT.com videocassettes, call toll-free 1-800-735-0768. Follow the steps below to use an iFIT.
19 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT THE TREADMILL TO YOUR COMPUTER on page 17. In addition, you must have an internet connection and an internet service provider.
20 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
With the help of a second person, carefully raise the Upright Base (97) as shown. Carefully pivot the Hood (123) off. Locate the Reed Switch (22) and the Magnet (19) on the left side of the Pulley (18). Turn the Pulley until the Magnet is aligned with the Reed Switch.
24 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
25 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch — never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LIST — Model No. PFTL13540 R0903A Key No. Qty. Description Key No. Qty. Description 1 1 Left Foot Rail 2 12 Foot Rail Screw 3 2 Isolator Bolt (Top) 4 2 Isolator Decal 5 2 Isolator Top Cap 6 2 .
27 1/4 ” W asher (39) – 4 Internal Star W asher (77) – 4 Console Bolt (76) – 4 1 ” T ek Screw (40) – 2 Extension Leg Bolt (96) – 4 Latch Screw (56) – 2 Use the drawings below to identify small parts used during assembly.
2 4 3 2 9 2 1 10 11 12 42 11 15 14 69 13 16 17 18 19 4 3 2 2 2 16 63 62 39 66 68 52 65 64 62 39 52 60 11 11 10 9 14 15 59 67 42 17 20 20 38 21 37 38 36 33 103 20 20 23 20 21 22 24 25 26 31 30 27 29 28.
11 2 11 3 86 84 56 82 88 79 97 89* 90 94 20 91 92 95 96 89* 20 94 90 91 92 95 96 87 85 86 80 79 88 81 76 85 108 108 77 71 99 40 87 100 25 20 20 25 75 103 87 87 99 40 104 108 106 108 107 11 7 120 11 6 .
Part No. 205297 R0903A Printed in USA © 2003 ICON Health & Fitness, Inc. LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions.
An important point after buying a device ProForm 1150i PFTL13540 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm 1150i PFTL13540 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm 1150i PFTL13540 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm 1150i PFTL13540 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm 1150i PFTL13540 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm 1150i PFTL13540, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm 1150i PFTL13540.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm 1150i PFTL13540. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm 1150i PFTL13540 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
