Instruction/ maintenance manual of the product 4935G SERIES Acer
Go to page of 242
Aspire 4935/4935G Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the up dates made on Aspire 4935/4935G Series se rvice guid e. Date Chapter Up date s.
III Copyright Copyright © 2008 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a.
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rma tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGUR A TION decided for Acer's global product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Main Unit Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Removing the Hinge Cove rs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Removing the Switch Cover .
IX T able of Contents Troubleshooting 145 Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 Power On Issue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many feature: NOTE: Items marked with * d enote only selected mode ls.
2 Chapter 1 Communication • Acer Video Confer ence, featurin g: • Integrated Acer Crystal Eye webcam* • Acer PureZone technology* • Optional Acer Xpress V oIP phone* • WLAN: • Intel® Wireless WiFi Lin k 5100/5300* • Wi-Fi®/WiMAX™: • Intel® Wireless WiFi Lin k 5150/5350* • WP AN: Bluetooth® 2.
Chapter 1 3 • Headphones/speaker/line-out jack with S/PDIF support* • Microphone-in jack • Line-in jack • Ethernet (RJ-45) port • Modem (RJ-1 1) port • DC-in jack for AC adapter Environmen.
4 Chapter 1 System Block Diagram Pow er On /Off CK T. Touch Pad CRT Conn. LPC BUS uFCBGA-1329 H_A#( 3.. 35) H_D#(0..63) MDC 1.5 Conn Int.KB D PCI-Expr ess BANK 0, 1, 2, 3 USB conn x3 667/800/1066MH z ALC888S-VC DMI DC/DC Int erface CKT. Intel P enryn P rocessor 3 .
Chapter 1 5 Your Acer Notebook tour After knowing your computer features, le t us show you around you r new computer . Front View No. Icon Item Description 1 Acer Crystal Eye webcam Web camera for video communication (only for certain models). 2 Microphone Internal microphone for sound recording.
6 Chapter 1 Closed Front View 8 S tatus indicators Light-Emitting Diodes (LEDs) that light up to show the status of th e computer's functions and components. 9 Click buttons (left, center* an d right) The left and right buttons function like the left and right mouse buttons.
Chapter 1 7 Left View No. Icon Item Description 1 DC in jack Connects to an AC adap ter 2 Ethernet (RJ-45) port Connects to an Ethernet 10/100/1000-based network. 3 External display (VGA) port Connects to a display device (e.g. external monitor , LCD projector).
8 Chapter 1 Right View Rear View No. Icon Item Description 1 USB 2.0 port Connect to USB 2.0 devices (e.g. USB mouse, USB camera). 2 Optical drive Internal optical drive; accepts CDs or DVDs. 3 Optical disk access indicator Lights up when the optical drive is active.
Chapter 1 9 Bottom View No. Icon Item Description 1 Battery bay Houses the computer's battery pack. 2 Battery release latch Releases the battery for removal. 3 Hard disk bay Houses the computer's hard disk (secured with screws). 4 Memory compartment Houses the computer's main memory .
10 Chapter 1 Indicators The computer has several easy-to-read status indicators: The front panel ind icators are visible e ven when the compute r cover is closed. NOTE: 1. Charging: The b at te r y l ig ht shows am be r w hen the battery is charging. 2.
Chapter 1 11 Touchpad Basics (with fingerprint reader) The following items show you how to use the to uchp ad with Acer Bio- Protection fingerprint reader: • Move your finger across the touchpad (1) to move the cursor . • Press the left (2) and right (4) b uttons locat ed beneath the touchpad to perform selecti on and execution functions.
12 Chapter 1 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, fun ction and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can to ggle on and off.
Chapter 1 13 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
14 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
Chapter 1 15 Special Key Y ou can locate the Euro symbol and the US dollar si gn at the upper-center an d/or bottom-right of your keyboard. The Euro symbol 1. Open a text editor or word processor. 2. Hold <Alt Gr> and the n press the <5> key at the upper-center of the keyboard .
16 Chapter 1 Using the System Utilities Acer Bio-Protection (only for certain models) Acer Bi o-Protection Fi ngerprint Solu tion is a multi-purpose fingerprint software package integrated with the Micr osoft Windows ope rating system.
Chapter 1 17 Double (vertical), T riple (primary at left), T riple (pri mary at right), or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently . Acer Gridvista is dual-display compatible, allo win g two displays to be partitioned independently .
18 Chapter 1 Hardware Specifications and Configurations Processor Processor Specifications System Board Major Chips Item Specification CPU T ype Intel Mobile Penryn uPGA, Socket P , 6M L2, FSB 800/106.
Chapter 1 19 Audio Codec REAL TEK ALC888S-VC for High Definition Audio Codec with Dolby Dig ital Live Item Specificati ons.
20 Chapter 1 CPU Fan T rue V alue T able • Throttling 50%: On =100 °C; Off=90°C • OS Shut down: 105°C • H/W Shut down: 96°C BIOS ROM CPU T emperature ( ° C) Fa n S peed (rpm) SPL Spec (dBA) Core1 Core 2 50 50 - - 66 66 3200 31 74 74 3500 34 85 85 3900 37 100 100 4300 40 Item Specification BIOS V endor Insyde H20 BIOS V ersion V0.
Chapter 1 21 System Memory Memory Combinations NOTE: Above table lists s ome system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 co uld be reversed.
22 Chapter 1 Hard Disk Drive Interface Item Specification s V endo r & Model Name Seagate ST9250827AS Seagat e ST9320320AS ST9160310AS Seagate ST9500325AS To s h i b a MK3252GSX MK2552GSX MK1652GS.
Chapter 1 23 Super-Multi Combo Module Item Specification V end or & model name Philip s DS-8A2S, T oshiba Digi/TS-L633A Performance S pecific ation With CD Diske tt e With DVD D is k et te T ransfer rate (MB/sec) Sustained: Max 3.
24 Chapter 1 Super-Multi Combo Mo dule (continued) Item Specification V endor & model name HLDS G T 10N Sony AD7580S Performance S pecification With CD Diskette With DVD Diskette With CD Diskette With DVD Diskette T ransfer rate (MB/sec) Sustained: 3,600 KB/s (24x) max.
Chapter 1 25 Blueray Combo Drive Item Spec ification Manufacturer and Model Sony NEC Optiar c BC-5500S-AR T yp e Drawer loading Interface SA T A Data T ransfer Modes • PIO mode • DMA • Ultra DMA33 Buffer Memory Size 4.
26 Chapter 1 LCD 14” Item Specification V endo r/mod el name • Samsung L TN140 A T01-G01 • AUO B140XW01 • LG LP140WH1 • CMO N140B6 - L02 Screen Diagonal (mm) 355.6 (14.0”) Display Area (mm) 309.399(H) X 173.952(V) Display resolution (pixels) 1366 x 768 Pixel Pitch 0.
Chapter 1 27 VGA Graphic Controller Keyboard Media Card Reader Audio Interface LAN CIR Bluetooth Item Specification T ype NB9MGS-512MB-DDR2 Features • Power Package Item Specification Keyboard Contr.
28 Chapter 1 Finger Prin t Reader WLAN Battery Item Specification Features • Power Package Item Specification Chipset • Protocol Interface Antenna Item Specifications (3S2P) V endor & model na.
