Instruction/ maintenance manual of the product RW-12 Primera Technology
Go to page of 7
© 2010 All rights reserved Quick Start Guide Unpack and Inspect 3 Setup 4 Attach Label Stock 5 Operation 6 Specifications 7 511279-120110.
2 Notices : The information in this document is subject to change without notice. NO WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
3 Section 1: Unpack and Inspect Thank you for purchasing the RW-12. T he RW-12 Label Rewinder makes it easy to rewind large quantities of labels. Its perfect for use with Primera’ s entire line of LX- Series Label Printers and many other label printers.
4 Section 2: Setup The RW-12 Rewinder is fully assembled inside the box. However, to get started you will need to plug in the power cable, switch the unit on and install the stability stand. Please follow the instructions below to install the stability stand.
5 Section 3: Attach Label Stock 1. Locate a suitable core on which to rewind labels. The core should be equal to or less than the width of the liner width. 2. Remove the Chuck Support Bar by unscr ewing the thumb scr ew at the base. 3. Place the core on the chuck.
6 8. Before you attach the label stock print a header of approximatel y 2 feet (61 cm) of label stock. 9. Feed the header under the dancer arm. 10. Attach the stock to t he core using tape. 11. Turn on the rewinder. 12. Start your print job. Section 4: Operation During normal operation the following will occur.
7 Section 5: Specifications Maximum Roll Diameter: 10” (254 mm) C o r e S i z e : 3 ” Maximum Roll Width: 8.5” (216 mm) Minimum Roll Width: 1” (25.4 mm) Electrical Rating: 29V, 2.5 A Power Input: 100-240 VAC, 50/60 Hz Weight: 17 lbs (7.7 kg) Dimensions: 17.
An important point after buying a device Primera Technology RW-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Primera Technology RW-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Primera Technology RW-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Primera Technology RW-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Primera Technology RW-12 will certainly help you make a decision on the purchase.
If you already are a holder of Primera Technology RW-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Primera Technology RW-12.
However, one of the most important roles played by the user manual is to help in solving problems with Primera Technology RW-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Primera Technology RW-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
