Instruction/ maintenance manual of the product RPM 9.2 Evolution Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject RPM 9.2 Evolution.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 2 16 21 9 7 6a 15 6 18 8 9a 17 14 14 14.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 3 Pro-Ject RPM 9.2 Evolution Controls, features and connections 1 Separate motor unit (motor and motor base) * 2 Stepped drive p.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 4 Set-up The deck is supplied partially disassembled and carefully packaged for safe transport. Carefully remove all parts from the transport packaging. Screw the magnetic field feet (22) onto the threaded bo lts located on the underside of the plinth.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 5 Adjusting the vertical tracking angle (vta) Put a record and the record weight on the platter. W hen the needle is lowered into the record groove and the tonearm is not resting on the lift arm, the tube of the to nearm should be parallel to the surface of the record.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 6 Mains power connection The turntable is supplied with a power supply suitable fo r your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 7 Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory.
© Audio Trade GmbH · Pro-Ject RPM 9.2 Evolution · Re vision 2012.7.1 8 Accessories P ower supply Record weight Motor Motor base T onearm counterweight Platter T onearm transport lock Please remove .
An important point after buying a device Pro-Ject RPM 9.2 Evolution (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject RPM 9.2 Evolution yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject RPM 9.2 Evolution - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject RPM 9.2 Evolution you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject RPM 9.2 Evolution will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject RPM 9.2 Evolution, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject RPM 9.2 Evolution.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject RPM 9.2 Evolution. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject RPM 9.2 Evolution along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