Chapter 2 29 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is alre ady properly configured and optimi zed, and you do not need to run this utility .
30 Chapter 2 Information The Information screen displays a summary of your computer ha rdware information. NOTE: The system information is su bject to diff erent models. Parameter Description CPU T ype This field shows the CP U type and spee d of the system.
Chapter 2 31 Main The Main screen allows th e user to set the system time and date as well as enable and disable bo ot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen.
32 Chapter 2 Advanced The Advanced screen allows the user to c onfigu re the various advanced BIOS options. IMPORT ANT : Making incorrect settings to it ems on these p ages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend t hat you leave these settings at the default values.
Chapter 2 33 Video Configuration Enter the Video Configuration menu. • Render S tandby • IGD - Device2, Function1 • IGD - Pre-allocat Memory • IGD - DVMT Size • Clock Chip Initiali ze • Enabled CK SSC • IGD - Boot T ype • IGD - LCD Panel T ype • IGD - TV • IGD - P A VP Mode USB Configuration Enter the USB Configurati on menu.
34 Chapter 2 PCI Express Root Port n Enter the PCI Express Root Port 2 to 6 menus. NOTE: n = port number 2 to 6. • PCI Express Root Port n • VC1 Cable • ASPM • Automatic ASPM • URR • FER • NFER • CER • CTO • SEFE • SENFE • SECE • PME Interrupt • PME SCI • Hotplug SCI ASF Configuration Enter the ASF Config uration menu.
Chapter 2 35 Security The Security screen co ntains parameters that help sa feguard and protect your co mputer from unautho ri zed use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
36 Chapter 2 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a password in the “Ente r New Password” field.
Chapter 2 37 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw or d in the Enter Curr en t Pa ssw or d field and press Enter .
38 Chapter 2 Power The Power screen allows th e user to co nfig ure CPU and power management options. The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter setting s. Parameter Description Submenu Items Advanced CPU Control Enter the Advanced CPU Control menu.
Chapter 2 39 Platform Power Management Enter the Platform Power Management menu. • PCI Clock Run Break Event Enter the Break Event menu. • S torage Break Event • PCIE Break Event • PCI Break E vent • EHCI Break Event • UHCI Break Event • HDA Break Event ACPI S3 Enable or Disable ACPI S1/S3 Sleep S tate.
40 Chapter 2 Boot This menu allows the user to deci de the order of boot devices to l oad the operating syste m. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module bay . I n sy d eH 2 0 Se tup U ti l i ty R e v 3 .
Chapter 2 41 Exit The Exit screen allows you to save or discard any changes you made an d qui t th e BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS.
42 Chapter 2 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following con ditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM.
Chapter 2 43 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order , for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
44 Chapter 2 4. In flash BI OS, the me ssage Please do not remo ve AC Power Source displays. NOTE: If the AC power is n ot connected, the following message displays. Plug in the AC po wer to continue. 5. Flash is complete when the message Fl ash programming complete displays.
Chapter 2 45 Remove HDD/BIOS Password Utilities This section provide you with remo ving HDD /BIOS method: Remove HDD Password: When the user keys in the wrong password three times, the system reports the following error code to user . T o unlock the HDD password, perform the following steps: 1.
46 Chapter 2 Removing BIOS Passw or ds: If you key in the wrong Supervisor Password three time s, System Disabled displa ys on the screen. See the image below . T o reset the BIOS pa ssword, run BIOS_PW .EXE as follows: 1. Key in bios_pw 14452 0 2. Select one string from the list.
Chapter 2 47 3. Reboot the system and key in the selected string (qjjg9vy , 07yqmjd etc.) for the BIOS user password. Cleaning BIOS Passwords T o clear the password, perform the following steps: 1. From a D OS prompt , Execute clnpwd.exe 2. Press 1 or 2 to clean the desired password shown on the screen.
48 Chapter 2 Miscellaneous Utilities Using Boot Sequence Selector Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen.
Chapter 2 49 Example 2: Write Product Name to EEPROM Input: dmitools /wp Acer Example 3: Write Seri al Number to EEPROM Input: dmitools /ws 012345678901234 56789 Example 4: Writ e UUID to EEPROM Input.
50 Chapter 2.
Chapter 3 51 Machine Disassembly and Replacement This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting .
52 Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 53 External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graph ic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicin g .
54 Chapter 3 Removing the Battery Pack 1. T urn computer over . 2. Slide the battery lock/unlock l atch to the unlock p osition. 3. Slide and hold the battery rel ease latch to the release po sition (1), then lift out the battery pack from the main unit (2).
Chapter 3 55 Removing the SD dummy card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot..
56 Chapter 3 Removing the ExpressCard dummy card 1. Push the ExpressCard all the way in to eject the ExpressCard dummy . 2. Pull it out from the slot..
Chapter 3 57 Removing the Lower Covers 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the SD dummy card” on page 55. 3. See “Removing the ExpressCard dummy card” on page 56. 4. Loosen the five capti ve screws in the covers as shown.
58 Chapter 3 7. Carefully open the HDD Cover ..
Chapter 3 59 Removing the WLAN Module 1. See “Removing the Lower Covers” on page 57. 2. Disconnect the two antenna cables. 3. Remove the two securing screws.
60 Chapter 3 Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 57. 2. Push out the release latches on both sides of the DIMM socket to release th e DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the second DIMM module.
Chapter 3 61 Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 57. 2. Hold the Pull T ab and slide the HDD away from the connector . 3. Pull the HDD up a s shown to remo ve. NOTE: T o prevent damage to HDD, avoid pressing do wn on it or placing heavy objects on top of it.
62 Chapter 3 4. Remove the four screws (two each side) securing the HDD to the carrier . 5. Lift the HDD carrier to remove. Ste p Size Quantity Screw T ype HDD Carrier M3*3 4.
Chapter 3 63 Removing the Optical Disk Drive Module 1. See “Removing the Lower Covers” on page 57. 2. Remove the screw securing the ODD module. 3. Insert a screw driver as shown and push the ODD Module out of the bay . Ste p Size Quantity Screw T ype ODD Module M2.
64 Chapter 3 4. Remove the two screws securing the ODD bracket and re move the ODD bracket from the opti cal disk drive module. 5. Insert a pin in the eject hole of the ODD to eject th e ODD tray . 6. Press down on the locking catch to release the ODD cover and remove.
Chapter 3 65 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Ste p Screw Quantity Part No. Hinge Covers M2*3 2 86.AD302.001 Switch Cover M2.5*3 4 86.AD302.002 M2.5*10 2 86.AD302.004 Function Board M2.5*3 2 86.AD302.002 S peaker Module M2 .
66 Chapter 3 Upper Cover M2.5*10 10 86.AD302.004 M2.5*5 6 86.AD302.003 M2.5*3 1 86.AD302.002 Finger Print Reader M2*3 1 86.AD302.001 T ouchPad Bracket M2*3 2 86.AD302.001 eKey Board M2.5*3 1 86.AD302.002 USB Board M2.5*3 1 86.AD302.002 Modem Module M2*3 2 86.
