Instruction/ maintenance manual of the product 1Xpression III Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject 1 X pression III.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 2 1 1.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 3 Pro-Ject 1 X pression III Controls, features and connections 1 Motor transportation screw (marked red) 2 Steppe.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 4 Set-up The deck is supplied partially disassembled and carefully packaged for safe transport.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 5 Anti-skating force adjustment The anti-skating force must be adjusted corresponding to the downforce as follows.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 6 Maintenance and cleaning Your record player requires little or no regular maintena nce.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 7 Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory.
© Audio Trade GmbH · Pro-Ject 1 X pression III / Ortofon 2M Red · Revision 2012.7.1 8 T omearm transport look 2 motor transport screws (marked red) Lid Platter Accessories T onearm counterweight P .
An important point after buying a device Pro-Ject 1Xpression III (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject 1Xpression III yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject 1Xpression III - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject 1Xpression III you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject 1Xpression III will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject 1Xpression III, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject 1Xpression III.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject 1Xpression III. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject 1Xpression III along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
