Instruction/ maintenance manual of the product MP6600 Profile
Go to page of 24
AM/FM HIGH POWER SLIDE DOWN DETACHABLE FACE MP3 / COMPACT DISC PLAYER Installation Instructions / Owner's Man ual MP6600 CD-R/RW 60W x 4.
1.
I NTRODUCTION Congratulations on your purchase of a Profile state-of-the-art single disc CD/MP3 player. Your selection of a Profile car audio product indicates a true appreciation of fine musical reproduction.
S AFETY PRECAUTIONS Secure the CD/MP3 player . When installing your CD/MP3 player in the vehicle, make sure it is mounted properly in the dash, using an after market installation kit if needed. When using the supplied mounting bracket, it is a must that you also use the supplied back brace to support the back of the CD/MP3 player.
C ARE AND MAINTENANCE Cleaning the CD/MP3 player . When cleaning the vehicle, be sure not to get any water in or on the CD/MP3 player. Clean only the exterior surface of the unit with a dry, clean soft towel using no chemical solvents. Operating in extreme temperatures Sometimes the unit will not operate in extreme, hot or cold temperatures.
E LECTRICAL AND SIGNAL CONNECTIONS Before making the following connections, take time to look over the vehicle’s wiring and determine the location and wires you will be connecting to.
6 TWO SPEAKER SYSTEM CAUTION! Tape unused wires so they do not short against other wires or chassis ground. RED RED VIOLET VIOLET CONSTANT +12V SWITCHED +12V (ON WITH IGNITION) +12V REMOTE OUTPUT FOR .
7 M OUNTING THE CD/MP3 PLAYER There are two different ways to mount the CD / MP3 Player. In most Japanese vehicles you can use the factory mounting brackets, taking advantage of the ISO/DIN opening. If your vehicle does not have ISO/DIN opening, you can mount the CD/MP3 Player using the supplied DIN sleeve and rear support bracket.
8 Attach the back brace to the CD/MP3 player using the supplied hardware. Then attach the other end of the brace to a firm mounting surface (i.e. Dash brace, fire wall, e.t.c.) This will brace the back of the CD/MP3 player to ensure solid mounting to prevent theft and provide optimal CD play.
9 ISO/DIN MOUNTING If you own a Japanese vehicle, you can use the mounting screw holes on the side of the CD/MP3 player to attach to the factory mounting brackets. ! Detach the removable face of the MP6600 by depressing the release button ! Remove the outside trim ring by gently pulling at both outer edges (See page 10).
R EMOVING THE CD PLAYER Remove the CD/MP3 player’s trim ring by applying pressure with your finger tips, then gently pull out away from the dash. In order to remove the CD/MP3 player you will first need to release and detach the front panel. Insert the provided removal key into the opening on the top left side of the CD/MP3 player.
O PERATING THE SLIDE DOWN FACE PUSH RELEASE BUTTON TO SLIDE DOWN THE FRONT PANEL. THE FRONT PANEL WILL DOWN AUTOMATICALLY. SLIDE TO CLOSE PANEL, PUSH IN AND UP ON THE LOWER RIGHT EDGE 11.
CD-R/RW 60W x 4 L OCATION AND FUNCTION OF CONTROLS POWER - Press the power button once to turn the CD/MP3 player on. Press the power button again to turn the CD Player off. DISC PLAY - Gently insert the compact disc with the label side facing up into the slot.
13 DISPLAY / CLOCK ADJUSTMENT - Press this button , the LCD will display the clock for about 2 seconds, then return to the previous display mode. For clock adjustment, press and hold the “DISP” button until the display flashes. Press the tuning up button to adjust the hours.
14 TUNING CONTROLS - Use the up and down buttons to make the following adjustments SELECT STATIONS - Press and immediately release a tune button or to move a radio frequency number down or up one step. Press and hold a tune button or for several seconds to seek to the next clear station.
SCAN - Press the “SCAN” to search for radio stations. PAUSE - Press the “PAUSE” button to stop CD play. Press again to resume normal play. FACE PLATE RELEASE - Press the release button to remove the face plate .
T HE MP3 FUNCTIONS LOADING THE MP3 DISC Load the Disc as usual, once loaded the MP3 disc will show “MP3 T01” on the display then the message “reading”.
DIRECTORY OR TRACK NAME ACCESS. Under MP3 play mode, press the “AMS/MU” (menu) twice and the display will show “*”. Enter the name of directory or track .
18 T ROUBLE SHOOTING THE SYSTEM The following chart will help in solving most problems that may occur. Should any problem persist after you have made these checks, please consult your nearest Profile retailer. Before going through this check list, refer back to the wiring and operating procedures.
19 SYMPTOM CAUSE SOLUTION The installation angle is greater than 30 degrees Adjust the angle of the unit to l ess than 30 degrees The disc player is installed incorrectly Check to see if the unit is fastened securely with the back brace supporting the rear of the unit.
S PECIFICATIONS GENERAL P o w e r S u p p l y R e q u i r e m e n t s...........................................D C 1 2 V o l t s , N e g a t i v e G r o u n d C h a s s i s D i m e n s i o n s ( m m ) ................................................1 7 8 ( W ) x 1 6 2 ( D ) x 5 0 ( H ) T o n e C o n t r o l s.
LIMITED WARRANTY Profile Consumer Electronics, Inc. warrants this product to be free from defects in material and workmanship for a period of One (1) Year from the date of sale to the original consumer purchaser.
WARRANTY REPAIR POLICY In the unlikely event of product failure, the following procedures should be followed 1) The unit must be under the 1-year warranty period. 2) The unit must have no physical damage. 3) A copy of the original proof of purchase must be sent with the unit.
2002 PROFILE CONSUMER ELECTRONICS MP6600 MANUAL REV 12.12.02 100000 - 121202 PROFILE CONSUMER ELECTRONICS, INC. 15060 SHOEMAKER AVE SANTA FE SPRINGS, CA 90670 TEL: (562)404-9393 FAX: (562)404-9433 WWW.
An important point after buying a device Profile MP6600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Profile MP6600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Profile MP6600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Profile MP6600 you will learn all the available features of the product, as well as information on its operation. The information that you get Profile MP6600 will certainly help you make a decision on the purchase.
If you already are a holder of Profile MP6600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Profile MP6600.
However, one of the most important roles played by the user manual is to help in solving problems with Profile MP6600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Profile MP6600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
