Instruction/ maintenance manual of the product Xpression III Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject 1 X pression III.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 2 1 1.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 3 PRO-JECT 1 X pression III Controls, features and connections 1 Motor transportation screw (marked red) 2.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 4 Set-up Make sure the surface yo u wish to u se the turntable on is level (use a spirit leve l) before placing t he turntable on it. Fit the drive belt (3) around the hub (4) and the smaller diameter part of the motor pulley (2).
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 5 Anti-skating force adjustment The anti-skating force must be adjusted according to the mass of the cartr.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 6 Maintenance and cleaning Your record player requires little or no regular maintena nce.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 7 Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory.
© Audio Trade GmbH · Pro-Ject 1 X pression II I / Ortofon 2M Red · Revision 1.6.08/1.7. 08 8 T omearm transport look 2 motor transport screws (marked red) Lid Platter Accessories T onearm counterwe.
An important point after buying a device Pro-Ject Xpression III (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject Xpression III yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject Xpression III - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject Xpression III you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject Xpression III will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject Xpression III, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject Xpression III.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject Xpression III. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject Xpression III along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