Chapter 3 67 Removing the Hinge Covers 1. See “Removing the Battery Pack” on page 54. 2. Remove the two screw caps and screws from the Hinge Covers. 3. Slide the covers off the hing es in the direction of the arrows. IMPORT ANT : The left and right Hinge Cove rs are shaped differently and marked L and R o n the inside.
68 Chapter 3 Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover ma y cause damage to the outer casing. It is recommended that only fingers are us ed to remove the Switch Cover . 1. See “Removing the Battery Pack” on page 54.
Chapter 3 69 6. Using both hands, lift both sides of the rear edge of the Switch Cover upward as shown. 7. Lift the left side of the Switch Cover first and gently ro tate it while lifting the right side clear of the casing. 8. Lift the Switch Cover clear of the chassis.
70 Chapter 3 Removing the Keyboard 1. See “Removing the Switch Cover” on page 68. 2. Lift the keyboard from both sides to clear the securing tabs on both sides of the Keyboard. 3. Push the Keyboard toward the LCD screen to expose the Keybo ard FF C cable.
Chapter 3 71 Removing the Function Board 1. See “Removing the Switch Cover” on page 68. 2. Remove the two securing screws from the Function Board. 3. Unlock the connector and remove the FFC cable. 4. Rotate the board upward as shown and remove it from the chassis.
72 Chapter 3 Removing the Speaker Module 1. See “Removing the Keyboard ” on page 70. 2. Remove the two securing screws from the S pea ker Module. 3. Remove the adhesive tape securing the LCD cables to the Speaker Module. 4. Disconnect th e sp ea ke r cabl e as sh ow n .
Chapter 3 73 5. Rotate the S peaker Modul e upward, rear edge first to clear the LCD cable s, and remove it from the chassis..
74 Chapter 3 Removing the LCD Module 1. See “Removing the WLAN Module” on page 59. 2. See “Removing the Keyboard ” on page 70. 3. T urn the computer over . Remo ve the two securing screws as shown. 4. Lift the securing tape to expose the Antenna cable as shown.
Chapter 3 75 6. Completely remove the Ante nna cable from the cable channel. 7. T urn the computer over . Remo ve the two adhesive strips from the Antenna cable. 8. Rest the computer on the LCD Module and push the Antenna cabl e through the chassis as shown.
76 Chapter 3 9. Completely remove the Ante nna from the cable chan nel. 10. Disconnect the LCD cables from the Mainboard as shown..
Chapter 3 77 11 . Remove the two securin g screws from the left LCD hinge. 12. Peel back the adhesive strip from the LCD Hinge as shown. Ste p Size Quantity Screw T ype LCD Module M2.
78 Chapter 3 13. Remove the two securing screw s from the right LCD hing e. 14. Carefully remove the LCD Module from th e chassis. Ste p Size Quantity Screw T ype LCD Module M2.
Chapter 3 79 Removing the Upper Base 1. See “Removing the LCD Module” on page 74. 2. T urn the computer over . Remo ve the ten screws on the bottom panel. 3. T urn the computer over . Remo ve the two securing screws on the top panel. Ste p Size Quantity Screw T ype Upper Cover (red call out) M2.
80 Chapter 3 4. T urn the computer over and disconnect the four FFC cables from the mainboard. Unlock the connector and disconnect A as shown. Un lock the conne ctor and disconnect B as shown. Unlock the connector and disconnect C as shown. Unlock the connector an d disconnect D as shown.
Chapter 3 81 W ARNING: Care must be taken when removing the Upper Base from the Lower Base to prevent damage or stress to the surface. 5. Ease the lower casing outwar d to clear the securing clips and pry apart the left side as shown, and li ft the rear edge of the Upper Base upward.
82 Chapter 3 Removing the Finger Print Reader NOTE: Only the Discrete SKU supports Finger Print Reader technology . 1. See “Removing the Upper Base” on page 79. 2. Remove the single securi ng screw on the bracket. 3. Lift the bracket clear of the casing.
Chapter 3 83 4. Lift the FFC, as shown, to di sengage the adhesive and remove the Fin ger Print Reader Board from the casing..
84 Chapter 3 Removing the TouchPad Bracket 1. See “Removing the Upper Base” on page 79. 2. Lift the FFC, as shown, to disengage the adhesive. 3. Open the FF C locking latch a s shown and remove the FFC. 4. Remove the two screws from the T ouchPad Bracket and remove it from the casing.
Chapter 3 85 5. Remove the T ouchPad Bracket from the Upper Base..
86 Chapter 3 Removing the eKey Board 1. See “Removing the Upper Base” on page 79. 2. Remove the single securing screw from the board. 3. Lift the FFC to detach the adhesive strip. 4. Remove the eKey Board from the Upper Base. Ste p Size Quantity Screw T ype ekey Board M2.
Chapter 3 87 Removing the Media Board W ARNING: Care must be taken when removing the Media Board Cover from the Upper Base to preven t damage or stress to the surface. 1. See “Removing the Upper Base” on page 79. 2. Lift up the FFC to detach the adhesive.
88 Chapter 3 5. Using a plastic tool, pre ss down the pin securing the Media Board in place and slide the Media Board in the direction of the arrow to release the locking pins. 6. Lift the Media Board from the Upper Base and feed t he FFC throug h the casing to remove the Media Board.
Chapter 3 89 Removing the USB Board 1. See “Removing the Upper Base” on page 79. 2. Remove the single securing screw from the USB board. 3. Open the FFC locking latch and remove the FF C from the Mainb oard. 4. Lift the FFC to detach the adhesive from the casing.
90 Chapter 3 5. Lift the USB Board clear of the casing..
Chapter 3 91 Removing the Modem Module 1. Remove the U pper Base. Se e “Removing th e Upper Base” on pag e 79. 2. Remove the adhesive tape securing the cable to the Modem and remove the two securing screws. 3. Lift the Modem Module clear of the Mainboard as shown.
92 Chapter 3 Removing the Bluetooth Module 1. See “Removing the Upper Base” on page 79. 2. Grasp the cable as shown and pull to disconnect fro m the Bluetooth module. 3. Disconnect the cable from the Mainboard and re move the adhesive tape to free the cable.
Chapter 3 93 Removing the Mainboard 1. See “Removing the Upper Base” on page 79. 2. See “Removing the USB Board” on page 89. 3. See “Removing the Modem Modul e” on page 91. 4. See “Removing the Bluetooth Modu le” on page 92. 5. Grasp the RJ-1 1 cable and remove it from the Mainboard a s shown.
94 Chapter 3 7. Lift the mainboard right side fi rst to remove from the base..
Chapter 3 95 Removing the RJ-11 Port 1. See “Removing the Mainboard” on page 93. 2. T urn the Lower Base over and pull the Modem cable through th e ca sing as shown. 3. Completely remove the Modem cable from the cable channel . 4. T urn the computer over .
96 Chapter 3 5. Remove the adhesive tape and lift the c able out of the cable channel as shown. 6. Detach the adhesive and lift the cable bundle out of the casing.
Chapter 3 97 Removing the Thermal Module 1. See “Removing the Mainboard” on page 93. 2. T urn the Mainboard over and place on a clean surface. 3. Hold the fan cable connector and lift to disconnect from the mainboard. 4. Remove the four screws from the Thermal Module numerically , from 4 to 1.
