Instruction/ maintenance manual of the product SLPA7000r MP2 Printronix
Go to page of 5
RFID Label Guide Specification Gen 2, Rafsec Short Dipole Antenna 182316-000 Rev C Page 1 of 5 Printronix Guid e Specification RFID Label 915 MHz, 96 Bit, EPC Class 1, Gen 2 Rafsec Short Dipole Antenn.
RFID Label Guide Specification Gen 2, Rafsec Short Dipole Antenna 182316-000 Rev C Page 2 of 5 Printronix RFID Label Guide Specification 915 MHz EPC Class 1, Gen 2 Rafsec Short Dipole Antenna 1.
RFID Label Guide Specification Gen 2, Rafsec Short Dipole Antenna 182316-000 Rev C Page 3 of 5 3.3.2. Adhesive interface to liner shall be un iform and exhibit the same release characteristics along the full length of the label. 3.4. Perforations Between Labels 3.
RFID Label Guide Specification Gen 2, Rafsec Short Dipole Antenna 182316-000 Rev C Page 4 of 5 3.7.3.1. Printable label facestock width with inlay is 6.6 " (167.6 mm). Maximum width of label construc tion supported by printer is 6.8" (172.7 mm) edge to edge.
RFID Label Guide Specification Gen 2, Rafsec Short Dipole Antenna 182316-000 Rev C Page 5 of 5 Figure 1. Label Layout All Dimensions in Inches Printronix RFID Label Requirements fo r Rafsec Short Dipole Inlay Viewed from F acestock Side 1.0" min x 0.
An important point after buying a device Printronix SLPA7000r MP2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Printronix SLPA7000r MP2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Printronix SLPA7000r MP2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Printronix SLPA7000r MP2 you will learn all the available features of the product, as well as information on its operation. The information that you get Printronix SLPA7000r MP2 will certainly help you make a decision on the purchase.
If you already are a holder of Printronix SLPA7000r MP2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Printronix SLPA7000r MP2.
However, one of the most important roles played by the user manual is to help in solving problems with Printronix SLPA7000r MP2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Printronix SLPA7000r MP2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