98 Chapter 3 W ARNING: T o prevent damage to the T hermal Modu le or the CPU, hold and lift the Thermal Module by lifting both ends up and away at the same time.
Chapter 3 99 Removing the CPU 1. See “Removing the Therma l Module ” on page 97. 2. Using a flat screwdriver , turn the CPU socket la tch counter-clockwise 180° to release the CPU.
100 Chapter 3 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*5 6 86.AD302 .0 03 Camera Module M2.5*3 1 86.AD302 .002 LCD Panel M2.5*5 2 86.AD302.003 M2.5*3 1 86.AD302.002 LCD Brackets M2 *3 6 86.
Chapter 3 101 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 74. 2. Remove the six screw ca ps and screws as shown. 3. S t arting at the centre of the top edge, pry the inside of the bezel away from the screen. Work round the edges to pry the bezel away from the screen as show n.
102 Chapter 3 4. Lift the bezel away from the panel..
Chapter 3 103 Removing the Camera Module 1. See “Removing the LCD Bezel” on page 101. 2. Remove the single screw from the Camera Bracket as shown. 3. Lift the Camera Bracket, right side first, clear of the casing. 4. Lift the Camera Module cle ar of the casing and disconnect the cable from the Module.
104 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Module” on page 103. 2. Remove the two securing screws from the LCD hinges and the single LCD grounding scre w . 3. Remove the Camera cable bundle from the top of the casing as shown.
Chapter 3 105 4. Lift the LCD Panel out of the casing as shown..
106 Chapter 3 Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 104. 2. T urn the LCD Panel over on a clean surface, and lift the cable as shown to detach the adhesive. 3. Grip the adhesive strip covering the LCD cable connector and pull it back (1).
Chapter 3 107 Removing the Antennas 1. See “Removing the LCD Panel” on page 104. 2. Remove the strips holding the anten na cables in place. Ensure the c ables are free from obstructions. 3. Remove the tab securing the left and right antennas to the LCD module and lift the antennas clear .
108 Chapter 3 Removing the MIC Module 1. See “Removing the Antenna s” on page 107. 2. Remove the strips and tape holding the MIC Module cable in place. Ensure the cable is free from obstructions. 3. Remove the MIC cable and Module from the L CD module.
Chapter 3 109 LCD Module Reassembly Procedure Replacing the MIC Module 1. Replace the MIC Module in the LCD casin g. 2. Run the cable as shown and replace the adhesi ve strips to hold it in place. IMPORT ANT : Ensure that the cable runs as shown in the hinge well ar ea to avoid trappi ng.
11 0 Chapter 3 Replacing the Antennas 1. Run the right side Antenna cable as shown in the hinge well to avoid trapping. 2. Run the cable as sho wn and replace th e adhesive strip. 3. Run the cable along the edge of th e casing using all available cable clips.
Chapter 3 111 7. Run the left side Antenna cable as shown in the hinge well to avoid trapping. 8. Run the cable along the edge of the casing usin g all available cable clips. 9. Run the cable as shown and replace the adhesive strip. 10. Run the cable as shown and replace the a dhesive strip.
11 2 Chapter 3 13. Ensure that the securi ng pin is properly located..
Chapter 3 11 3 Replacing the LCD Panel 1. Align the LCD brackets with the six screw holes (three on each side) o n the LCD Panel a s shown. 2. Replace th e six securin g screws in nume ric order, from 1 to 3. 3. T urn the panel over . Insert the LCD Panel cable into the LCD Panel as shown (1).
11 4 Chapter 3 7. Replace the Came ra Module cable bundle in the casi ng as shown. 8. Replace the three screws to secure the p anel and groundin g within the LCD module. IMPORT ANT : When replacing the screws in th e LCD brackets (red callout) do not use the screw holes marked with ‘X’.
Chapter 3 11 5 Replacing the Camera Module 1. Reconnect the LCD cabl e to the Camera Module. 2. Place the Camera Module in the casing as shown. 3. Ensure that the locating pins are correctly seated. 4. Insert the Camera Bracket left side first to engage the securing clip.
11 6 Chapter 3 Replacing the LCD Bezel 1. Place the Bezel on the casing bottom edge first and press in the areas marked to snap it i nto place. 2. Press down the sides of the bezel, working toward the top edge. 3. Press down the top edge to complete the process.
Chapter 3 11 7 Main Module Reassembly Procedure Replacing the CPU IMPORT ANT : The CPU has a Pin1 locator that must be pos ition ed corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator .
11 8 Chapter 3 Replacing the Thermal Module W ARNING: T o prevent damage to the T hermal Modu le or the CPU, hold the Thermal Module by both ends at the same time. IMPORT ANT : If the replacement Therma l Module does not include the thermal protecti on pad shown below , reuse the original thermal protection pad with the new Thermal Module.
Chapter 3 11 9 Replacing the RJ-11 Port 1. Replace the RJ-1 1 Po rt in the casing a s shown. 2. Place the cable bundle in the casing and app ly pressure to secure th e adhesive in place. 3. Run the cable along the cable chan nel usi ng all available cable clips.
120 Chapter 3 7. Insert the cable through the casing to the to p side as shown..
Chapter 3 121 Replacing the Mainboard 1. Ensure that the Mainboa rd is face up. Place the Mainboard i n the chassis, le ft hand edge first to allo w the I/O Ports through the casing, then lower it into place. 2. Ensure the screw socket is aligned. Replace the single securing screws as shown.
122 Chapter 3 Replacing the Bluetooth Board Replacing the Modem Module 1. Insert the Bluetooth Module l eft side first and lower it into place. 2. Replace the single securing screw . 3. Reconnect the Bluetooth cable to the Mainboard and secure the cable in place with the tape.
Chapter 3 123 Replacing the USB Board 3. Align the screw sockets and replace the two screws. 4. Secure the Modem cable in p lace with the adhesive tape. 1. Insert the USB Board into the casing, ensuring that the USB Port is access ible through the case.
124 Chapter 3 Replacing the Media Board 1. Insert the Media Board FFC through the Upper Base as shown, a place the board in the bay . 2. Slide the Media Board in the direction of the arrow to engage the securing clips. 3. Press the Media Board down to secure it in place.
Chapter 3 125 Replacing the eKey Board Replacing the TouchPad Bracket 1. Place the eKey Board i n the Upper Base, right si de first, to engage the securing clip. 2. Run the FFC cable along the casing as shown. Press down to secure it in place. 3. Replace the single securing screw .
126 Chapter 3 Replacing the Finger Print Reader 3. Replace the FFC and close the locki ng latch. 4. Ru n the cable along the Bra cket and press down to secure it in pl ace. 1. Replace the Finger Print Reader in the Upper Cover in the direction of the arrow .
Chapter 3 127 Replacing the Upper Cover W ARNING: Care must be taken when replacing the Up per Co ver to prevent damage or stress to the surface. 1. Place the Upper Cover on the Lower Cover , front edge first, and lower it into place. 2. S t arting with the sides, press down all around t he peri meter of the cover to secure it in place.
128 Chapter 3 3. Reconnect the four FFC cables to the mainboard. Connect A as shown and lock the connector . Co nnect B as shown and lock the connector .
Chapter 3 129 4. Replace the two securing screws in the Upper Cover . 5. T urn the computer over . Replace the fifteen screws on the bottom panel..
130 Chapter 3 Replacing the LCD Module 1. Carefully align the LC D module over the hi nge sockets and lower the module into the chassis, taking care not to trap the LCD cables. 2. Replace the two securin g screws on the right hinge as shown. 3. Replace the adhesive strip on the left hinge.
Chapter 3 131 IMPORT ANT : Run the cables as shown to avoid trapping when the Switch Cover is replaced. 6. Insert the Antenna cables through the casing, as shown, and pull through from the underside. 7. Ensure the cable is pulled completely throug h the casing.
132 Chapter 3 IMPORT ANT : Run the cables as shown to avoid trapping when the Switch Cover is replaced. 9. Re pla ce the two adhesive strips to secure the cables in place. 10. Pull the Antenna through the casing into the WLAN bay as shown. 11 . Run the Antenna cables alo ng the cable channel as shown, using all the available cable clips.
Chapter 3 133 13. Replace the two securing screws..
134 Chapter 3 Replacing the Speaker Module 1. Align and replace th e S peaker Module in the lower case. IMPORT ANT : Run the LCD cables over the S peaker Module as shown to avoid trapping when the Switch Cover is replaced. 2. Reconnect the S peaker cable.
Chapter 3 135 Replacing the Function Board 1. Insert the Function Board , rear edge first, into the casing. 2. Rotate the board downward and apply pre ssu re, ensuring that the locating pin s are correctly seated. 3. Reconnect the FFC cable and close the locking latch.
136 Chapter 3 Replacing the Keyboard 1. Place the Keyboard on the Upper Cover , face up and reconnect the FF C cable to the Mainboard. 2. Insert the Keyboard, front edge first, into the Upper Cover as shown. Ensure that the five tabs are correctly seated.
Chapter 3 137 Replacing the Switch Cover 1. Place the Switch Cover on the Upper Case as shown. 2. Press down both sides of the Switch Cover to sna p it into place. 3. Continue to press down as shown to correctly seat the Switch Cover on the Upper Cover .
138 Chapter 3 4. T urn the computer over and replac e the six securing screws as shown..
Chapter 3 139 Replacing the Hinge Covers IMPORT ANT : The left and right Hinge Cove rs are shaped differently and marked L and R o n the inside. Ensure that the correct cover is used during reassembly . 1. Align the Hinge Covers screw hole side up and slide th em on to the hinge assemblies.
140 Chapter 3 Replacing the ODD Module 1. Align the ODD Bezel as shown and press it into place. Close the ODD drawer . 2. Align the ODD Bracket as shown and replace the securing screws. 3. Push the ODD Module into the chassis as shown until the bezel is flush with the casing.
Chapter 3 141 Replacing the Hard Disk Drive Module Replacing the DIMM Modules NOTE: T o replace DIMM Module 2, first remove DIMM Module 1. In this procedure , only DIMM Module 1 is shown. 1. Place the HDD carrier on the HDD. 2. Replace the four securing screws (two each side).
142 Chapter 3 Replacing the WLAN Module Replacing the Lower Covers 1. Insert the WLAN board in to the WLAN socke t. 2. Replace the two screws to secure the module. 3. Connect the two antenna cables to the module. NOTE: The White cable go es to the upper terminal and the black cable to the lower termin al.
Chapter 3 143 Replacing the ExpressCard an d SD Card Dummy Trays Replacing the Battery 1. Insert the ExpressCard an d push in to the slot until flush with the chassis cover . 2. Insert the SD Card and push into the slot until flush with the chassis cover .
144 Chapter 3.
Chapter 4 145 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
146 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llow ing actions one at a time to correct the problem.
Chapter 4 147 No Display Issue If the Displa y doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
148 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 149 LCD Failure If the LCD fails, perform the following actions one at a ti me to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the pro blem.
150 Chapter 4 Touchpad Failure If the To u c h p a d doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em.
Chapter 4 151 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager .
152 Chapter 4 Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Microphone Problems If internal or external Mic rophones do no op erate correctl y , perform the following actions one at a time to correct the problem.
Chapter 4 153 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
154 Chapter 4 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits a.
Chapter 4 155 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-cl ick on the device and click Enable . b. Double-click DVD/C D-RO M dri ves . If the device displays a down arrow , right-click on the device and click Enable .
156 Chapter 4 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable.
Chapter 4 157 USB Failure (Rightside) If the rightside USB port fails, perform the following actio ns one at a time to correct the problem. Do not replace a non-defective FRUs: Modem Function Failure If the internal Modem fails, perform the followin g actions one at a time to correct the problem.
158 Chapter 4 Wireless Function Failure If the WLAN/WiMAX fails, perform the fol lowing actions one a t a time to correct the prob lem. Do not replace a non-defective FRUs: Bluetooth Function Failure If the Bluetooth fails, perform the following actions one at a time to correct the problem.
Chapter 4 159 EasyTouch Button Failure If the Ace r EasyT ouch buttons fail, perform the following action s one at a time to correct the problem. Do not replace a non-defective FRUs: Media Board Failure If the Media Boa rd fails, perform the following actions one at a time to correct the problem.
160 Chapter 4 Fingerprint Reader Failure If the Fingerp rint Reader fails, pe rform th e following actions one at a time to correct the problem. Do no t replace a non-defective FRUs: Thermal Unit Failure If the Thermal Unit fails, perform the follo wing actions one at a time to correct the problem.
Chapter 4 161 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t th e problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connection, i nsert new batteries a nd confirm there is a goo d connection.
162 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothin g to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 163 POST Codes Tables These tables describe the POST code s and descriptions durin g th e POST . Sec: NO_EVICTION_MODE_DEBUG EQU 1 (Comm onPlatformsecIa32SecCore.
164 Chapter 4 BDS & Specific action: 0x27 Enable DRAM Channel I/O Buffers 0x28 Enable all clocks on populated rows 0x29 Perform JEDEC memory init ialization for all memo ry rows 0x30 Perform steps.
Chapter 4 165 Each PEIM entry point used in 80_PORT Each Driver entry point used in 80_PORT Code Description 0x00 0x01 PEI_EVENT_LOG 0xA1 PEI_OEM_SER VICE 0xA2 PEI_SIO_INIT 0xA3 PEI_MONO_ST A TUS_CODE.
166 Chapter 4 0xC4 SECURITY_STUB 0xC5 DXE_CP U_IO 0xC6 CF9_RESET 0xC7 PC_RTC 0xC8 ST A TUS_CODE 0xC9 V ARIABLE EMU_V ARIABLE 0xD9 DXE_CHIPSET_INIT 0x45 DXE_ALERT_FORMA T 0xD6 PCI_HOST_BRIDGE 0xD7 PCI_.
Chapter 4 167 0x72 MONITER_KEY 0x73 LEGACY_BIOS 0x75 LEGACY_BIOS_PLA TFORM 0x76 PCI_PLA TFORM 0x6C ISA_FLOOPY 0x6D PS2_MOUSE 0x6E USB_BOT 0x6F USB_CBI0 0x74 USB_MOUSE 0xF A SETUP_UTILITY 0x90 FW_BLOCK.
168 Chapter 4 Each SmmDriver entry point used in 80_PORT Code Description 0xD4 SMM_ACCESS 0xDE SMM_CONTROL 0xCC SMM_BASE 0xD2 SMM_RUNTIME 0xDF SB_SMM_DISP A TCH 0xD0 SMM_THUNK 0xCA SMM_ACPI_SW_CHILD 0.
Chapter 5 169 Jumper and Connector Locations Top View Item Pin Description Item Pin Descriptio n 1 JPJ1 RJ-45 Connector 15 JP16 FP Board Con nector 2 LED5 AC-IN LED 16 JP23 Keyboard Connector 3 LED10 .
170 Chapter 5 Bottom View Item Pin Description Item Pin Descrip tion 1 JDIMM2 DDR2 Socket 13 JCRT1 D-Sub Connector 2 PJP2 Battery Connector 14 JP17 eSA T A/USB Port 3 JDIMM1 DDR2 Socket 15 JHDMI1 HDMI.
Chapter 2 171 Clearing Password Check and BIOS Recovery This section provide you the standard operating proce dures of clearing password and BIOS recovery for Aspire 4935/4935G . Aspire 4935/49 35G provide s one Hardware Open Gap on main boa rd fo r clearing password check, and one Hotkey for enabling BIOS Recovery .
172 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Chapter 6 173 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replaceab le Unit) listing in global configurations of Aspire 4935/493 5G . Refer to this chapter whenever orderi ng for parts to repair or for RMA (Return Merchandise Authorization).
174 Chapter 6 Aspire 4935/4935G Exploded Diagrams Main Module Item Description Part No. Item De scription Part No. 1 Switch Cover 60.AD302.001 8 Media Board 55.AD302.003 2 Keyboard KB.INT00.261 9 Mini Door 42.AD302.006 3 Hinge Cover Left and Right 42.
Chapter 6 175 Aspire 4935/4935G FRU List Category Descriptio n Acer P/N Adapter ADAPTER 65W 3PIN DEL T A SADP-65KB DFJ AP .06501.022 ADAPTER 65W 3PIN DEL T A SADP-65KB BFJG OBL AP .06501.023 ADAPTER 65W 3PIN HIPRO AC-OK065B13 AP .0650A.01 1 ADAPTER 90W 3PIN DEL T A ADP-90SB BBGF AP .
176 Chapter 6 W/L CARD INTEL 1X2 512AN_MMW G SIN/PHI FCC/IC KI.SPM01.003 W/L CARD INTEL 1X2 512AN_ MMWG 150 FCC/IC KI.SPM01.003 W/L CARD INTEL 3X3 533AN_MMW G SIN/PHI FCC/IC KI.SPM01.001 W/L CARD INTEL 3X3 533AN_MMWG FCC/IC KI.SPM01.001 W/L CARD RT2700E RALINK NI.
Chapter 6 177 FP BRACKET 33.AD302.001 TP BRACKET 33.AD302.002 HINGE CAP R&L 42.AD302.003 HDD DOOR 42.AD302.004 RAM DOOR 42.AD302.005 MINI DOOR 42.AD302.006 CPU/Processor CPU INTEL P8400 2.26G AW80577SH0513M SLB3R M0 KC.84001.DPP CPU INTEL P8600 2.
178 Chapter 6 ODD BEZEL-COMBO 42.AD30 2.007 ODD BRACKET 33.AD302.003 Super Multi Drive DVD SUPER MUL TI DRIVE MODUL E 6M.AD302.002 DVD SUPER MUL TI DRIVE TS-L633A TSST KU.00801.021 DVD SUPER MUL TI DRIVE G T10N HLDS KU.0080D.039 DVD SUPER MUL TI DRIVE DS-8A2S PLDS KU.
Chapter 6 179 HDD HDD SA T A 160G 5400RPM HGST HTS543216L 9A300 KH.16007.019 HDD SA T A 160G 5400RPM TOSHIBA MK1652GSX TBD HDD SA T A 160G 5400RPM SEAGA TE ST9160310AS KH.1600 1.034 HDD SA T A 160G 5400RPM WD WD1600BEVT -22ZCT0 KH.1600 8.022 HDD SA T A 250G 5400RPM HGST HTS543225L 9A300 KH.
180 Chapter 6 KEYBOARD (ND) SCANDINA VIAN KB.INT00.295 KEYBOARD (AR/FR) ARABIC/FRENCH KB.INT00.294 KEYBOARD (CB) CANADIAN BILINGUAL KB.INT00.296 KEYBOARD (SV) SLOV AK KB.INT00.269 KEYBOARD (BZ) BRAZILIAN KB.INT00.291 KEYBOARD (CZ/SK) CZECH-SLOV AKIAN KB.
Chapter 6 181 CAMERA BRACKET 33.AD302.006 Mainboard MB ASSY W/O CPU/RA M-UMA MB.AD302.001 MB ASSY 256MB W/O CPU/RAM-DIS TBD MB ASSY 512MB W/O CPU/RAM-DIS MB.AC902.001 Memory RAM 512M DDRII 667 SAMSUNG M470T6464QZ3-CE6 KN.5120B.026 RAM 512M DDRII 667 HYNIX HYMP164S64CP6-Y5 K N.
182 Chapter 6 Screw List Category Description Acer P/N. Screw SCREW M2.0D 3.0L K4.6D 0.8T ZK 86.AD302.001 SCREW M 2.5D 3.0L K5.5D 0.8T ZK 86.AD302.002 SCREW M 2.5D 5L K 5.5D ZK NL 86.AD302.003 SCREW M2.5D 10.0L K 5.5D 0.8T ZK 86.AD302.004 SCREW M M 3.
Chapter 6 183.
Appendix A 184 Model Definition and Configuration Aspire 4935/4935G Series Model RO Country Acer Part No Description CPU AS4935- 581G16Mn AAP Vietnam LX.AD 30C.002 AS4935-581G16 Mn LINPUSA VN1 UMACE 1*1G/ 160/BT/6L/6R/ CB_n2_1.0D_HG_EN 1 1 C2DT5800 AS4935- 581G16Mn P A Canada LX.
185 Appendix A AS4935- 582G16Mn AAP Malaysia LX.AD30X. 077 AS4935-582G16Mn EM VHP32A TMY1 MC UMACE 1*2G/160/BT/6L/6R/ CB_n2_1.0D_HG_EN 14 C2DT5800 AS4935- 582G25Mn AAP Vietnam LX.AD 30C.004 AS4935-582G25 Mn LINPUSA VN1 UMACE 1*2G/ 250/BT/6L/6R/ CB_n2_1.
Appendix A 186 AS4935- 583G16Mn PA A C L A - S panish LX.AD30X.01 1 AS4935 -583G16Mn VHP32A TEA1 MC UMACE 2G+1G/160/6L/6R/ CB_n2_1.0D_HG_ES21 C2DT5800 AS4935- 583G25Mn EMEA South Africa LX.AD30X .073 AS4935-583G25Mn EM VHP32A TZA2 MC UMACE 2G+1G/250/6L/6R/ CB_n2_1.
187 Appendix A AS4935- 583G25Mn EMEA Eastern Europe LX.AD30X.066 AS4935 -583G25Mn VHP32A TEU3 MC UMACE 2G+1G/250/6L/6R/ CB_n2_1.0D_HG_RU22 C2DT5800 AS4935- 583G25Mn EMEA Eastern Europe LX.AD30X.061 AS4935 -583G25Mn VHP32A TEU3 MC UMACE 2G+1G/250/6L/6R/ CB_n2_1.
Appendix A 188 AS4935- 583G25Mn EMEA Middle East LX.AD30X.047 AS4935-583G25Mn EM VHP32A TME9 MC UMACE 2G+1G/250/6L/6R/ CB_n2_1.0D_HG_FR22 C2DT5800 AS4935- 583G25Mn EMEA Middle East LX.AD30X.050 AS4935-583G25Mn EM VHP32A TME2 MC UMACE 2G+1G/250/6L/6R/ CB_n2_1.
189 Appendix A AS4935- 591G16Mn P A USA LX.AD30X.024 AS4935-591G16Mn VHP32A TUS1 MC UMACE 1*1G/160/6L/6R/ CB_n2_1.0D_HG_EN 33 C2DT5900 AS4935- 591G16Mn PA A C L A - Portuguese LX.AD30X.025 AS4935 -591G16Mn EM VHP32A TXC2 MC UMACE 1*1G/160/6L/6R/ CB_n2_1.
Appendix A 190 AS4935- 593G16Mn PA A C L A - Portuguese LX.AD30X.005 AS4935-593G16Mn VHP32A TXC2 MC UMACE 2G+1G/160/6L/6R/ CB_n2_1.0D_HG_XC 22 C2DT5900 AS4935- 593G16Mn PA A C L A - S panish LX.AD30X.006 AS4935 -593G16Mn EM VHP32A TEA1 MC UMACE 2G+1G/160/6L/6R/ CB_n2_1.
191 Appendix A AS4935- 731G16Mn PA A C L A - Portuguese LX.AD30X.037 AS4935 -731G16Mn EM VHP32A TXC2 MC UMACE 1*1G/160/6L/6R/ CB_n2_1.0D_HG_XC 21 C2DP7350 AS4935- 731G16Mn PA A C L A - S panish LX.AD30X.036 AS4935 -731G16Mn EM VHP32A TEA3 MC UMACE 1*1G/160/6L/6R/ CB_n2_1.
Appendix A 192 AS4935- 733G25Mn PA A C L A - S panish LX.AC60X.005 AS4935-733G25Mn VHP32A TEA3 MC UMACEF 2G+1G/250/6L/6R/ CB_n2_FP_1.0D_HG_ES21 C2DP7350 AS4935- 733G25Mn PA A C L A - S panish LX.AC60X.004 AS4935 -733G25Mn EM VHP32A TEA3 MC UMACEF 2G+1G/250/6L/6R/ CB_n2_FP_1.
193 Appendix A AS4935G- 582G32Mn CHINA China LX.AD80X .002 AS4935G-582G32Mn VHP32A TCN1 MC 9MGSHM512CEF 1*2G/320/6L/ 6R/CB_n2_FP_1.0D_HG_SC1 1 C2DT5800 AS4935G- 592G32Mn AAP Thailand LX.AD 80C.002 AS4935G-59 2G32Mn LINPUSA TH1 9MGSHM512CEF 1*2G/320/ BT/6L/6R/ CB_n3_FP_1.
Appendix A 194 AS4935G- 644G32Mn EMEA Holland LX.AC90X.077 AS4935 G-644G32Mn VHP32A TNL1 MC 9MGSHM512CE 2*2G/320/BT/ 6L/6R/CB_n2_1.0D_HG_NL12 C2DT6400 AS4935G- 644G32Mn EMEA Luxembourg LX.AC90X .078 AS4935G-644G32Mn VHP32A TLU1 MC 9MGSHM512CE 2*2G/320/BT/ 6L/6R/CB_n2_1.
195 Appendix A AS4935G- 644G32Mn EMEA Greece LX.AC90X .064 AS4935G-644G32Mn VHP32A TGR1 MC 9MGSHM512CE 2*2G/320/BT/ 6L/6R/CB_n2_1.0D_HG_EL32 C2DT6400 AS4935G- 644G32Mn EMEA Greece LX.AC90X .065 AS4935G-644G32Mn VHP32A TGR1 MC 9MGSHM512CE 2*2G/320/BT/ 6L/6R/CB_n2_1.
Appendix A 196 AS4935G- 644G32Mn EMEA UK LX.AC90X.050 AS4935G-644G32Mn VHP32A TGB1 MC 9MGSHM512CE 2*2G/320/BT/ 6L/6R/CB_n2_1.0D_HG_EN14 C2DT6400 AS4935G- 731G16Mn CHINA China LX.AD80C.001 AS4935G-731G16Mn LINPUSACN1 9MGSHM512CEF 1*1G/160/6L/ 6R/CB_n2_FP_1.
197 Appendix A AS4935G- 732G32Mn AAP Philippines LX.AD 80X.021 AS4935G-732G32Mn EM VHP32A TPH1 MC 9MGSHM512CEF 1*2G/320/ BT/6L/6R/ CB_n2_FP_1.0D_HG_EN14_Bl ue UV C2DP7350 AS4935G- 732G32Mn TWN GCTWN LX.AD 80X.020 AS4935G-732G32Mn VHP32A TTW1 MC 9MGSHM512CEF 1*2G/320/ BT/6L/6R/ CB_n2_FP_1.
Appendix A 198 AS4935G- 733G32Mn EMEA Middle East LX.AC90X.040 AS4935G-733G32Mn EM VHP32A TME6 MC 9MGSHM512CE 2G+1G/320/ 6L/6R/CB_n2_1.0D_HG_EN15 C2DP7350 AS4935G- 733G32Mn EMEA Switzerland LX.AC 90X.037 AS4935G-733G32Mn VHP32A TCH1 MC 9MGSHM512CE 2G+1G/320/ 6L/6R/CB_n2_1.
199 Appendix A AS4935G- 733G32Mn EMEA Ukraine LX.AC90X.025 AS4935G-73 3G32Mn VHP32A TUK1 MC 9MGSHM512CE 2G+1G/320/ 6L/6R/CB_n2_1.0D_HG_RU1 1 C2DP7350 AS4935G- 733G32Mn EMEA Sweden/ Finland LX.AC90X.021 AS4935G-733G32Mn VHP32A TSE1 MC 9MGSHM512CE 2G+1G/320/ 6L/6R/CB_n2_1.
Appendix A 200 AS4935G- 733G32Mn AAP Singapore LX.AD80X.01 1 AS4935G-733G32Mn VHP32A TSG1 MC 9MGSHM512CEF 2G+1G/320/ BT/6L/6R/ CB_n3_FP_1.0D_HG_ZH31_Bl ue UV C2DP7350 AS4935G- 733G32Mn AAP Singapore LX.AD80X .012 AS4935G-73 3G32Mn VHP32A TSG1 MC 9MGSHM512CEF 2G+1G/320/ BT/6L/6R/ CB_n3_FP_1.
201 Appendix A AS4935G- 863G25Mn P A USA LX.AC90X.008 AS4935G-863G25Mn VHP32A TUS1 MC 9MGSHM512CE 2G+1G/250/ 6L/6R/CB_n2_1.0D_HG_EN33 C2DP8600 AS4935G- 863G25Mn PA A C L A - Portuguese LX.AC90X.009 AS4935G-863G25Mn EM VHP32A TXC2 MC 9MGSHM512CE 2G+1G/250/ 6L/6R/CB_n2_1.
Appendix A 202 AS4935G- 864G32Mn AAP Singapore LX.AD80X .013 AS4935G-86 4G32Mn VHP32A TSG1 MC 9MGSHM512CEF 2*2G/320/ BT/6L/6R/ CB_n3_FP_1.0D_HG_ZH31_Bl ue UV C2DP8600 AS4935G- 864G50Bn AAP Thailand LX.AD80X.024 AS4935G-864G50Bn VHP32A TTH1 MC 9MGSHM512CEF 2*2G/500_L / BT/6L/6R/ CB_n3_FP_1.
203 Appendix A Model LCD VGA Chip VRAM 1 Memory 1 Memor y 2 AS4935- 581G16Mn NLED14WXGAG UMA N SO1GBII6 N AS4935- 581G16Mn NLED14WXGAG UMA N SO1GBII6 N AS4935- 581G16Mn NLED14WXGAG UMA N SO1GBII6 N AS.
Appendix A 204 AS4935- 583G16Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXG.
205 Appendix A AS4935- 583G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 583G25Mn NLED14WXG.
Appendix A 206 AS4935- 593G16Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 593G16Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 593G16Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 593G16Mn NLED14WXG.
207 Appendix A AS4935- 733G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 733G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 733G25Mn NLED14WXGAG UMA N SO2GBII6 SO1GBII6 AS4935- 733G25Mn NLED14WXG.
Appendix A 208 AS4935G- 644G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO2GBII6 AS4935G- 644G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO2GBII6 AS4935G- 644G32Mn NLED14WXGAG 9MGSH.
209 Appendix A AS4935G- 644G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO2GBII6 AS4935G- 644G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO2GBII6 AS4935G- 644G32Mn NLED14WXGAG 9MGSH.
Appendix A 210 AS4935G- 733G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO1GBII6 AS4935G- 733G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO1GBII6 AS4935G- 733G32Mn NLED14WXGAG 9MGSH.
21 1 Appendix A AS4935G- 733G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO1GBII6 AS4935G- 733G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO1GBII6 AS4935G- 733G32Mn NLED14WXGAG 9MGS.
Appendix A 212 AS4935G- 864G32Mn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) S O2GBII6 SO2GBII6 AS4935G- 864G50Bn NLED14WXGAG 9MGSHM 512M-DDR2(64*16*4) SO2GBII6 SO2GBII6 AS4935G- 864G50Mn NLED14WXGAG 9MGSHM.
213 Appendix A AS4935- 583G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G16Mn N160GB5.
Appendix A 214 AS4935- 583G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 583G25Mn N250GB5.
215 Appendix A AS4935- 591G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 591G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 591G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 591G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 591G25Mn N250GB5.
Appendix A 216 AS4935- 731G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 731G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 731G16Mn N160GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935- 731G25Mn N250GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW N AES1610 AS4935- 731G25Mn N250GB5.
217 Appendix A AS4935G- 582G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW N AES1610 AS4935G- 592G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP3x3MMW BT 2.0 AES161 0 AS4935G- 592G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP3x3MMW BT 2.0 AES161 0 AS4935G- 592G32Mn N320GB5.
Appendix A 218 AS4935G- 644G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW BT 2.0 N AS4935G- 644G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW BT 2.0 N AS4935G- 644G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW BT 2.0 N AS4935G- 644G32Mn N320GB5.
219 Appendix A AS4935G- 732G32Mn N320GB5.4 KS NSM8XS 6 in 1-Build in SP1x2MMW BT 2.0 AES161 0 AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.
Appendix A 220 AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 733G32Mn N320GB5.
221 Appendix A AS4935G- 863G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 863G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 863G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 863G25Mn N250GB5.4KS NSM8XS 6 in 1-Build i n SP1x2MMW N N AS4935G- 863G32Mn N320GB5.
Appendix A 222.
Appendix B 223 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of it s system functions are tested under Windows ® XP Home, Windows ® XP Pro environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
224 Appendix B Microsoft ® Windows ® Vista Environment Test V end or Ty p e Descriptio n Adapter 10001081 DEL T A 65W Adap te r DEL T A 65W 19V 1.7x5.5x1 1 Y ellow SADP-65KB DFJ LED LF 10001081 DEL T A 65W Adap te r DEL T A 65W 19V 1.7x5.5x1 1 Y ellow SADP-65KB BFJG LED LF 60002015 HIPRO 65W Adapte r HIPRO 65W 19V 1.
Appendix B 225 10001067 INTEL C2DT5800 CPU Intel Core2Dual T5800 PGA 2.0G 2M 800 MV , TJ, noVT 10001067 INTEL C2DT5900 CPU Intel Core2Dual T5900 PGA 2.2G 2M 800 MV , TJ, noVT 10001067 INTEL C2DP8400 CPU Intel Core2D ual P8400 PGA 2.26G 3M 1066 25W 10001067 INTEL C2DP8600 CPU Intel Core2D ual P8600 PGA 2.
226 Appendix B 60001994 WD N250GB5.4KS HDD WD 2.5" 5400r pm 250GB WD2500 BEVT -22ZCT0 ML160 SA T A LF F/W:1 1.01A1 1 60002036 SEAGA TE N320GB5.4KS HDD SEAGA TE 2.5" 5400rpm 320GB ST93203 20AS Crockett SA T A LF F/W:0303 60001922 TOSHIBA DIGI N320GB5.
Appendix B 227 Modem 23707801 FOXCONN TW Fox+Con MC4Z 1.5_3.3V Aus Foxconn Conexant -Unizion 1.5_3.3v AUS T60M955.0x Norhtbridge 10001067 INTEL PM45 NB Chipset Intel CS PM45NB 10001067 INTEL GM45 NB Chipset Intel CS GM45NB ODD 610105 HLDS NBDCB2XS ODD HLDS BD COMBO 12.
228 Appendix B VRAM 10000981 MISC 256M-GD2 ODM 256M-GD2 256M GDDR2 10000981 MISC 256M-DDR2 (32*16*4) 256M-DDR2 32*16*4 10000981 MISC 512M- DDR2(64*16*4) 512M-DDR2 64* 16*4 WLAN 10001067 INTEL SP3x3MMW.
Appendix C 229 Online Support Information This section describe s online techni cal support services a vailable to help yo u repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office.
230 Appendix C.
231 A AFLASH Utility 42 Antennas 107 B Battery Pack 54 BIOS Utility 29–42 Boot 40 Exit 41 Navigating 29 Onboard Device Configur ation 36 Power 38 Save and Exit 41 Security 35 System Security 41 Blue.
232 Mainboard 93 media access on indicator 10 MediaT ouch Button Failure 159 Memory Check 146 MIC Module 108 Model Definition 184 Modem Module 91 N No Display Issue 147 Notebook Manager hotkey 14 num .
An important point after buying a device Acer 4935G SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer 4935G SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer 4935G SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer 4935G SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Acer 4935G SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Acer 4935G SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer 4935G SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Acer 4935G SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer 4935G SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
